Reviews
It's simple, but it's enough
I used to use a plastic bottle and a silicon tube that I made by myself I bought it because it's not expensive
1 fluid for every 2 cleaning maintenance of the Caliper piston Exchange
This is functional enough
View detail
Good
It also removes the stickiness of the Gasket cleanly The roughness of the whetstone is also good I use it by soaking in Sewing machine oil There is no problem at all View detail
I think all the width needed for two wheels is covered!
Purchased to measure valve clearance, all the widths required for a 2-wheeler are covered The quality is perfect, too So no need to repurchase View detail
DAYTONA One-Way Valve Set
DAYTONA One-Way Valve Set brake fluid removal device from daytona is very easy to use. This saves time on removing brake fluid. or replace the brake fluid to bring in a new one and make the brake system have no residual symptoms Daytona brake pads are easy to use. Time to brake the brake oil. Or replace the brake fluid to re-enter. And the brake system has no symptoms. Make the brakes work.(translated by Google Translator) View detail
I'm glad I'm prepared
Net information with Bore up is necessary and there was it if it was prepared
I thought it was expensive and small
When I start working, it seems likely to lose considerable time if there is not enough satisfaction and conviction.
It might be thanks to Oil stone that I could do the first Bore up successfully.
View detail
First time use
Bore-Up Cylinder 6Piston Exchange First Experience While Original Collect information with Net without knowing what is necessary
I praised you as I thought it was wonderful as I thought I was purchasing and using this cheaper than storefront price.
After use, there is no next schedule that will not decrease much, but is it a living thing?
People who first up Bore up are advised to buy without fail
By the way, Sc Labor used 100 Dyson's.
View detail
This was good.
EngineHigh-Compressed Base Gasket I used it for finishing after peeling off.
Large seems to be Exactly in my hand, it was pretty cheap to use.
View detail
I wish I had stud bolt removerSet of KTC...
I did not buy it with Webike, but when I got this Remover set I thought regretfully that the four Remolver internal Roller surfaces were rusted... It is a material with price, so we would like you to use ginger, rust resistant Material.
Stud bolt remover of KTC previously purchased had no rust... Is commonplace?... Also, compared to KTC Stud bolt remover, I think that Roller's play and backlash are many... I am worried whether it will definitely bite with this...
I wish I had turned to KTC's Stud bolt removerSet and got to regret it.
Mail-in is 12. Not 7. I think that it will be 5. (It does not matter if you use Adapter... )
View detail
feel well.
On waist O / I used it for processing after peeling off Gasket with H. At first it sucks Oil quite a bit so I think I should use it after soaking it. I think that it is good as long as you do not use ease of use so much. View detail
Easy to use Large dress
I used it for finishing after removing Gasket by repairing oil leak from Cylinder head.
I finished it so that it does not hold down Oil infiltrated. It is half a year after repair, but there is no oil leak.
It may have been good if not used, but as a result oil leak has ceased, it was good to use.
View detail
Easy to use
Oil reception has Iroiro, but I am using some of the difference in Size of this product.
Depending on the amount of Oil, it will be quite heavy, but the kore is a solid product without deforming. Also useful when handling waste oil as well as handles.
It is Recommendation on goods firmly in proportion to price.
View detail
Choi rest Oil collection
Brake hose Purchase for Oil picking up in Master tank at the time of replacement
A little remaining Oil will become tantalized when Banjo is relaxed, but since it is too long, I can push all the way back and collect the remaining Oil.
I use it by cutting the tip and making the hole diameter Large. It can also be used as Oil replenishment when air is removed. With a small hole at the tip as it is, when you push it out Oil will pop out swiftly.
View detail
Necessary items for engine decomposition
I bought it for Head Gasketfor Replacement etc.. I had an Oil stone that I use when disassembling the engine of a car, but the size is Large for single cylinder Engine. This product was just right Size so I purchase it and use it.
Metal head gasket requires a clean surface unlike paper Gasket. Compression leak if you do not do it well - - So I have to apply Oil to Oil stone and carefully clean up the surface and assemble it.
1 pc for face finish. , 1 pc for taking BALI. Quantity of : 2pc. I own the Set. When you brush the corner of Gold genus for taking BALI, the planes of Stone will soon become useless, so I use them properly.
View detail
It can not be used as it is
I attempted to buy it for a moment but the results were staggering.
It seems to be a Material whose elasticity and adhesion of Hose are totally insufficient,
Fluid leaked from the part connected to Breather,
Eventually it was a disaster to slip away and scatter liquid.
Despite having fixed with Clip.
Brake fluid is hard to wash, it attacks paint and slides
Because it is a very bad liquid,
It really is a problem for such things to happen.
It means that I did not behave as expected.
Next time I think I'll install more resilient Hose.
For now it will not be usable.
Perhaps, is Breather for the thick Caliper?
I do not know if there are such things
View detail
For maintaining adhesion
In addition to Crankcase of Engine and others, I bought it to remove the old Gasket that adhered and stuck at the time of brand-new exchange of Gaskets due to desorption. Initially, we scraped the member surface roughly and used this finishing product. I am satisfied that it can cleanly remove the parts without hurting. If you do not do this process badly, the adhesion of the new Gasket will be worse, leakage, oil leak etc. I thought it would be the cause.
View detail
Is ease of use dependent on usage?
My primary use is after milling with Milling Machine in our house (Using End mill) I bought it for the finishing of.
There was nothing to mill yet, so I took Maniblo (ManifoldBlock) Relations that work for Manufacturer, Manibro's Valve built inside the company (parts) I tried using it for the hand finishing of the mounting surface.
It is impossible to flatten rough surface roughness or deep scratches, but it can be used with a good feeling for the final finishing of the surface once finished.
Just for my use and Cylinder, Cylinder head etc of Engine Displacement Volume which is slightly Large, it seems easy to use Large people who are about two years old. It is a little Small so I will keep it four.
View detail
I tried using DAYTONA Oil drain pan
With just good Large dress under the Motorcycle, Oil replacement was not a problem. Waste Oil 2. I think that it is about 7 L. When I moved the Oil to a waste Oil processing box I overflowed through the pouring spout. Perhaps, I think that it is easy to do if the amount of Oil is small. I would like to use it by tilting slowly next time.
People who use Oil drain pan for the first time think that it is better to practice with water filled in Tan in order to grasp the feeling of the pouring spout.
View detail
Feel like either way
I tried buying thought that I thought as soon as possible because Brake fluid exchange of three Motorcycle is done by myself on a regular basis.
The structure is Material : It is a very simple combination of an iron ball which becomes a lid in the cylinder of Aluminum and Spring for pressing it.
I immediately tried using Fluid exchange. Although the exchanging method is done with the air bleed Pump of the syringe type and when the air is difficult to escape, it is done by Pumping of the Brake lever but it is certainly a check valve but it is because it was not used until now, I can work on Smooth even without it, so I felt it was difficult to do it again if extra things were added during Tube. After all, I used only the first one and removed the second and subsequent machines and worked.
If you are familiar it's not necessary Parts but if you are unfamiliar it might be benefited.
View detail
Poly clean
I bought it for Brake fluid for Replacement.
I put new liquid in this container and used it.
It is easy to pour, but when putting out too much power Nozzle is thin so it puff out and it scatters though it is a small amount.
You can use it without any problem if you get used to it.
View detail
One further step
I bought it because it was saying with One-Way Valve.
The good point is easy to use.
And Hose is transparent and easy to understand.
It really did not regurgitate with it. Naturally or w
The bad point is that Hose is short. I think that it was easy to use if it was a little longer.
And it leaks. It may leak to the car model, but it leaks. It's also quite a bit.
So every time I give up leaking leaked, I washed it around with water and washed it when all the exchange was over.
So it is ☆ -1.
View detail