Reviews
It is good for separate-handle-izing of SR.
It is good for separate-handle-izing of SR. View detail
Fits: HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50
KITACO Short lever and Quantity:I could use it in Set.
Used when CUB90 was converted to Manual at one time.
I did not like the lever of DAYTONA, so I used KITACO short lever. I was able to pull it.
There was nothing special about it, but it didn't work very well with KITACO's Lever.
The Thailandco part will twist as you use it.
Since KITACO's short lever does not attach Refreshingly even with the company's wire, fitting is not a good idea.
It's similar to …
Oh, by the way, I have a lever that fits this, but the pull force is almost the same as KITACO's short lever?
I think it's rather weak, and I wish DAYTONA had a short lever option.
View detail
Fits: HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50
It's not a bad idea
I purchased the APE Wire for Replacement at Damage I am satisfied because it is cheaper than other products and the replacement was done immediately I think this product is good if I change it again next time View detail
Required for Separate handle
If SR 400 is set to Separate handle, the usual Clutch Wire will be much more likely to interfere and it also interferes with the Front fender, which in some cases also becomes a scratch
This product is inexpensive and almost Refreshing looks almost the same as OEM after installation
Operability also does not change
I should have bought it sooner ...
As a matter of course, Wire grease application is necessary for installation
View detail
It was a good product
I purchased it by replacing from OEMCable.
Clutch is heavy in SR 400, but there are examples improved from ShortCable from Motorcycle store!
I expected, but it did not get lighter (Lol)
There is a mechanism that can adjust Cable at hand, and this is convenient for Large change.
Cable exchange - Lever exchange - Clutch exchange, in any case, adjusting the clutch's condition of favorite while running the test.
It is very troublesome to adjust Lever each time.
This is Large and Funny Convenience! Recommendation Item.
View detail
Used for SR of Separate handle
I bought the same thing because the wire has run out at SR 400 of Separate handle. Price is also cheap and quality is also very good so you can recommend it. We recommend replacing when making Separate handle. View detail
To exchange Clutch Wire
SR 400 's Clutch Wire has run out, so I decided to buy and exchange this item
Separate handleSpec. As it is normal, it is long and I attached the Short Clutch Cable
The installation was also very easy and Wire grease was also kept in mind so I was satisfied that Clutch could be disconnected to Smooth from before exchanging
View detail
The Separate handle was used, it managed and came out and the Throttle cable and the Brakes cable were dealing with the Clutch cable, although the Short was used.they were bad, assorted with other things, came out, ranked next, and , however t
The Separate handle was used, it managed and came out and the Throttle cable and the
Brakes cable were dealing with the
Clutch cable, although the Short was used.they were bad, assorted with other things, came out, ranked next, and
, however the interference and appearance to the Engine were alike, and purchased.
Although it does not change, the die length of the attached comment is [ a feeling of operation ] a Just fit! It is beautiful.I should have bought it early [
].
View detail
Fits: HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50
[webike Monitor] Since attachment was impossible unless it exchanged Clutch levers when set Switch was attached, but it uses the Wire here, it purchased. Since attachment it is [ attachment ] help that whose price is not high to t
[webike Monitor] Since attachment was impossible unless it exchanged Clutch levers when
set Switch was attached, but it uses the Wire here, it purchased.
Since
attachment it is [ attachment ] help that whose
price is not high to there (smile) should just make it only crawl on the same place as the Clutch wire of a NORMAL, it is easy.
Since the Boots is attached at the place where the Wire by the side of a Clutch is unreserved, the place different from the
NORMAL is a point with sufficient a Garbage and water being difficult to adhere to a wire body.
Although it may be after [
] fancy, I feel that clutch operation became heavy.
(Cause ? of adjustment)
View detail
Although there is not necessarily something specially, since it is too long, at 90 cm of STD, it is felt refreshed in case of a Separate handle.
Although there is not necessarily something specially, since it is too long, at 90 cm of STD, it is felt refreshed in case of a Separate handle. View detail
Since it shifted to the Separate handle from the Bar handle, this Clutch cable of a 10-cm Short was chosen with the Accelerator cable. It is satisfactory at all after a 1000-km run. Since there is also an Adjuster which adjusts die length as i
Since it shifted to the Separate handle from the Bar handle, this Clutch cable of a 10-cm Short was chosen with the Accelerator cable.
It is satisfactory at all after a
1000-km run.
Since there is also an Adjuster which adjusts die length as it is in the middle of the bottom picture of
, I think that flexibility is high.
Incidentally the rubber boot of the place of an Adjuster is not attached.
View detail
Its a clutch cable, not much to say about them. You'll find a new clutch cable is a dramatic improvement over an old worn one. It almost feels like I'm using a hydraulic clutch!
Its a clutch cable, not much to say about them. You'll find a new clutch cable is a dramatic improvement over an old worn one. It almost feels like I'm using a hydraulic clutch! View detail
In the short cable for SR400, since this product was the cheapest, it purchased. The direction which is looking for the short cable for SR thinks whether this is the safest.
In the short cable for SR400, since this product was the cheapest, it purchased.
The direction which is looking for the short cable for SR thinks whether this is the safest.
View detail
He thinks that he will exchange since a motion of the short clutch cable of the daytona attached before is becoming astringent, and it purchases the goods. Since it was separate handle specification, the short cable was looked for, but the cable of a
He thinks that he will exchange since a motion of the short clutch cable of the daytona attached before is becoming astringent, and it purchases the goods.
Since it was separate handle specification, the short cable was looked for, but the cable of a daytona is the most reasonable.
It is consumable goods, and some were purchased, and he thought that he would have as a stock and it purchased.
A motion is smooth.
If a separate handle is used, a motion of a clutch tends to become hard, but it is also dissolution when using a short cable!
View detail