Reviews
Fits: HONDA Rebel1100, HONDA Rebel500, HONDA Rebel250
Easy to use
I purchased the Round Type because my ST250 has a circular swing arm. I am satisfied with it and can use it without any problem. View detail
Ideas products for improved serviceability!
I saw this product in DAYTONANews and bought it as soon as it went on sale.
I had a chance to do maintenance of CRF and SEROW's LINK circumference with just the right timing and used it immediately.
This tool is very easy to work with when pulling out and inserting the Axle Shaft and using it to assist in removing and installing the Wheel, as well as when slightly changing the angle of the Swing Arm for maintenance of the LINK circumference and adjusting it to a position where no excessive weight is placed on the LINK circumference.
When the Hook is hooked and pulled forward, the height of the Wheel is raised to just the right position, and the load can be set to Free, making it very easy to work with the Bolt around the LINK.
It is good to have one if you have many opportunities to service the rear wheel area.
View detail
Fits: HONDA CB1300SF, Others Only available for vehicles with Quantity:2pc under frame.
For stabilizing the vehicle body during operation
When working by suspending the car body with j-trip's Suspended Frame Stand, etc.
Purchased to stabilize the vehicle
Not originally intended for use, but safe to have
View detail
ChainMaintenance
For ChainMaintenance and Wheel Polishing
Very helpful.
View detail
convenient if available
Rear tires can be rotated by using a center stand or maintenance stand, but front tires are always maintained by moving the motorcycle back and forth. I have always had to move the motorcycle back and forth to maintain the front tires. This product will probably make it easier. View detail
ChainMaintenance
ChainMaintenance can now be done with ease. View detail
Fits: HONDA CB1300SF, Others Only available for vehicles with Quantity:2pc under frame.
STAND for liter machine with excellent cost performance
It's like a CB1300SF exclusive.
Since it is a collective pipe, there is no Center Stand.
It is very useful.
View detail
Fits: HONDA CB1300SF, Others Only available for vehicles with Quantity:2pc under frame.
It is like for CB1300SF to begin with.
It is a 1300 Sioux Four without a Center Stand because of the assembly pipe. I was worried about maintenance because it is very heavy and there are many stories about it falling down and breaking a bone. I have heard many stories about people breaking their bones when they fall over because they are so heavy, so I have been concerned about this for a long time. I would like to use Large stand. View detail
Fits: HONDA Rebel1100, HONDA Rebel500, HONDA Rebel250
ChainMaintenance and cleaning of rear wheel wheels
Purchased for ChainMaintenance and rear wheel wheel cleaning.
Use the Front Brake Lock to keep the front and rear from moving back and forth.
Easy Lift Up Stand Round Type for rear wheels
Raise the Swing Arm of REBEL1100 is Round Type because it is round.
Otherwise, it won't hook up well.
The rest is done by turning round and round by hand.
When using the product, please do so on a flat surface.
View detail
Very useful.
I bought this for maintenance because my spoke wheel came loose before and almost caused an accident. It is very convenient. It is also useful for washing the car. View detail
Expected
Used in ZX-6R.
Used in conjunction with the Brake Lock, the RearThailand or can be turned round and round. It can also be turned with one hand.
Chain cleaning and other tasks have been made easier.
View detail
Daytona
In terms of quality and texture is very suitable
About good using experience
About the beautiful design
About the size chart
The price is not too expensive compared to other products
About shipping and packing well
Any advice or notes when buying ------------------------------------------ ----------------- The quality and structure are very suitable About good use experience About beautiful design design About the medium size measurement table The price and compared to other products is not very expensive About transportation and packaging carefully All advice or note when buying Powered by Google Translator
View detail
Wheel and chain cleaning is easy
I purchased this product to clean Wheel and Chain.
I used to use a maintenance stand, but I had a hard time to wash them by myself every time.
It is also convenient that the width of the roller can be adjusted for each car model.
View detail
Rolling may be a little heavy.
ChainMaintenance has become much easier.
I also have a Maintenance Stand, but this is sufficient unless it is a large job.
View detail
Enough for chain cleaning/adjustment and rear wheel washing.
This type of roller stand has been around for a long time, but the weight is a little heavy and the rubber cushion on the back of the stand is
They were all peeled off with a single blow.
The body of the DAYTONA model is light and the position of the rollers can be easily changed according to the engine displacement volume of the motorcycle.
You can use from Mini bike to Liter machine.
I used to have a J-TRIP Stand for Beginner, but it took up a lot of space when not in use.
It gets progressively more difficult to clean up.
It's easy to store and it doesn't take up much space if you lay it down after use.
For example, when you put the rear wheel on the roller stand, you should put it slightly left of the center.
Let's aim at it and put it on at once.
After installing the front brake lever, tie the front brake lever with rubber or anything else to lock it.
When you turn the rear tire, the tire will shift to the right, so it is better to put the tire on the left.
I think it's easy to work with.
View detail
Easier to use than I thought.
I bought this for ChainMaintenance on my VTR250.
Maybe it's because the car is on the lighter side, but I didn't have to put that much effort into turning the Tire to get it to turn.
Body is the weight that can be held with one hand, and it is the impression that it is possible to put in and out easily because the place where it puts it is not troubled that much.
When you adjust the width of the Roller and Roller, you can remove it by pushing in the protruding part of the Roller, but I was able to remove it easily without putting any effort.
I worked with it on a flat Concrete and it didn't shift position.
To be honest, I didn't expect so much before using it, but it was more convenient and easy to handle than I expected. But if you have a large or heavy motorcycle, it may not be as stable as you expect.
View detail
MaintenanceRoller
I was looking for a rear stand.
It's been working great for me.
View detail
Very easy to use
Purchased for ChainMaintenance and cleaning around the wheels Chain cleaning and lubrication, which used to be done while pushing and pulling the motorcycle, is now much easier Tire rotation needs a little bit of power, but it's lighter than I expected, so it's not too much of a problem There is no problem as a practical use However, because of the horizontal gapping as it rotates, you can turn the Tire in the direction of rotation Quantity:Pair (for Left and Right) It's better to ride on either side of it, and the Body texture is very good It's not hard to find a place to put it like the MotorcycleLift, so it's only a simple task Then I think this is good enough for you View detail
Easy to use
I used it on my Kawasaki 750
I used it to clean the Wheel after Touring, but I didn't have to lift up the body of the car
It's easy to put on the Roller and rotate the Wheel
I wish I had bought it sooner
View detail
The quality is good and it's a good value for money
I purchased this for rear tire maintenance At first I was considering using a STAND type, but I felt it was a little inconvenient to use it in my parking lot I was looking for something a little more compact and found this product
I checked the actual product when it arrived, but there was no rattling, no unevenness in color, and the rotation of the Roller was also It was Smooth And I used it for maintenance Because of the slope, it needs a little momentum Moreover, because the tire is grounded to the Roller, it needs a little force only at the beginning of the turn of the tire But once it started working, I was able to turn it with more ease than I expected I think this is a good enough price for maintenance work for beginners
View detail