Reviews
For handling bare Wiring.
[How is it used?
The 27 year old Serow 225we rear blinker that I use for mountain play has developed exterior damage and poor contact, and I have decided to replace it. Wind for SEROW I purchased a new Blinker that is a crackpot Blinker.
It is common for cheap external blinkers and tail lamps, but there are many products that do not have the wiring integrated (it can't be helped that the wiring terminals are supposed to be processed...). I purchased this product because I wanted to do an OEM-like treatment.
How was your experience with it?
This product is used by cutting the end of the wiring wire through this product to match the length of the wiring wire, but it looks as good as an OEM product.
If we had treated the wiring as bare, we would have been concerned about durability and weather resistance, but this product is convenient in that respect and may have played a role in preventing unexpected trouble with electrical components.
It is also 2m long, so depending on the vehicle, it may be a good value product since it can cover 2 to 3 Wiring.
How did it compare to other products?
I have never used other companies' products of this type, so I can't compare them, but I guess there is not much difference in Large.
It has been in use for about two years, and so far no surface hardening or other deterioration has been observed, probably because it is not constantly exposed to ultraviolet light because it runs inside the exterior.
[Points to note]
There are several different sizes in the lineup, depending on the thickness and number of wires you want to cover. So, please check carefully before you buy.
This is not a type of harness tube that shrinks when heated, so please check it carefully before purchasing.
Other items that would be helpful
The deciding factor in the purchase
[How is it used? This is a duplicate of what I filled out in the column, but when I searched Webike for an OEM-style Wiring process, it was a product that was eligible for Timing Good Sale.
【Included Parts:presence or absence】.
This product is only 2m long and is a very simple package.
[ITEMS TO BUY TOGETHER
Harness tape to stop the border between this product and the wiring, coupler or Bullet Type Terminal to connect the wiring of other brand products to the OEM product, and various types of wiring for when the wiring of the external electrical components is too short, WiringCaulking Tooletc. to install them, you will be able to work smoothly until installation.
Opinions and requests to Manufacturer.
I know this is not a product that will always sell well, but there will always be people who need it, so please keep selling it as long as you can.
View detail
Purchased for Wiring handling
Quantity of electric wire:However, since we used Bullet Type Terminal to extend the wires, it was the right choice (even this product was quite limited when we tried to use Bullet Type Terminal). (When I tried to pass through the Bullet Type Terminal, even this product was quite limiting). The thickness also looks sturdy and good. View detail
Price increased but quality is good
We use it to store cords for bicycles and security cameras as well as motorcycles.
Motorcycle electrical systems can be improved simply by using a harness tube like this one.
Unique to amateur DIY "Messiness." disappears and becomes Stylish.
Also, it's UV and stain protection, so RECOMMENDATION!!!
The unfortunate part is that the price has gone up… even though it's only a few hundred yen, the original price was low.
Pretty disappointed, but the quality is as good as ever, so I'll keep buying!
View detail
It was not very practical.
[How is it used?
I wanted to use it to consolidate and redo Wiring, which is why I decided to purchase it.
How was your experience with it?
It was not very practical, as it lacked elongation and did not fit very well through Wiring.
Wiring is also limited to about two wires, and only HornWiring can be used.
How did it compare to other products?
I think Heat Shrink Tube was better.
[Points to note]
I thought the thicker Harness tube was better because it was more universal.
View detail
DAYTONA Harness tube
[How is it used?
When replacing the blinker, the blinker is replaced with a new one. Wiring was used for protection and waterproofing.
How was your experience with it?
I bought a longer one, so I wondered if it would be too much. I thought it would be a good fit, but it was surprisingly just right.
I think it is supposed to be thermo-compression bonded, but I fixed it with inHemp palmac and harness tube.
How did it compare to other products?
I have not purchased any others, but since they are not expensive and sold by DAYTONA, I think this one will suffice.
View detail
Required for Homebrew Harness
I use it to finish my homemade Harness.
I use this to protect my Wiring as it is basically a no-no to leave it naked.
I think it could be a bit cheaper.
It's expensive to use a small package.
It is very helpful that they are readily available at supply stores.
View detail
It is easy to use
It is safer to use a double coating for power wirings
I often use it because it is easier to handle than Colgate Tube
φ8 Tubes 1.25sq wire Quantity:The 2pc can easily pass through
Photo from Battery (1.25sqxQuantity):(2pc) I'm going through Wiring
The M6 Hoe Type Terminal can be threaded with it attached
It is just a PVC tube though it is for wiring, and there is no indication about the pressure resistance and heat resistance
It would simply protect the wire from mechanical rubbing, etc
How manyQuantity in the toolbox, as it is ready to use when needed and the 2m is used up quickly:These are the Parts you'll want to set or prepare
View detail
It purchases for protection of wiring. since it is a possibility [ of stopping changing and passing ] size, a coupler, a plug, etc. coming out if it does not cover first -- cautions.
It purchases for protection of wiring.
since it is a possibility [ of stopping changing and passing ] size, a coupler, a plug, etc. coming out if it does not cover first -- cautions.
View detail
For HID (H4) ... In order to make it crawl on the bottom of - zephyr tank for extension cord protection.
For HID (H4) ... In order to make it crawl on the bottom of - zephyr tank for extension cord protection. View detail
It is very convenient when rebuilding, harness processing and. I have also satisfied appearance well. Although pains were taken to put in wiring at first, when having held the hang, it came to enter simply.
It is very convenient when rebuilding, harness processing and.
I have also satisfied appearance well.
Although pains were taken to put in wiring at first, when having held the hang, it came to enter simply.
View detail