Reviews
Wouldn't this be the perfect maintenanceSTAND for Middle motorcycle!
I am satisfied with the stability of the vehicle when using the rear stand, the lightness when lifting up, and the price. I was thinking of replacing the tires by myself in the future, and I am also hoping to expand the range of maintenance of other parts. (The Z650RS weighs 188kg *Rear Carrier would be better) It only requires a little weight by hand. It is very convenient because I used to do one side lift up with a piece of wood.
Comparisons were made with Company S, Company A, and Company J. As a result, we decided on DAYTONA. As the reason for the selection, I considered that the structure of the most load-bearing part is Square Type, which seems to be sturdy, and that it is superior in terms of comparative cost. Also, the fact that the product introduction image is of RS was a deciding factor. The other 3 companies are all sold separately, and S and A are a little cheaper than DAYTONA, but there were some comments that the stability of the frame is not so good. I have not actually used them, so I am not sure.
The Stand Hook holder is specified to have a diameter of 14 to 18mm. If the diameter is larger than this, it will not fit in the attachment. Also, it takes a little getting used to inserting the Attachment.
The only drawback is that the latch of the U-shaped attachment is too thin and I am not sure if it is durable. I am not sure if it is durable or not. I don't know because I haven't used it yet. However, spare parts are available, so there is no need to worry. (This is not a problem for those who can weld.)
J company claimed that the handlebar should be set to "Left" and "Up" when the brake is "STAND-UP", while DAYTONA company claimed that the handlebar should be set to "Straight". I am not sure of the difference, but I found that the fixation of the hook of the front brake at the time of OthersLift up was the same in all companies. I hope this is of some help.
View detail
Easy to use
I purchased this for Chain Maintenance and recommend it for vehicles without a Center Stand. View detail
Great tool with adjustable height.
Used on 2023 Honda Rebel 1100 - The quality of itself is metal pretty sturdy, very easy to assemble, I know some tools out there require to modify the jack to fit Rebel 1100 but this one needs none, the only thing you’ll need it turn both screws knob face front when you assemble it, if it’s on the wrong direction it’ll short about 1” to capture the frame. Overall is a great tool and affordable weigh nice color. The only thing O suggest buyer should consider bulk other order and combine shipping with other products with it, because this set alone with shipping it cost almost double. View detail
Fits: HONDA Rebel1100, HONDA Rebel500, HONDA Rebel250
It's tough to go it alone.
If two people do it together, there is plenty of room, but alone it is quite scary.
If you have a Rear Carrier with Grab Bar, you may be able to do it by yourself, but it is very difficult because the REBEL is low and there is no part to grab on the Rear side.
I did it with two people at first to make sure I could do it, and then I tried it alone, but I almost beat him.
I think it would be wrong to object to the fact that it cannot be done by one person, since the Manufacturer recommends a two-person operation in the first place.
Motorcycle maintenance is basically a one-person job, so I felt like Minus in that I had to get help every time!
View detail
Good stand!
It's a really good product. Both the finish and the design are excellent. Thank you for your prompt delivery. I recommend this product to others, too. View detail
Fits: SUZUKI V STROM 1050, SUZUKI V STROM 650
Lift up is easy
Purchased for maintenance and winter storage.
It is used with Hook with ZETA Spool installed.
I have considerably less strength than others, but I was still able to Lift up.
I couldn't stand on the car body Left Side, as it is generally called, and stand on my feet...,
I crouched down behind the vehicle and held the STAND with both hands and lifted it up a couple of times and it was stable,
Women and those who are not very strong can use it safely.
The initial setup is a bit cumbersome, but once it is set up, it is easy to use as is.
It will be quite useful for Oil replacement and ChainMaintenance.
View detail
If it is Shinobu Sen, Limit
I use it in Shinobu Sen.
To go up, it will go up.
However, with the two Bolts that come with it, it seems scary.
I added one of my own and made it three.
After that, the Frame lock starts to work just before it goes all the way up and stops.
In this state, if you loosen the Brake slightly, it will raise completely.
But I think U-type Clamp is easy.
View detail
Questionable quality inspection of products
I received it ahead of schedule, but when I was setting it up for installation to fit my Motorcycle's size,
The Clamp's corner Pipe was not penetrating the ArmHolder's insertion hole (One Side).
I had no choice but to use a slotted screwdriver as a chisel to remove the BALI.
DAYTONA, please inspect your products carefully.
View detail
Fits: SUZUKI V STROM 1050, SUZUKI V STROM 650
It was above my imagination.
I use it on my Z900RS. L-Type Arm hangs behind the Swing Arm for easy lift up.
If you are working alone, it is easier to work with a piece of wood under the Side Stand as it is close to parallel.
View detail
Fits: HONDA Rebel1100, HONDA Rebel500, HONDA Rebel250
DAYTONA AdjustableSTAND
I use it for REBEL 1100, but I feel uneasy when using Single Body because of its heavy body.:Once the Set is complete there is no problem. I am currently using it with STAND in the Front tire lock. View detail
Fits: SUZUKI V STROM 1050, SUZUKI V STROM 650
Some parts are pricey, but no problem.
Chain and Wheel cleaning was inconvenient and price.
Buy this one which is Reasonable.
Assembly is required, but the height can be adjusted without any problem. The Hook and the Adapter for direct use of the Swing Arm are included from the start. I purchased a ZETA Swingarm Spool at the same time and used the Hook for its stability.
When using the STAND, hang the vehicle straight with the front brake applied →STAND on the Hook →STAND rearward tip down, and you are done.
Note that there is no Cover on the Hook, so I made a mistake at first and damaged the Swing Arm as much as I could….
There is no wobble, and the feel is satisfactory. Above all, I am satisfied with the maintenance performance of the Large width up.
View detail
Fits: HONDA Rebel1100, HONDA Rebel500, HONDA Rebel250
Just right for REBEL 250
I used it on my REBEL 250. It was very useful for my daughter, who just got her license, to practice clutch and gear changing, and for maintenance afterwards. View detail
Fits: SUZUKI V STROM 1050, SUZUKI V STROM 650
With a sense of security.
A cheap Chinese-made product can be bought for about $2,500, but the Motorcycle you are lifting is over $2,000,000.
This is not a place to be stingy.
It's a small price to pay considering the cost of hundreds of thousands of parts when they fall down.
However, the U-shaped Hook fails because there is no Coating and it is in the Swing Arm.
I put a scratch in it.
View detail
Fits: HONDA Rebel1100, HONDA Rebel500, HONDA Rebel250
DAYTONA
I'd like to see it built a little sturdier. View detail
Fits: HONDA Rebel1100, HONDA Rebel500, HONDA Rebel250
Not suitable for REBEL 1100
Instruction Manual is unfriendly and difficult to understand.
The receiver is not stable due to rubber.
Not suitable for heavy motorcycles.
I almost knocked it over.
View detail
Fits: HONDA Rebel1100, HONDA Rebel500, HONDA Rebel250
8BK-MC49 has no problem
How was your experience with it?
Exclusive Design is indeed solid!
[Points to note]
Not particularly.
How did it compare to other products?
Price and [Contents] I thought this would be the best, considering the
View detail
Fits: HONDA Rebel1100, HONDA Rebel500, HONDA Rebel250
It was certainly ideal for Rebel.
I have been looking for a rear stand to perform chain maintenance on the REBEL for a long time, but I could not find a suitable one because the swing arm is a round pipe, the shape of the holder does not fit, or it interferes with the exhaust system.
This Rear Stand is claimed to be the best for REBEL, and the shape of the Arm Holder is suitable for REBEL's round Pipe Swing Arm, so it can be supported firmly. My REBEL has been replaced with MORIWAKI's Exhaust System, and there is no interference. (Although it says "suitable for REBEL", it does not mean that only REBEL can be used.)
Just take it out of the packaging and adjust the height of the ArmHolder to use it to the 4th or 5th step for the Rebel 250. (1100 says 2nd to 3rd level. 500 is not mentioned in the Instruction Manual but probably the same as 250)
With the front brake lever locked, the rear stand can be easily and safely lifted by inserting the rear stand into the swing arm and giving it a quick pull. When lowering it, you can do it the other way around by slowly raising the stand. (The price is reasonable and the quality is good.
View detail
A good helper for storing motorcycles
I bought this DAYTONA Adjustable Mini lifting frame from webike. It is smaller and more delicate than other lifting frames. This lifting frame is mainly used for storing motorcycles and cleaning chains in winter. It has a pulley to move Very convenient, the bracket can also be adjusted in multiple sizes to suit various types of motorcycles. -------------------------------------------------- -------- I bought this Daytona Adjustable Mini starting frame I bought at Webike. It has a small and delicate shape than other racks. I mainly use this frame to store motorcycles and cleaning chains in winter. It is very convenient , and the bracket can also adjust the motorcycle that is suitable for various types. Powered by Google Translator View detail