Reviews
Expect durability
I bought this because my long-time Socket was getting a little licky. 900SS Cowl removal is 4mm, so I use it a lot. I tried it out right away and the new one chews very well indeed, no more worries about Bolt licking it. View detail
Just the right length and very convenient
[How is it used?
Purchased to replace Oil in PCX125.
PCX is a little difficult to work with due to the position of the drain bolt, so I bought it to work more efficiently.
Was the one you received as per Image?
It is just as shown in the Image. It is just the right length, not too long and not too short. I felt that the texture is also good.
How was your experience with it?
I actually used it only once to change oil, and I am glad I chose the smaller size. There was a longer size as an option, but if I had chosen that one, I thought that I might not have been able to use it under a car body without space, so I am glad I chose the shorter one.
[Points to note]
Sometimes just a little bit of the tip is left on the Bolt side. However, it is usable without any problem, so Large is durable.
How did it compare to other products?
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
handy tool
I bought this DAYTONA long hexagonal socket from webike. It is a set of 7 pieces equipped with a 3/8 socket of 8-19MM. The socket is extended to 63MM to screw some deeper screws. A socket bracket is also given as a gift to store these sleeves well. The steel is of good quality and should last for a long time. -------------------------------------------------- -------- The DAYTONA long version of the hexagonal sheet I bought at Webike. It is a 3/8 sleeve with 8-19mm. The sleeve is extended to 63mm to twist some deeper screws. A socket bracket can also be given a good storage of these sleeves. The quality of the steel should be used for a long time. Powered by Google Translator View detail
DAYTONA 4 In 1 Hex Socket
About quality and texture - Top quality. Durable coating on socket keeps it looking in as new condition and the tool has a heavy feel to it indicating it has a solid steel construction. About the feeling of use - I misplaced my OEM single sized hex socket for my Buell and since OEM parts are now hard to come by the multi sized hex socket from Daytona is doing the job now for my Buell and and future motorcycles with any of these 4 sizes. Products to buy together - A breaker bar and torque wrench are needed to work along side this hex socket ti get the wheel removal and installation done correctly. Difficulty of installation - The hex socket is very easy to use, just fit the end into the axle with your needed size (Buell rear axles pictured for 24mm hex) and loosen or tighten as required. Cost performance and comparison with other products - Pricing is great for a multi fit tool that you can use for many applications. Can't find any issues with the quality, so don't look elsewhere if you are requiring this product. About shipping and packaging - Sea freight is my preferred shipping option and usually arrives in Australia in 6 to 8 weeks from dispatch. Always well packaged to ensure parts arrive safety and are ready for use. Any concerns, cautions, or advice when purchasing - If you are looking to add a breaker bar or torque wrench to use with this hex socket you will be needing a 3/8" drive tool. View detail
Reliable DAYTONABrand with high accuracy
I bought this product because it is a trusted DAYTONABrand. When I used it, I felt that the Bolt did not tamper and was very accurate. View detail
Yoshi Yoshi
I bought it because it is an inch size that I use occasionally, and I thought it should be inexpensive. 。 The texture and precision are not as high quality as the price, but I think they are sufficient for general work. 。 If you use it frequently, you will probably be dissatisfied, but if you buy it on the understanding that it is inexpensive, it is a very good product. View detail
Yoshi Yoshi
It's an Inch size that I use occasionally.
I bought it because I thought it was cheap enough.
The quality and precision of the product is not as high quality as the price.
I think it is sufficient for general work.
If you use it often, you'll probably be dissatisfied, but it's a good, inexpensive option.
It is a very good one if you are willing to buy it outright.
View detail
For Motorcycle Maintenance
[How is it used?
I was in a hurry to purchase this product because Bolt was used in one place during maintenance to stop tinkering.
only after careful inquiry Bolt with hexarobular hole I learned that it is called
Was the one you received as per Image?
As shown in the photo, this Socket can also be used for Type with Pin at Center.
Why does it say that it cannot be used for without Pinned Type?
How was your experience with it?
Until you use it. Are you sure this is what you want?" I was a little worried, but I was able to use it without any problems.
I don't know if Bolt is bad, but I was a bit concerned that the application was a bit shallow. I don't know if the bolt is bad or not, but I was a little concerned that the bolt was too shallow. I don't remove it too often, so it's enough.
[Points to note]
Quantity:It may not be a good fit for the Set but the Size is not abundant.
I think it is a common Size used for Motorcycle, so I don't think it is a problem, but for other uses, I think it is safe to look into Size.
How did it compare to other products?
Is it possible that the strength and precision of the tool is not as good as that of a well-known tool manufacturer? I think.
Well, I personally thought it was quite inexpensive, so if you use it infrequently, it's totally possible.
【Review】
It can be used enough for Motorcycle tamper-proof Bolt.
It was a special Bolt tool, but it was less expensive than I expected.
View detail
Helpful Items
Used for special LongCap Nut.
I only use KTC or Koken for the Socket, but I chose it for the special LongCap Nut.
Both KTC and Koken have deep sockets, but the effective inner length is only about 11mm, which does not fit long Cap Nut.
And I remembered DAYTONA's Socket, I had other Size, so I looked at it … perfect hexagon to the back.
I was able to use it properly.
I only use it once or twice a year, but it's safe to have.
View detail
Used for TPSSensor removal and installation in carburetor
I used it to attach and detach the special bolt that holds the throttle position sensor in the overhaul of the ZrX1100 carburetor.
I don't think that the strength and durability are the same as a professional manufacturer like KTC, but for a light application like this, I had no problem using it, and I can recommend it to everyone.
View detail
I bought this for my Transporter.
I recently purchased a HUSQVARNA, so I bought this as a transporter. The necessary Size is arranged, and the quantity of the smallest limit is:I love it so much with Set. If you drive a foreign car, it is convenient to have one. View detail
Licked Bolt
I was having a hard time finding a solution to my problem... and then he recommended this product to me.
I was able to get it off in one motion.
View detail
Harley maintenance.
I usually use KTC millimeter tools, but I didn't have the Inch tool, so I bought this one.
It is completely comfortable to use.
It was nice to be able to use the Torque wrench on the Caliper Bolt as it also comes with a 10mm 12-angle.
View detail
DAYTONA Socket Set for Hexalobular Hole (Torx with Pin ( R))
This review is for DAYTONA Socket Set for Hexalobular Hole (Torx with Pin ( R)). The packaging was professional and webike’s Shipped price was unbeatable. The quality of each socket is great and the metal holder to keep them together and in order is a great bonus. It’s great to have a set of these torx with pin center sockets around as specialized tools like this can quickly derail a well intentioned project. View detail
For hexarobular holes (Torque(R) )Socket set
I purchased Torque because I do not have it. Because it seems that usage frequency is not so high, the price priority is given.
I feel that there is some rattling, but I could use it without problems.
View detail
Amateur enough
I bought it for the maintenance of Harley.
I am worried because the price is cheap, but it is on par with the amateur, but there are no particular problems even if it is used frequently.
I think that it is a problem Level that PRO does not have any problem.
I think that it will not be damaged by buying it.
View detail
Front axle necessities for maintenance
It becomes a necessity item for maintenance of Front axle.
When I learned about this product, it was Scale from the eyes.
If you have this LargeSize's Hexagonal Wrenchetc. There is no need to buy.
9. The 5 sq hole is open and the four wheel tire wrench is suitable
Because it is Size, I am using it in conjunction with it.
Recommendation to keep those who do maintenance of Tire in tool box.
View detail
To maintenance of BMW
Since Bolt of BMW is all Torque, I purchased it from reliability and Cost performance. There was a rumor that too cheap things broke so we avoided it. Size has been narrowed down, but for now it is not inconvenient for easy maintenance. We will check durability etc. in the future. View detail
As Large type Hexagonal Wrench
When it comes to Hexagonal Wrench so far, it will be very expensive to purchase at Home center. However, this tool has four Size, very convenient. I think that Cost performance is a pretty good product! Small Size's hexagon is a Socket and Large Young Size is used properly according to the wind like this tool.
It is quite a recommended tool!
View detail
It is cheap and enough for a daily Maintenance. addition? Since it is helpful rather than 10MM which comes out and shines just considered, I am doing convenience of.
It is cheap and enough for a daily Maintenance.
addition? Since it is helpful rather than 10MM which comes out and shines just considered, I am doing
convenience of.
View detail