Reviews
Too big, mostly for Wheel
[How is it used?
For undercarriage wash of Motorcycle
Was the one you received as per Image?
It is so much bigger than I imagined. It looks like the size of a car wheel brush. It has a Size feeling like a Brush for a wheel of a car.
How was your experience with it?
It is indeed flexible, but I think it is too big and not suitable for washing motorcycles. If it were half the size, it would be easier to wash the area around the rear shock and around the engine through the cowling, but I don't want to accidentally damage the paint with it.
It would be good for something like NAKED with an air-cooled engine.
[Points to note]
The bristles are too hard to wash painted surfaces, so it is mostly used around the feet and engine area.
[Opinions and requests to Manufacturer
Put it out half as fine as it already is.
View detail
I have checked the fit.
Strainer packing was too large to fit.
I had no choice but to reuse it, but there is no particular oil leakage.
I've checked the fit ….
View detail
It's available but ・・・・・
There was no description of the dimensions in the product description of the Webig; there is no description on DAYTONA's website either, and the dimensions can finally be found by opening the handling instructions.
Our car is a custom vehicle. The diameter of the hole where the grip fits is 36mm. The hole diameter is 36mm, and the width of the brake lever is 20mm.
If I had known before I purchased the product, I would have gone to ・・・・・.
The lever hooking part was also machined.
Prospective buyers should check their own car's BuRipSize.
View detail
Although convenient….
It is troublesome to remove the Caliper when removing the Wheel and protect it from scratches, and this product seemed convenient and had a good reputation, so I purchased it.
I think it is convenient that it can be easily stored, protected, and hooked up inside the Porch, but I don't think it will be used that often.
The fabric is thin and feels cheap. I would like to see more cushioning. I felt that the selling price is too high for the material.
View detail
How is the performance compared to other products when attaching and detaching?
The size fits well, but the power to bite the plug, which is the original purpose of the plug socket, seems a little weak. It's actually very loose. I may have purchased it without knowing the detailed product specifications, so I looked at the product description again, but what about it? There seems to be a lack of information about product specifications. -------------------------------------------------- -------- The size fits well, but the power to bite the plug socket is a bit weak. It's actually a very loose level. I might have purchased it without knowing the specifications of the product, so I looked at the product description again. It seems that there is a lack of information about product specifications. Powered by Google Translator View detail
Somewhat difficult to use
I'm glad it's reasonably priced, but it seems a little difficult to use…
It is not a consumable item, and I wish it were more expensive and easier to use.
The instructions on the back of the Package were easy to understand.
View detail
Ring cannot be removed. Tool won't fit.
The tip was too thick and the hole was too narrow for the z1 Master Cylinder to get the Ring. View detail
The equivalent device was sold at a bargain price in the home center. Although it is good since it purchased in order to float a mailing cost .. I think that it is quality.
The equivalent device was sold at a bargain price in the home center.
Although it is good since it purchased in order to float a mailing cost .. I think that it is quality.
View detail
Monozukuri Japan is a thing of the past
This is a replacement for a Brush (Manufacturer unknown) that I bought about 10 years ago.
good point
I think the costumers are good.
A bad point
・ Brush width can be adjusted according to Chain/Size. but when adjusting to a thin Chain, Brush cannot be fixed.
You will have to go to the trouble of using old newspapers or Vinyl gloves to grab the Grease-soaked Brush.
Two rows of adjustment grooves should be added.
I bought Brush about 10 years ago." and the structure is the same, no growth. Mr. DAYTONA, the venerable DAYTONA!!!
...in a TV commercial for Tooth Brush. Head is thin." If this Brush Head is also made thinner, it should be possible to reduce the overall width by about 5mm.
It improves workability by preventing interference with Nut around Chain case and Sprocket.
Others
I would like the employees of a company that handles Motorcycle products to be Motorcycle enthusiasts, to have a thorough knowledge of the actual products they handle, and to plan and develop them with passion.
View detail
Hard to polish the details...
I purchased this product for the purpose of shortening ChainMaintenance time.
It is efficient because it can clean three surfaces at the same time, but the bristles of the Brush are thick and hard, so it is difficult to polish fine details.
So I do a rough overall cleaning with a 3-sided Brush, and then polish the fine details with a pig-bristle Brush or regular tooth Brush.
In the end, I don't think it's much of a time saver...
View detail
Used when changing Oil
I bought this to receive the Oil flow when changing Oil.
The feel is what you'd expect, but...
A piece of Corrugated cardboard or a gum Tape would be sufficient.
I couldn't deny the feeling.
If you use it, you'll want to clean it up with PartsCleaner, and when you do...
What a cosmetologist.
It's a goof. I'm sorry.
Things are good.
View detail
Fits: HARLEY-DAVIDSON DYNA Family, HARLEY-DAVIDSON SOFTAIL Family, HARLEY-DAVIDSON TOURING Family, HARLEY-DAVIDSON SPORTSTER Family, BMW R1200GS, BMW R1250GS, BMW R1200GS Adventure, BMW R1250GS Adventure, BMW R1200RT, BMW R1250RT, BMW R1200R, BMW R1250R, BMW R1200RS, BMW R1250RS, BMW K1200S, BMW K1300S, BMW K1200R, BMW K1200R Sport, BMW K1300R, BMW K1200GT
It fits all BMWs, but...
I was looking for a wrench to replace the oil in my F900XR, but I couldn't find one that fit, so I bought this one that fits the F800 system. When I tried it, the unevenness did not fit and I could not use it.... As a result, I was able to open it by sticking the driver. I realized that it is a large thing to confirm the suitable car model. The product is safe and stable DAYTONA, so I think there is no problem. View detail
Too much water absorbency.
I thought the absorbency would improve after a few washes, but not at all.
Other Micro fur bar towels smoke well, but this one doesn't absorb at all.
It's a shame because it's cheap and the large size is just right.
View detail
I don't think it fits...
I couldn't figure out why it was exclusive to 2Valve, so I bought it to try it out.
As a result, the duplex Spring could not be pushed off by hand and could not be used.
For use with Mini bikes.
View detail
Brake fluid replacement didn't seem to have much effect.
I used it to suck out Brake fluid. General Material with volume:PlasticSyringe.
It didn't suck air to the heck and worked fine.
Some of the imprints are. "Fluid makes the print disappear. but it didn't really go away in DOT4.
Well, the problem of the most Large is that the Fluid replacement by the suction out that I tried for the first time was not as smooth as I thought, and I thought that the One-Way Valve would be better…….
View detail
not so bad
[How is it used?
We have used it 3 times to wash the Spoke wheel.
Was the one you received as per Image?
The Flexible part of Flexible does not bend without more effort than I expected.
Other than that, the product was almost exactly as pictured.
How was your experience with it?
I used the 17in. Spoke wheel because it is a MOTARD wheel.
I didn't wash the small parts such as the base of the Rim side Spoke as much as I thought I would.
I don't think I'll be buying it again after using it about three times through trial and error, although my usage may be bad.
It is more satisfying to use your own hands to wash with Sponge and feel clean. (It's cold)
[Points to note]
The white part of the Sponge is caught in the Spoke, and it comes off.
I don't think I'll go bald any time soon, but it's kind of sad.
How did it compare to other products?
I have never used this type of product from another company, so I can't compare.
View detail
You can't have hard ends.
I could not Cut the hard end of the PillowGrip on the Pro taper.
I stopped because the iron part of Cutter was deformed while I was beating it.
I bought it for this...
Since the Material is iron, I thought I could make the cutter part a little sharper.
The kratom crackers in the picture cut it with no problem.
I don't know if it's because I don't care too much about the finish, but as others have said, the holes are definitely a little gapped.
If you don't mind, it might not be a problem.
It's not a tool I use often, and the price seemed a bit high, so I didn't change it for a long time.
If it was about $1,500, I would have bought it sooner.
I thought it would be nice to have a plastic Case to store everything in!
View detail
Disappointing.
I bought it for StemMaintenance of GB250, because it was correspondence Nut diameter:36-48mm.
If you try to put 3kg of force on the Stem, it will come off in the middle because the hook is too shallow.
If you have a small Torque, you can do it while holding down the Wrench with your hand. ・・・・
I'd like to make the inside radius a little larger.
View detail
Fits: HONDA CB1300SUPER BOLD'OR, HONDA CB1300 SUPER FOUR SP, HONDA CB1300 SUPER BOLDOL SP, YAMAHA MT03, YAMAHA MT-07, YAMAHA MT-25, KAWASAKI NINJA400 (2014-), KAWASAKI NINJA400 (2014-), KAWASAKI NINJA400 (2014-), KAWASAKI NINJA400 (2014-), KAWASAKI VERSYS-X 250, KAWASAKI Ninja ZX-25R SE KRT Edition, KAWASAKI Ninja ZX-25R SE, KAWASAKI Ninja ZX-25R, HONDA NC750X, HONDA CB1300SUPER FOUR SP, HONDA CB1300SUPER BOLD'OR SP, HONDA CB1300SUPER FOUR
I'd love to have one of those.
No problems with the product itself.
It is difficult to understand the consistency of the body and the model number on the HP.
I would give it an overall ☆☆.
When replacing the Oil Filter, the wrench was stuck and removed Large.
View detail
Fits: SUZUKI SKYWAVE650 burgmanLX, SUZUKI DL1000 V-STROM650X, SUZUKI DL1000 V-STROM1000, SUZUKI DL1000 V-STROM650, SUZUKI GSX1300 HAYABUSA, SUZUKI V STROM 650, SUZUKI V STROM 1050
I used it in my last semester's GSX1300R HAYABUSA.
I used it with the GSX1300R HAYABUSA in the last term, but it is not useful.
If you are planning to use it on the GSX1300R HAYABUSA, I strongly recommend that you do not use it.
Even if you can put this product in your motorcycle, you can't use it because the tools won't fit in the bike.
Because of the softness of the material of this product, it is easily dented.
View detail