Reviews
I tried to exchange Seals.
I tried to replace the oil seal on the crankshaft of my LEAD125.
I couldn't replace it because the bracket was pulled out of the grip and the end of the pin was deformed.
I don't know if the strength is too weak or if only a smaller seal can be pulled out.
View detail
I feel like I've been cheated.
To be more precise, this tool can only be used to remove the Pulley side and to install the Clutch Side.
We don't use Rose's because it is Air, but we wanted to use it for Torque management when embedding...
I managed to fool them into thinking it was better than nothing.
View detail
Fits: HONDA CB1300SUPER BOLD'OR, HONDA CB1300 SUPER FOUR SP, HONDA CB1300 SUPER BOLDOL SP, YAMAHA MT03, YAMAHA MT-07, YAMAHA MT-25, KAWASAKI NINJA400 (2014-), KAWASAKI NINJA400 (2014-), KAWASAKI NINJA400 (2014-), KAWASAKI NINJA400 (2014-), KAWASAKI VERSYS-X 250, KAWASAKI Ninja ZX-25R SE KRT Edition, KAWASAKI Ninja ZX-25R SE, KAWASAKI Ninja ZX-25R, HONDA NC750X, HONDA CB1300SUPER FOUR SP, HONDA CB1300SUPER BOLD'OR SP, HONDA CB1300SUPER FOUR
What's up, DAYTONA!
I used their Filter wrench for 10 years on my XL1200C SPORTSTER 1200. It was very accurate and easy to use.
When replacing the filter on the NC750X, we had no hesitation in purchasing Wrench from the company.
Although it fits Firmly with no problem in accuracy, it slips paca-paca-paca when Torque is applied and cannot be loosened.
The steel plate is not rigid enough and seems to open its mouth.
I had no choice but to purchase a KTC casting separately. This one is a one-shot OK!
When I installed their ReplaceOil Filter later, I tried to loosen it with this Wrench to test it, but it still crackled & hellip;.
I know you are a longtime seller and there are a lot of users, but are you Large sturdy?
View detail
Does it serve the purpose of a dedicated tool?
I bought this to use on an overhaul of an old brake master as described in the product description. It is true that I can grab the C-ring at the back, but as soon as I grab it and try to pull it out, the tip part broke off.
Since it was used for only a few minutes, we wonder about its Cost performance as well.
I wasted my time and Gold, but I still decided to buy a special tool from ToolManufacturer.
View detail
Other people's impressions were correct. It is hard to use.
I was curious about this product, but apparently it was not the feel I was looking for. I found that the Brush that came with the Tane Cleaner was easier to use. I think it depends on how much you want to clean. I think that people who use TEHN Maintenance are the ones who want to make it polished, so I think that a bristle brush with moderately long and soft bristles would be better. The included Brush was easy to use. View detail
If the payment is by Silver bank transfer, you will be contacted separately, I don't know how to contact you.
I don't know how to do Cancellation, give me your contact info. View detail
I would like to cancel this product.
How do I make a cancellation? View detail
I want to do Cancellation!
I'd like to cancel my reservationHow do I cancel my reservation? View detail
Cancellation
I'm pissed off, I can't cancel anyway, I want my Gold back. View detail
Cancellation.
This product can only be used for Honda motorcycles. View detail
I broke it the second time.
It's easy to use with a complete set of Hose and Attachment to connect.
However, the second time I used it, the Engine started with the Valve open and broke. Of course, it is written in the instruction manual properly, but I did not raise the rotation, and I only turned the Cell long because the startability was bad during the carburetor adjustment. It is the cause of carelessness because it is not used frequently, but if it breaks so easily, I want you to put a Caution label on the Plate part.
I asked DAYTONA if it was possible to repair it by email, and they suggested 4,500 yen for a new RepairGauge ×4 pieces = 18,000 yen. (This is the reason why I got 1 star)
Too bad because I thought it was a trustworthy Brand. I hope After Service will improve in the future.
I've already broken mine, but if you're buying one in the future, be careful.
View detail
It's broken
I used it as soon as it arrived and it broke… View detail
Pressure leak in one year
After one year of purchase, the pressure can no longer be held.
Looks like there's a pressure leak somewhere! A disappointing product
View detail
Fits: BMW R850RT, BMW R850R, BMW R850R, BMW R1200ST, BMW R1200S, BMW R1150RS, BMW R1150RT, BMW R1150R, BMW R1150GS, BMW R1150GS, BMW R1100S, BMW R1100RS, BMW HP2 SPORT, BMW R1200RT, BMW R1200RS, BMW R1200R, BMW R1200GS, BMW R1200GS Adventure, BMW R900 RT 03-13, BMW HP 04-08
The build is fine.
I bought it because it's a pain in the ass to get the in-vehicle tools out.
It didn't work on the R1100RS.
It's a shame that the R1100RS was included in the fitment.
View detail
Poor quality
It's totally useless because the head is stuck and can't reach the Valve I bought it because it's a DAYTONA product and I trusted it, but it didn't work Disappointing View detail
Fits: HONDA CB1100, HONDA FORZA Si, HONDA FORZA Z, HONDA FORZA Z ABS, HONDA FORZA(MF08), YAMAHA MT-07, YAMAHA XVS1300A, YAMAHA YZF-R1, SUZUKI DL1000 V-STROM1000, DUCATI 1098, DUCATI 1098S, DUCATI 1198, DUCATI 1198R, DUCATI 1198S, DUCATI 1199Panigale, DUCATI 1199Panigale R, DUCATI 1199Panigale S/Tricolore, DUCATI 1981 1098R, DUCATI 669 MONSTER S2 S4R, DUCATI 669 MONSTER S2 S4RS
It can not be used for Duke 125.
The outer shape was thick, and it did not reach Plug.
Manufacturer also wanted to check not only the plug size but also the plug hole of the real car.
Everyone, please take care.
View detail
The lowest
Write it honestly?
Adjust interval adjustment part
Clearly, it does not work
Is it the same structure as MONKEY Wrench
With the influence of the severity of the rattling which is unthinkable
It does not move...
The value of the price is There is none.
View detail
It can not be used as it is
I attempted to buy it for a moment but the results were staggering.
It seems to be a Material whose elasticity and adhesion of Hose are totally insufficient,
Fluid leaked from the part connected to Breather,
Eventually it was a disaster to slip away and scatter liquid.
Despite having fixed with Clip.
Brake fluid is hard to wash, it attacks paint and slides
Because it is a very bad liquid,
It really is a problem for such things to happen.
It means that I did not behave as expected.
Next time I think I'll install more resilient Hose.
For now it will not be usable.
Perhaps, is Breather for the thick Caliper?
I do not know if there are such things
View detail
weak?
I chose DAYTONA as a reliable product if it's a product. Usability is good, balance adjustment is completed easily. However, since I changed the setting of carburetor about a month later, I set it again, and Gauge got 1 pc. It does not move at all, another 1pc. Even Gauge's swinging is slightly different from a normal needle.
Measurement etc etc. , Open Throttle with Valve open. I knew that it would be damaged if I performed the operation, so I was using it carefully enough and it has broken even though I did not do the wrong operation. I have two months to buy it yet. It probably is a product not covered by the warranty because there was nothing like a warranty card, but it has been broken too easily, you can not trust DAYTONA anymore.
Regrettable though it was a good product except durability.
View detail
Unfortunately there is nothing to see
Since there is no actual thing left, I could not prepare photos.
Seal Pick Tools has used only Astro and this DAYTONA, but this DAYTONA product does not work at all. I do not want to write such a thing, but the Gold genus is very soft, it gets bent easily and it becomes useless. The products of Blue and Black's Grip of AstroPRO Dakutsu are quite strong and easy to handle, but unfortunately DAYTONA's products can not be used practically.
View detail