Reviews
DAYTONADAYTONA Oil drain pan
I will buy it if I get lost. After buying this item of goods
I tend to think that it stops, but the handle is very
Easy to use, height is also exactly good. Oil diffusion
I was not worried. (I pulled a newspaper downwards
I could not spill it at all. Once this container is filled with Oil
I saved it and transferred it to a waste oil processing box. It was easy trip.
View detail
Purchase
Up to now I was installing a regular Hose to remove air, but I bought this product to take a trouble and Brake fluid to ensure a reliable air bleed. Because it is One-Way Valve, it is good to be able to bleed air safely and easily because there is no reverse flow of Brake fluid. View detail
Handlebar's Bar End as Carbon Spec. In!
I changed the Bar End of GSR 250 to Carbon Look. The things on the picture are before construction and the ones below are after construction. When I switch to Motorcycle, it is always a Custom. I bought it for 800 yen, but I still have Seat left, so I will make various places Carbonized. It can be cheap, it is a recommendation Custom.
View detail
For bleeding CB and CYGNUS
I purchased it for the first time to exchange Brake fluid myself. Double-end Wrench etc, everything you need is set so it was good. Even if we put in two Oils, we still have room. There is no back flow or unusability. Even beginners can use with confidence, Large is satisfied with satisfaction.
View detail
For injecting Oil for mixing.
Mortgage Scooter 2st separation + mixture 100 : I use it for portable use. Even more capacity can be used, but in Helmet in this is about Large (capacity) It's easy to use.
Besides this Poly clean 100 ml, 500 ml can OIL is mounted on Helmet in.
View detail
Gasket exchange etc etc. To
Oil from Head cover It is easy to see leakage
I use it to a degree that it gently scratches the replacement.
Motorcycle I think that one is a thing to be more sustainable. Point cover exchange, Genie Cover exchange etc etc etc. Even though it will be Gasket peeling off.
I think that the use feeling is not good or not bad
It is an ordinary Oil stone (Lol)
View detail
For comparison
【What made you decide the purchase?】
BigGarage's previously purchased Wig. I showed the product to my friend, so I told myself that I also wanted it, so I bought it.
I tried to compare it with this DAYTONA product, so I bought a way that is not a BigGarage product.
【How was it actually used?】
Functionally it can be used without problems.
【Was it difficult to install? (Hard parts case)】
The back of Package is Instruction Manual, it can be installed relatively easily.
【Please tell me the point of installation and hang (in the case of Hard parts)】
Both of the Instruction Manual behind Package are distinguished as "Retainer" but they are described as Nylon washer of the No. 1 Right photo (It may be hard to understand because it is translucent ... ...) Through First Shaft. The second Clip from Right is the last.
Since it does not move to Smooth so much at the beginning, it is good to make a Grease up firmly in the groove of Shaft. Trying to forcibly move it here will cause breakage. It is good to repeat detachment several times until familiar.
[Is there anything I was disappointed about?]
Surprisingly big. Usually it is used to fasten the exterior, but if the base side is as much as 25 mm square, it becomes conspicuous so we need ingenuity to install.
Also, I am concerned that DRing does not become straight when tightened against Base mounting angle. Although there is no problem in function, it looks bad and I feel bad.
【Hope for Manufacturer - Please let me know if you have any improvement points]
When you shut down Shaft, you want me to make Ring straight.
【Have you compared items?】
Web BigGarage : Quick fastenerRing TypeQuantity : 1 Set of 2pcs.. It's really like the dimensions to the corresponding Size. Points that will not be straight when tightening Shaft, even to the poor initial movement. I guess that it is making at the same place.
Wes BigGarage products do not have any kind of Instruction Manual, but Nylon washer is Quantity : 1 Set attached a lot. Also, because it's a bit cheap, at first you should buy a DAYTONA product, a Wig BigGarage product when you get used to it.
[Others]
I am using it to stop the License Plate. Circuit It is convenient to quickly remove it when driving or maintenance.
View detail
One in a family?
I used carburetor's OH and Cylinder as gossyping.
Because it can be used for many purposes, it was convenient for a while.
If it is a little thin, I am happy to use it even in small places.
View detail
Just right Large Ki, EngineOH.
Overhaul the engine of MONKEY and bought it for face-finishing of Crankcase and Cylinder.
Home centeretc. I searched for, but I abandoned all with Large Yu Size.
Knowing that Oil stone is sold from DAYTONA, Large Kimono is exceptionally easy to use just right!
Surface finishing was possible without putting extra force.
Large If you keep it safely, it seems that you can still use it.
Reasonable and very handy.
View detail
Thickness Gauge
I purchased it for Tappet clearance measurement. Similar products from other Manufacturer are out, but the thickness - Compared to the number of sheets, I decided on this product. Size display is also easy to understand and easy to use. View detail
We were able to replace efficiently.
【What made you decide the purchase?】
When I exchanged Brake fluid, I thought that I could exchange work effectively and purchased it.
【How was it actually used?】
We were able to replace Fluid relatively effectively.
[Is there anything I was disappointed about?]
There is none
【Hope for Manufacturer - Please let me know if you have any improvement points]
There is none.
【Have you compared items?】
There is none.
View detail
Very well.
I purchased it because it was necessary to disassemble the Engine. Delivery time took a while, but it is acceptable range. I am extremely satisfied because it is a famous Brand. View detail
It is a reliable Manufacturer
I bought it to take the Gasket attached when disassembling the Engine. I decided on this product because it is a reliable Manufacturer. The price is reasonable so I'm very satisfied.. View detail
Motorcycle Necessities of messing?
It is often said that it is necessity of Motorcycle tampering, but since I started riding Motorcycle 16 years ago, except for under the Engine waist, I messed around one thing, but I never used it.
I used this time, I understood the meaning of necessities.
I knew that turning on Wound rather than turning Oil well, it was a good learning experience.
There was also someone's impression, but certainly "For the whole lifetime" Maybe there is ... (Lol)
View detail
Easy bleeding work
Brake, Clutchetc. When bleeding air, I used a slightly longer transparent Tube so far.
However, working with concern for air flowing backward was rather troublesome.
With this product, you do not have to worry about backflow, so work has become quite easy.
View detail
I used it for the first time.
After installing Bore Up Kit on GORILLA, Gasket's processing leaked well Oil so I bought it. There is nothing special because it seems to use only Oil and rub it lightly. The surface became beautiful and it seemed not to leak because I saw it.
Although durability is used only once, it is essential observation, but if you use about personal impressions after about 5 times you will be able to step and it will not be usable.
I will buy it again when it becomes useless because this price. Do not do this Oil leaked and buy Gasket again and work again Because time and Gold will be in vain...
It was a good learning experience..
View detail
Items essential for Motorcycle tampering
Crankcase, Clutch cover, Cylinder, etc. There are lots of sides around the Engine that are sealed by Liquid Gasket. When maintaining such a part, Gasket does not work effectively unless you finish the mating face smoothly, it is the source of unexpected Trouble such as Oil leakage.
So, it is essential item for those who do Motioncycle messing with DIY. If it is for personal use, I think that it is unlikely that wear out and run out, and the price is reasonable so 1 pc. We Recommendation to have.
View detail
It became hard to spill.
Until now, Oil was received at the BOX of the pla, but when transferring to a separate container of waste oil processing, there were many cases that it spilled on Sheng Large, but the Oil pan with Nozzle got less coarse Was.
By the way, us Oil amount at ZrX 400 : 3. 2L (Remove Filter) is.
Products are 3. I use a 5L capacity item, but when I receive an Oil it will accumulate up to 3 to 4 centimeters from the top.
Even if you lift the product by receiving Oil as it is, the container is solid without deforming.
Just when we process waste oil, wide mouth like shochu Plastic bottle (4L) I moved it, but carrying it is regrettable that Nozzle does not fit in my mouth ,,, I expect it to improve without using a funnel.
View detail
For Bore up incorporation
I bought it myself even though my friend had the same item and I borrowed it over and over but indeed it w
Because I got the Engine burning GRAND AXIS, I thought that I will try to Bore up while repairing it
Although I was using it even at work, I can use it for quite a while if I buy it once, and 1 pc. There is no loss
Besides Engine, if it is a Scooter, you can use it even when Crankcase Cover's Gasket remains halfway
If you have full Pull Jet oiler together, put Oil in there and it is easy to use
View detail
Case cylinder etc.
I bought the Oil stone of DAYTONA. It will be useful during maintenance such as taking BALI etc.. Large is exactly right. Crankcase etc. Before painting Seal agent I will lose irregularities and burrs etc. If you do not clean it will cause leaks later I think that it is convenient to arrange good tools
View detail