Reviews
Φ7 but Scauper thin
I bought a battered 900SS (900SL) and am Restore.
The engine of bimota db2 (DUCATI 900SSE engine installed) was transplanted to 900SS which is being restored, and since I took this opportunity … I also replaced the plug cord.
The old Plug cord was a 30 year old OEM cord and was quite stiff, but there were no problems and the fire burned beautifully the whole time.
However, it is old and the core wire is a single wire (!).
A line nearly 1mm thick is a Quantity:I changed to this code for fear of disconnection since it is only 1 pc.
This one has a double core wire and seems to be resistant to bending.
The surface of the cord is not Silicon, etc., but the old-fashioned Vinyl coating.
The color is simply Black, and since it is a Type Black color without Luster, it looks like an OEM code itself.
It's a loud color and how it looks. I changed it!" It is EXACTLY for those who do not like to
It is not soft like Silicon cord, but hard like OEM cord, so if you are not told, you will not be able to distinguish it from OEM.
The thickness is Φ7, which is a normal size that is common in other companies, but Silicon cord is often Φ8, so it is a bit thinner than it looks.
In addition, it seems to be very slightly thinner than the Φ7 code of other companies (within the error level measured by Caliper, so it is really just a feeling).
I am using AS Uotani's ignition coil, but the hole in the WaterproofRubber cap that covers this Connector is too narrow, so it is difficult to pass the cord through if I use another company's cord.
Of course, this cord doesn't go through smoothly either, but it still seems to be a little easier to pass...
So it would be easy to use for those who are changing to Dayna or Utani.
View detail
DAYTONA Plug Cable not bad at all
I bought a one meter long cable because the two meter long cable was out of stock at the time I bought it. However the one meter long cable is sufficient for my needs .the prices are much lower but the quality is the same as the OEM plug cable. DAYTONA Plug Cable not bad at all cause quality is excellent and very good indeed. I highly recommended.The price was very low so I bought it without thinking twice. It is definitely worth the money. You won't find spare parts for less than these prices anywhere else. Webike shop is the only place where you can easily and confidently deal with the lowest prices. I would say very authentic online shop.I'm giving 5star .Need to remind WEBIKE packaging and fast service. webike packaging is awesome and no need to worry about it .Overall ,TOPNOTCH service .Much Appreciated. Thank You webike !! View detail
Cheap and easy to use
old car (SportsCUB) Used to update a Cable that has become Pushing Kochi in Restore of
It is a very common Cable.
It also fits well with the objective of pure Restore since the appearance does not change after replacement.
We were able to successfully renew it.
View detail
I think it is sufficient.
I have an impression that it is a general plug cord. If you are not concerned about the color, I think this is sufficient for you. View detail
OEM same etc.
Used for BALIUS2.
I bought this Motorcycle because the price of the Plug cord and Coil is quite Gold for 4 cylinders in one unit.
I was able to purchase one and install it for 4 cylinders.
It does not feel particularly poor to the touch, but Cut was easy.
The yellow-colored tape in the photo is an OEM Product.
View detail
Softer than OEM
It is softer than OEM so it is easy to handle. I put Nitrile Bond on the coil side. Durability is still to be seen. View detail
Standard Cable
Because blue rust had come out to the Plug cord of BALIUS which was purchased by used, I purchased it as for Replacement. (´-ω-)
Although it is described as soft in other Impressions, it is a little firmer than the OEM Plug cord of BALIUS?s Plug cord, and even in a layman's sense, I have the impression that this level of hardness is necessary and sufficient.
I started it up after I installed it and it worked quite normally.
It is a normal, but reliable Manufacturer's Plug cord.
View detail
The product itself is very satisfying because it is priced right and has a NORMAL feel to it.
This time, I'm going to use Votani Coil.
You have to peel off a thin layer of skin to put it on, but this was a bit of a challenge.
It wasn't made that way to begin with.
If it's Uotani, I remember that KIJIMA or something like that is easier to peel.
The outer diameter is 7mm, so no problem (and so is KIJIMA).
View detail
Was good (o^^o)
I received it as soon as I bought it (^-^)
Impression after having installed quickly. It is safe to have enough 2 M even with 4 cylinders enough to be enough! The remaining part can be used someday again.
As impressions, I did not say that the performance got better because I attached it, clearly became better when compared with the previous code. Of course it is natural to say that the code will be more than 20 years ago, but if you can ignite well, ride comfort is good (o^^o)
Afterwards if Coloring is unexpectedly Black, it will be White face stuff.
But overall it is a satisfying product!
View detail
Honda OEM Product same outer diameter 7 mm, performance also complained none
OEM ignition of Honda car As Coil diverted,
I bought it. At Nankai parts and Lyco Land
The sold Plug Cable has an outer diameter of 8 mm
And so on, trying to replace Cable itself
Since it does not get stuck with Ignite Coil,
It is necessary to peel off the film.
As a result, it seems like it is leaking during rainy weather
Because symptoms appeared, exchanged here with an external diameter of 7 mm
Did. I can not confirm the symptoms,
Performance to Plug cord of POSH which used before
I do not receive any inferior impression. This price is 1 m,
Is this enough for those who want to change Plug cord?
View detail