Reviews
connector set
Quality and texture information is no different from the std product It is compatible with Honda Std products for its usability You should have a wire stripper to buy together It's easy to install Buy based on cost performance and comparative brand preference with other products WeBike packaging is always great, arriving in a week for delivery and packaging Concerns, precautions, or advice on purchase If you connect the cable incorrectly, it is difficult to reunite There should be no failure from the beginning View detail
Connect to SMART
Used to pull power for USB to XSR900 (RN80J).
It can be connected exactly to the standard DCJackCoupler for Option.
I am satisfied with Large because I was able to connect neatly without doing anything unnecessary.
View detail
waterproof coupler
I used Daytona license lamp coupler 2 pole to connecting DiodeDynamic Led pods SS3 on Ducati StreetFighter 1098, the coupler and terminal included can be easily to install. With waterproof coupler I can install outside to easily remove the led SS3 to use for another bike. View detail
Left
We used it for a completely self-satisfying Custom, converting Blinker's Wiring from Bullet Terminal to Connector.
Since it is orange, it is Leftfor Blinker on Honda vehicles. For external Blinker, Wiring is a different color from OEM such as BlackRed or BlackWhite, so it is a Connector color with Quantity:Pair (for Left and Right) It is also advantageous to be able to determine the
Although the Bullet Terminal does not cause any problems, we decided to replace it with the 6V MONKEY/GORILLA Main Harness in conjunction with the re-pulling of the 6V MONKEY/GORILLA Main Harness.
The blinker used is the Unbreakable lensMINI, which has a similar connector, but the shape of the connector is slightly different from that of the product in question, which appears to be a connector for XR100MOTARDetc.
I purchased this product by mistake. but you can pull the Wiring out of the Blinker's Connector and plug it into the product in question.
The only use I can think of is to purchase it for repairs on adapted vehicles, but if you replace the Bullet Terminal, it will make it easier to follow the Wiring. It will be easy to tell at a glance if it is a BlinkerWiring afterwards.
View detail
Replacement from Bullet Terminal
We used it for a completely self-satisfying Custom, converting Blinker's Wiring from Bullet Terminal to Connector.
Although the Bullet Terminal does not cause any problems, we decided to replace it with the 6V MONKEY/GORILLA Main Harness in conjunction with the re-pulling of the 6V MONKEY/GORILLA Main Harness.
The blinker used is the Unbreakable lensMINI, which has a similar connector, but the shape of the connector is slightly different from that of the product in question, which appears to be a connector for XR100MOTARDetc.
I purchased this product by mistake. but you can pull the Wiring out of the Blinker's Connector and plug it into the product in question.
The only use I can think of is to purchase it for repairs on adapted vehicles, but if you replace the Bullet Terminal, it will make it easier to follow the Wiring. It will be easy to tell at a glance if it is a BlinkerWiring afterwards.
View detail
thrilling
The ShiftIndicator installation on the CROSS CUB is
Does it seem to have become a standard?
Original, not commercially available.
I really wanted to create it, so I bought it.
It was a combination with the existing Coupler.
It is finished without any problems.
View detail
Coupler reassembly
I bought this for reassembling Caphler, but it is too useless!
Anyway, it bends.
Bends even when neatly inserted.
In the end, the tools I made myself were the most useful.
View detail
Used for Wiring processing
Used for Wiring processing.
I am very satisfied with the quality and the many types of products.
View detail
Create your own Shift indicator
I used it as a connection to create a Shift indicator, TAB, receptacle clicked in and there was no situation where it could be removed.
I found the exclusive products to be excellent.
View detail
Easy to pull out, incomparable to Radio pliers.
This product is a special product, and the Connector can be easily disconnected. The trouble I had to go through with the Radio pliers was now a complete waste of time and effort! View detail
Frequent occurrence around Handlebar
I used it for a simple Kill switch Wiring recombination.
It's simple and I didn't have any trouble with it, but it's not suitable for areas where waterproofing is required.
There was also an assortment of products such as the Deutsche Coupler, so you can choose the right one for your location!
View detail
Rather than looking for it at an electronics store.
Although there is a problem with the Coupler color of White or Black, DAYTONA's Connector is convenient when you need it anyway.
I can't be bothered to go to an electronics store or Monotaro to order one of these.
View detail
Only one of them.
I bought this Coupler with the intention of using it to repair the Meter area, but I didn't need to replace the Coupler, so it was in my inventory. The other day, the Blinker stopped working and the Blinker relay needed to be replaced, so this Coupler came into play.
The posh Blinker relay that was broken had a wire and Coupler so I just had to connect it to the Coupler on the car body side, but this time I had to use a cheap Blinker relay that needed to make a Wiring to install. Since the Blinker relay to be used is the one of 2 tracks, I relied on the Blinker relay made by posh which was broken, and used the Female side of Coupler and the line Quantity of 0.75:2pc、Plain Type TerminalQuantity:2pc. When I made Wiring with Set and connected it, Blinker came to work normally. This time, because I used a cheap blinker relay, I made the wiring longer and moved it to the position where I can replace the blinker relay without removing the tail cowl when it breaks.
As for the Coupler, the terminal was firm, and the connection with the Coupler of the car body side was also smooth and there was no problem. I don't know if I'll have to use it this time, because I only used the Female side, but I'll keep the Male side in the bag. There was no extra terminal in this Coupler set. I would be grateful if you could include a spare one pc at a time, as sometimes amateur work can go wrong.
View detail
Power supply
It is a purchase as a Connector for the power distribution from the Meter part.
The shop in my neighborhood didn't have 9PType in stock.:Set had the lowest sale price on this product, which is a big help.
View detail
Also for OEMHarnessRepair
If you want to do WiringCustom such as Blinker, this is the one to choose.
Even Other Brand Products with Bullet Type Terminal can be SMARTly connected to OEMHarness for older vehicles with this.
It is possible to make a reliable connection and make Wiring easy to understand for anyone to see.
In my case, because the nail of the Connector of OEMHarness was broken, and it came to come off when a little force was applied, I pulled out the terminal this time, and used only the attachment of One Side of Connector.
Now I can run with peace of mind. It's a small thing, but I hope they keep selling it.
View detail
The Same Shape as OEM
I bought this one to use for my Side Stand Can Engine Starter Motor, I was looking for the same color as the OEM but couldn't find it and it looks like they don't have it, so I bought this one with the same shape.
The shape and so on are the same as OEM, so it is not a problem, but Male, Female, Tweezers, but the selling price is reasonable.
View detail
For taking out the power supply of MT-07
Used to take out the power supply that is prepared for the Option of the MT-07.
For MT-07, 12V is prepared under the tank with this Connector.
The TAB and receptacle are both needed to get the power out of here, so this product was Exactly what I was looking for.
The downside is that it's a bit expensive.
Yamaha has an OEM set up Harness for power extraction and it's about $1,000.
I think it is reasonable to buy OEMHarness considering the work time.
View detail
For the production of the Connector for the Blinker relay of Honda vehicles
Purchased to replace the Blinker relay on my '14 MC41 CBR250R with Other Brand Product's 3-poleICRelay.
OEMHarness's Relay attachment is a 110-inch 9-pole MaleConnector (Female in terms of terminals) So, FemaleConnector of this product (Male in terms of terminals) It fits perfectly in the
The mating is Exactly and the terminals go into each other properly, so I think the quality is Large strange good.
In case you're interested, here's a picture of Wiring when using 3-poleRelay with MC41.
I'm grateful for the Large variant, even if it's a little more expensive to sell one at a time with these ConnectorSingle Body.
Electric Works Pliers are required for installation.
View detail
DAYTONA BLINKER CONNEKTOR
I bought myself a used Suzuki GSF 600S Bandit motorcycle. After the purchase, after some time, the direction indicator stopped working. After diagnostics, it turned out that someone had torn out the connector on the right turn indicator. I had to order a new connector from Daytona. This is a great connector. It installs quickly and easily. It looks like the original one. I recommend this product. View detail
For H4 conversion of Yamaha old car.
I think it's a very standard H4 Connector.
I think it's a must-have, especially for Yamaha's old car riders, because it's something that will be H4 standardized.
I have purchased 2 of them.
The video is a driving movie converted from Projector to H4.
View detail