Reviews
For CT110 HUNTER CUB
I used it to service the front brake on my new CT110 HUNTER CUB because it squeals just before stopping. I bought it because it was cheaper than others and the feeling was good. View detail
Very convenient
Until now, when replacing the pad, I had to use a large water pump pliers to push back the piston with the dustcloth while removing the pad so that the dustcloth would not wound.
I haven't used it yet because it's not time to replace the pad yet, but it will make the job a lot easier.
I am a little concerned about the durability of the body plate and the grips, which have only one spot weld, and the grips are only available in one color, Black/Blue.
View detail
It's a shortcut.
[How is it used?
Used to replace oil in front fork of TZr250R.
I have changed fork oil several times, but it took me a long time to check the oil level each time, so I bought this to save time.
Was the one you received as per Image?
It was just like the picture.
How was your experience with it?
As is often the case with Yamaha vehicles, the amount of oil to be removed from the inner fork is quite large, since the oil is filled to the top of the inner fork once and then removed to the specified level.
This product is quite slow to suck up Speed. (Piston is heavy) So in that sense, it takes a little time.
However, the work time itself is reduced, so it is worth having one if you frequently perform maintenance.
The scale was also measured by Caliper and was generally correct.
[Points to note]
You should think of a way to secure Fork so that it does not fall over since both hands are occupied.
How did it compare to other products?
I have not used any other products, but I was not sure if I should go with the one-handed guy from DRC.
The DRC seems to have a lower usable oil surface height, so we chose this product just in case.
【Review】
There were no problems with the product itself, and it shortened my work time.
It is not absolutely necessary, so please consult with your Wallet.
View detail
Convenient to have
Purchased to change the Fork oil in my Gixxer 250.
If I wanted to do it cheaply, I could have substituted various tools, but I bought this to make sure it was adjusted properly because it is an important part.
Will be replaced at the end of the year!
View detail
Fits: HONDA PCX125, HONDA PCX125, YAMAHA Remote control jog, YAMAHA Remote control jog, YAMAHA Remote control jog, YAMAHA Remote control jog, YAMAHA Remote control jog, YAMAHA Remote control jog, YAMAHA Remote control jog, HONDA Lead 90, HONDA Lead 100, HONDA Lead 50, HONDA Lead 90, HONDA Lead 100, HONDA Lead 50
Price is higher, but Socket is more secure
I purchased this product to integrate KOSO's PowerKit into my ADV150. The quality and functionality are perfectly acceptable, but I wish the price was lower; it is not Wallet-friendly to spend over 2000 yen for a dedicated product that is used only for the clutch lock nut. I think that as long as the functionality is solid, the finish could be rougher.
GlassesType Wrench is cheaper, but the clutch lock nut is only about 5mm thick even though the diameter is large. So I decided to go with Socket because of its high price and peace of mind.
View detail
Hmmm. A little difficult to use…
Purchased mainly to remove the Spring used for the Joint in the Exhaust System.
I remove it every time I change the Oil, so I think it is not easy to use, although it is used infrequently.
The long length of the handle and Hook makes it difficult to make fine adjustments.
It seems durable, so I will use it for a while.
View detail
A necessity for accurate and safe work
This time I used it for a W800 Fork oil change job, and there was nothing to worry about, and the fluid level position was accurate to the scale Quantity.:Set, and just suck it up with Syringe.
Before, it was difficult to check the liquid level using Scaleetc., and it took a lot of time and effort to check the liquid level position again and again.
I have used it about 4 times for oil change and overhaul since I purchased it, and the work is always completed in one shot very smoothly because the fluid level can be adjusted easily.
When using the Syringe to suck out the oil, it is important to do so carefully, keeping close contact with the top surface of the Fork.
Fork oil replacement is safe and reliable with a vertical fixture and this.
If I may say so, the scale may be a little hard to see. I check it many times before pulling it out.
View detail
It is easy to use
This is convenient.
The front brake is properly applied.
View detail
Good rigidity, normal use.
[How is it used?
For Caliper cleaning and OH.
Was the one you received as per Image?
It was bigger than I expected. No problem using it.
How was your experience with it?
It is not cheap and seems to be hard to break.
The grips are soft and easy on the hands.
The feeling of use was good.
How did it compare to other products?
I chose this product because I didn't want to buy a cheap one and have it break immediately or have the piston scratched all over the place. I am glad I chose this product because I clean the Caliper at a relatively high frequency.
If you rarely use it, you can go find something a little cheaper.
View detail
Is there a Large difference between any of them?
How was your experience with it?
The Brush is solid and will not rub against the Chain and lose.
The dirt seems to be removed well.
The grip is also easy to hold, and I said I have no complaints.
All Manufacturers are the same, but the straight Brush attached to the other side, the
I don't know what to use it for... I don't know what to use it for... I try to use it locally, but it doesn't work.
The Brush part is consumable, so it seems that BrushUnit Purchase can be done, but the Gold amount of BrushSingle Body is not enough to cover the cost.
Since there is not that much difference between the BodyGold amount and the Large amount, we recommend replacing the Body itself.
Since the position of the Brush can be shifted, it seems to be compatible with thin Chains.
I think this feature is very useful, and you don't have to worry about the Size, nor about the Chain
Even if you own Motorcycles of different thickness, they can be shared.
How did it compare to other products?
It is not there now, but there used to be a WeBigBrand one.
I can't even tell what the difference is, especially when compared to that.
I don't think there is that much difference between Manufacturers.
[Points to note]
Brush area must be cleaned after use.
If left sticky, it will stick and not come off the next time it is used.
I think it is OK if it does not become Black by moistening with Parts cleaner and wiping with Dustcloth.
Other items that would be helpful
Whether there are Included Parts:/ Items that should be purchased together/Opinions and requests to the Manufacturer
Repair's Brush should be cheaper.
This price does not make it Repair Parts.
View detail
It is easy to use for Piston that is not adhered.
Pistons that are not adhered can be used adequately. However, we cannot pull out a sticking Piston. If the piston is stuck, it is best to pull it out hydraulically. View detail
easy to work with
There is no rattling and the strength is sufficient. There are no problems in gripping, and the workability is good. View detail
It worked fine.
I bought this when I was replacing the Brake Pads on my W800.
Before I bought it. "It's cheap, but I wonder if it's large enough." I thought it was a good idea, but I am glad to say that I had no problems using it as far as I was concerned.
I think it's a little weak, so I'd say it's only for personal use.
View detail
I want to do this right.
[How is it used?
Used to overhaul the front fork of PCX
Was the one you received as per Image?
As per Image
How was your experience with it?
It came with an instruction manual, which was easy for beginners to adjust the oil level.
View detail
Good for your safety.
I thought it was a good idea to have it to remove dirt from the Chain, it was a good decision to buy it because Dustcloth can pinch your hands and be dangerous. View detail
Brake Caliper PistonMaintenance Pliers
Pliers for gripping the Piston of the Brake Caliper.
LargePiston has a concave center, so you can grab it from the inside with Pliers like this one.
This product is the part that grips the Piston (Black part in the picture) It has a butterfly screw to hold the piston in your hand, so it is easy to turn and move the piston.
However, because the above-mentioned ThornThorn hurts the Piston, it can be used without a sense of guilt when it is cured by winding Vinyl Tape.
All in all, it's a must-have for BrakeMaintenance.
View detail
For Repair.
It is a convenient repair parts that can be replaced only for the brush part, and I think it is an economical product. It's easy to replace and the cleaning power goes up with the new brush. View detail
This is enough for personal use.
I bought this for brake maintenance on my Motard 100. The grip part is blue, so the dirt is conspicuous when using it with dirty hands. The grip part is blue, so if you use it with dirty hands, the dirt will stand out. I think black would have been better. View detail
It was helpful
It's easy to grip and grips the piston well. It's so easy to use that I don't think I'll need to use the Fixing Screw.Recommendation. View detail
Chain cleaning essentials
I bought this product to replace a damaged chain brush I bought 4 years ago from Webig.
This brush can clean all three sides at the same time, but you can't see the tire side, so you naturally put a lot of effort into it.
I think it's broken.
It was an easy product to use, so I decided to use DAYTONA's because the shape is the same.
View detail