Reviews
Too Large to use for Scooter
[How is it used?
I bought this for Scooter Oilfor replacement.
When changing oil in the center stand of PCX125, it is difficult because there is no space to place a saucer.
Was the one you received as per Image?
I bought a Large size, but it was larger than I expected.
The texture was very good, and it looked like it would last a long time.
How was your experience with it?
With the Center Stand in place, I was able to change the oil, but the space under the Scooter and the size of the Oil Pan were too large, and it felt cramped and difficult to do so.
I am still glad I bought it, but I think I should have bought the One sizeSmallest one, because it is also very expensive.
[Points to note]
How did it compare to other products?
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
Requires some getting used to.
Too thin and spoiled in Bell Hammer's Nozzle.
Is it for a little thicker Nozzles like CRC?
Or is it compatibility with the car model? (Used on deRaster400 and GSR250)
We used it twice and returned to the old method of working with the Vinyl bag to stop and pour.
It also takes quite a while for the lubricant to travel through the Hose and come out from below.
The price is something I would be willing to keep for a trial, so I think it is a good idea to buy one to try it out.
It has been on the market for a long time, so I am sure it is useful for people who are used to it.
View detail
It's not what it's supposed to be used for.
I bought it to see if it could be used to prevent moisture from outdoor parking.
The actual rubber sheet is less than 1mm thick, so it sometimes picks up unevenness in the ground, resulting in puddles, but since I bought it, I will use it for a while.
View detail
Before you get into trouble for wrapping vinyls.
[How is it used?
Used for protection after Wiring process
How was your experience with it?
Compared to regular vinylite, it is much easier to use because the Tape thickness is thinner to begin with.
The adhesive itself is quite strong.
I even tried peeling it off after a few days, but the adhesive did not remain on the Wiring side.
It is more cost-effective to buy this vinyl than to use commercial vinyls and get into trouble.
[Points to note]
It is a little sad that the appearance of the roll itself is no different from that of a vinite.
View detail
On roadMain for people who clean regularly.
[Feeling of use]
Brush has 3 sides for quick cleaning.
The softness of Brush is hard.
Brush is hard and dirt bounces off when rubbed hard.
Brush is difficult to apply to small areas, so it is better to prepare a soft brush separately for hard stains.
(Points to note)
Brush width can be changed, but when the width is made narrower, the brush cannot be fixed and immediately comes off, making it unuseable.
View detail
To Harness Organizing
I used it to organize my own Harness. Easy to use! View detail
Fits: HONDA CB1300SUPER BOLD'OR, HONDA CB1300 SUPER FOUR SP, HONDA CB1300 SUPER BOLDOL SP, YAMAHA MT03, YAMAHA MT-07, YAMAHA MT-25, KAWASAKI NINJA400 (2014-), KAWASAKI NINJA400 (2014-), KAWASAKI NINJA400 (2014-), KAWASAKI NINJA400 (2014-), KAWASAKI VERSYS-X 250, KAWASAKI Ninja ZX-25R SE KRT Edition, KAWASAKI Ninja ZX-25R SE, KAWASAKI Ninja ZX-25R, HONDA NC750X, HONDA CB1300SUPER FOUR SP, HONDA CB1300SUPER BOLD'OR SP, HONDA CB1300SUPER FOUR
I'm going to scratch the Oil Filter.
Used to replace Oil and Filter in Versys-X250.
The previous installer seemed to have installed the filter in a very Torque and it took a lot of force to remove it.
The filter was quite wedged into the filter, so its removal was a bit odd. The filter is a discarded filter, so the M10
It was extruded with Bolt.
I would like a little more rigidity in terms of the feel when installing. It becomes floppy and makes me feel uneasy when I apply force.
Wrench removal after filter replacement is difficult because it is embedded in the filter to a small extent.
The M10Bolt cannot be used because it will scratch the head of the replaced Filter (put a Rubber or something in it and push it out?).
It works fine, and the cost is great, but the price is right.
View detail
![PREMIUM ZONE Cap boltCollar [for M8 Bolt].](https://img.webike-cdn.net/catalogue/images/15903/91926_1_TS.jpg)
The color is different because it is a good opportunity!
Since the OEM was a subdued color, we purchased a different color, Blue.
Since the Screen Offset Bracket is made by DAYTONA, it is the same shape and color as the Screen Offset Bracket.
Well, as long as it's beautiful, it's fine. In a way, it's also called individuality. 。 That's fine!
View detail
peeling off
I purchased this product in the hope that it could be used to remove Packing, Rubber, and Sealants.
The tip of the blade is a size and both tips are taper shaped, so it seems to be good for use.
View detail
Good quality but too much import taxes
About quality and texture : Very good quality About shipping and packaging : I bought for 31€ of parts and got 31€ more for import taxes : total 62€ for 10 pieces. It doubles the final cost and it must be considered before ordering... View detail
Good thing it came in a two-pack.
In the summer, when we replaced the radiator hose, two of the OEM hose bands reached their limits, so we had to use a hose band purchased at Home center as a stopgap measure. In the meantime, the Material:The Stainless Steel one served its function, but the band was 13mm wide and I didn't like the look of it.
When we went touring the other day, there was a small amount of coolant leakage from the hose that connects to the Radiator, which splashed around and stained a part of the Engine white. Needless to say, I washed the affected area as soon as I got back because coolant has a bad effect on the paint.
There were no coolant leaks for a while after the hose was replaced, so we assumed that the band had loosened. It might have been OK to retighten the band as it was, but we decided to replace the band because it might loosen again and we did not like the appearance of the band.
Among the many hose bands available, we selected the DAYTONA band, which is narrow at 8mm in width and can hold two hoses, but is also Reasonable. However, the Radiator hose at the location where I wanted to tighten is about 32mm in diameter, and this product can be used from 25mm to 50mm, but there would be a surplus of large size. Unfortunately, DAYTONA does not sell a product in the correct size.
I decided to replace the Band and broke the first one. I tightened the screws too hard to make sure they were tight enough, since they had leaked coolant, but the screws spun around and damaged the Band, rendering it unusable. The second one was tightened carefully and firmly, and the coolant leak was solved.
The second one was going to be used to replace the band on the Hose under the tank the next time I remove the tank, which is a shame. I regret that I was not careful when tightening it in.
View detail
It's neither good nor bad
I purchased this for use on my YZ125X.
It was installed without incident and I have no complaints.
View detail
Easy to roll
I used to use MalButylTable, but it was a bit of a hassle because of its thickness and the need to stretch it out before rolling it up.
The product is thin and can be rolled up like Vinyl Tape, and is easy to handle without being sticky like Vinyl Tape.
If you are doing Wiring processing, it is useful to have a roll of it.
View detail
Easy to charge
Purchased an additional Motorcycle.
It is convenient to keep Charger connected during the non-riding winter months!
Charger does well these days, just plug it in and it's good to go!
View detail
Constant replenishment
It would be useful to have it at the three-way junction.
Until now, we have cut off the head of the Bullet Terminal and substituted it with the Crimp section.
View detail
Not necessary unless you really need Torque
This is good for those who have room in their toolbox.
I bought it to remove the bolt from the undercarriage, but I had to use a torque wrench to tighten the bolt in the end, so this may not have been necessary if I had a Universal.
View detail
Spanner
I bought it as a spare tool for my 17mm Spanner, because I replaced the mirror with one made by DAYTONA. View detail
Hard Oil is hard.
It is hard to suck up hard Oil. View detail
DAYTONA but good vinyl made by TOYO
[How is it used?
I use it for protection when Wiring processed and for summarizing Wiring.
This time Quantity:This is my 2nd pc and I purchased Repeat.
How was your experience with it?
I used to buy cheap Vinyl Tape at Home center,
This Vinyl Tape is by far the easiest to use.
It is also a very good Point that does not leave a sticky glue when removed.
It is also stretchy and has just the right amount of adhesion.
How did it compare to other products?
Compared to Home center's cheap Vinyl Tape,
It is soft and by far the easiest to use.
I also think it is very nice to be able to choose between narrow, normal, and thick Tape widths.
[Points to note]
If you apply a little tension while pasting, and then paste without tension only at the end, you can get the same result.
It can be put up in a way that it is both beautiful and does not peel off.
View detail
Quantity:2pc. Set eye
Last time, I bought 1pc. for trial, not bad to use, but not good for the selling price and the texture with the fabric.
However, the Quantity:2pc. It is more convenient to have a Set, so I bought more because the selling price was lower.
Would I have bought more if it had been at the normal selling price?
View detail