Reviews
Fits: HONDA NC750X, HONDA NC750X LD, HONDA NC750S, HONDA CB400F, YAMAHA XJ6S, YAMAHA XJ6F, YAMAHA XJ6F, HONDA Africa Twin650, HONDA VTR250, HONDA VT250SPADA, HONDA VFR400 PRO ARM, HONDA VT250 INTEGRA, HONDA VRX400R100 ROADSTER, HONDA Rebel500, HONDA Rebel250ABS, HONDA Rebel250, HONDA Rebel250 S Edition, HONDA Rebel1100, HONDA Rebel1100, HONDA NSR250SP
I bought the DaytonaRedPad because it works.
The NormalPad has a sizzling sensation, while the RedPad has a gut feeling instead of a thumping sensation. View detail
Tank was replaced and used.
Used for APE Tank replacement. [Color] It's not Clear, so it's OEM tone. View detail
Ideal for NAKED's Engine area!
As per the Title, it is ideal for cleaning around the Engine of Naked motorcycle!
I have been driving a GSX1400 motorcycle for 16 years. The front side of the engine is hard to clean because of the oil cooler, exhaust pipe, oil line, and oil filter, and I have half given up on cleaning it.
However, I didn't want to leave it like this, so I was looking for something better and found this.
I purchased this product expecting it to work as well as it looked, but it was even better than it looked!
The size is a little large and the core wire is hard, but that is good!
A 1400cc straight-4 Engine is wide, and being wide means that it takes a certain amount of force to shove Brush into it and scrub it.
LargeSize and hard core were exactly Exactly for my use.
Also, the core Wire is not very thick, so it will properly fit into the gap.
After washing the car using DAYTONA's Shampoo in combination with this, Engine has regained the beauty of its original black paint!
This is highly recommended for those who want to keep Naked motorcycle's Engine appearance beautiful!
View detail
Wouldn't this be the perfect maintenanceSTAND for Middle motorcycle!
I am satisfied with the stability of the vehicle when using the rear stand, the lightness when lifting up, and the price. I was thinking of replacing the tires by myself in the future, and I am also hoping to expand the range of maintenance of other parts. (The Z650RS weighs 188kg *Rear Carrier would be better) It only requires a little weight by hand. It is very convenient because I used to do one side lift up with a piece of wood.
Comparisons were made with Company S, Company A, and Company J. As a result, we decided on DAYTONA. As the reason for the selection, I considered that the structure of the most load-bearing part is Square Type, which seems to be sturdy, and that it is superior in terms of comparative cost. Also, the fact that the product introduction image is of RS was a deciding factor. The other 3 companies are all sold separately, and S and A are a little cheaper than DAYTONA, but there were some comments that the stability of the frame is not so good. I have not actually used them, so I am not sure.
The Stand Hook holder is specified to have a diameter of 14 to 18mm. If the diameter is larger than this, it will not fit in the attachment. Also, it takes a little getting used to inserting the Attachment.
The only drawback is that the latch of the U-shaped attachment is too thin and I am not sure if it is durable. I am not sure if it is durable or not. I don't know because I haven't used it yet. However, spare parts are available, so there is no need to worry. (This is not a problem for those who can weld.)
J company claimed that the handlebar should be set to "Left" and "Up" when the brake is "STAND-UP", while DAYTONA company claimed that the handlebar should be set to "Straight". I am not sure of the difference, but I found that the fixation of the hook of the front brake at the time of OthersLift up was the same in all companies. I hope this is of some help.
View detail
It did not require much force to turn.
Used for YAMAHA's MT-07 (vehicle weight:184kg)
Adjust length to Swing Arm then Quantity:Set
I wondered if I would need to use a lot of force to turn the Tire when it finally lifts up. I actually tried it, thinking that it might take a lot of strength to lift the tire at the end, but it went up surprisingly easily. I think that even a woman with a small grip can turn it without a driver.
After lifting, even if lock nut is not used, it will not fall down, but it may be better to use lock nut to protect the threads.
Chain cleaning and wheel cleaning became very easy.
It is a cosmetic Tool.
It would be better to apply raspene or similar to the Screw pile when finished using it.
View detail
Fits: Others , KAWASAKI ZZR1400, KAWASAKI ZZR1400, KAWASAKI ZX-6R, KAWASAKI ZX-14R, KAWASAKI ZX-14R, KAWASAKI ZX-14R, KAWASAKI Z1000, KAWASAKI 1400GTR, KAWASAKI 1400GTR, KAWASAKI ZZR1400, KAWASAKI ZX-6R, KAWASAKI ZX-6R, KAWASAKI ZX-14R, KAWASAKI ZX-14R, Others NISSIN Radial 4 Pot Caliper Compatible Pad, KAWASAKI ZZR1400, KAWASAKI 1400GTR, KAWASAKI 1400GTR, KAWASAKI Z1000
Front Brake Pads for zzr1400
If it was before, I would use it all the time and it is a Repeat. View detail
DAYTONAfor Repair
I bought this one because I cry when I drop it.
Used for thruxtonrs.
The oval-shaped swing arm has a shallow hook.
If this is not possible, use a Y-shape.
View detail
Fits: YAMAHA Majesty., YAMAHA Majesty 250SV, YAMAHA Majesty C, YAMAHA Serow 225WE, YAMAHA Bronco., YAMAHA YZF-R1, YAMAHA YZF-R6, YAMAHA TW200, YAMAHA XT250X, YAMAHA TW225, YAMAHA TRICKER, YAMAHA TRICKER S, YAMAHA SEROW, YAMAHA SEROW250S, YAMAHA RZ50, YAMAHA MAJESTYC, YAMAHA MAJESTY, YAMAHA MAJESTY 250SV, YAMAHA BRONCO, YAMAHA MAJESTY 250SV
Front and Rear are also replaced with the same brand.
I felt a chill when touring with Tandem touring, so I replaced the Rear with this pad from DAYTONA along with the Front.
Satisfied with both braking power and control. No complaints.
View detail
Combined with the company's Universal Radiator Hose, it is a savior for old car riders.
The pipe itself is not made of soft aluminum or brass, but a solid iron-like pipe. The pipe itself is not made of soft aluminum or brass, but of solid iron, so there is no deformation of the pipe due to tightening of the band, and it can be tightened firmly, so there is no leakage even if pressure is applied.
The ends of the pipe are also thickened to prevent the hose from falling out, so as long as the hose band is properly tightened, the hose will not fall out even if pressure is applied.
View detail
Fits: KAWASAKI KX125, YAMAHA Serow 225WE, YAMAHA Cerro 225W, YAMAHA XT250X, YAMAHA TT250R, YAMAHA TT250R Raid, YAMAHA TRICKER, YAMAHA TRICKER S, YAMAHA SEROW, YAMAHA SEROW250S, YAMAHA DT230 Lanza, YAMAHA DT200WR, SUZUKI Jebel 250XC, SUZUKI Jebel 250 GPS Ver., SUZUKI Jebel 250, SUZUKI TS200R, SUZUKI TS125R, SUZUKI RMX250 S, SUZUKI RMX250, SUZUKI DR250SHE
Slightly Mild than Red Pad?
I replaced Red Pad with this one.
The previous one locked easily when I stepped on it with a thump, but this one did not lock, perhaps because it is somewhat mild.
Since it is an OFF car, I don't think it would be easy to lock it, so this level of gain may be just right.
View detail
Fits: KAWASAKI KX125, YAMAHA Serow 225WE, YAMAHA Cerro 225W, YAMAHA XT250X, YAMAHA TT250R, YAMAHA TT250R Raid, YAMAHA TRICKER, YAMAHA TRICKER S, YAMAHA SEROW, YAMAHA SEROW250S, YAMAHA DT230 Lanza, YAMAHA DT200WR, SUZUKI Jebel 250XC, SUZUKI Jebel 250 GPS Ver., SUZUKI Jebel 250, SUZUKI TS200R, SUZUKI TS125R, SUZUKI RMX250 S, SUZUKI RMX250, SUZUKI DR250SHE
I've only driven about 100km ….
I replaced Red Pad with this one.
I drove about 100 km for now and it works normally.
No wonder.
This may be more suitable than Red Pad, which is more aggressive because it is an off-road vehicle.
The only thing that I thought was different from the Red Pad was that it locked easily when you stepped on it with a thud, but I don't think it did that….
It may be a Large cutoff to lock, but I'm afraid to lock it so easily, so maybe this is as good as it gets.
View detail
Fits: HONDA NM4-02, HONDA NC750X, HONDA NC750X, HONDA NM4-01, HONDA NC750X LD, HONDA NC700X LD, HONDA NC700X, HONDA NC750S, HONDA GB350, HONDA INTEGRA S, HONDA INTEGRA, HONDA JADE, HONDA NC700S, HONDA GB350 S, HONDA GB250, HONDA CL400, HONDA CBR250RRR, HONDA CBR250RRR, HONDA CBR300R, HONDA CBR400R
Reliable DAYTONARed Pad
I have been using Red Pad for generations for my city riding and Touring Main Machine, so I didn't feel any particular anxiety.
It seems that the previous owner had DaytonaGolden in his car, and even with the same grip, the Golden felt like it stopped with a final jerk, but the Red Pad feels like it stops naturally with the same deceleration ratio until the end when it stops smoothly, so I prefer the Red Pad for control.
This is a balance of Tire performance, disc, front fork and rider's weight, so please take this as a personal opinion.
View detail
Fits: KAWASAKI KR-1, KAWASAKI ZXR250 R, KAWASAKI GPZ400R, SUZUKI RGV250 gamma, KAWASAKI ZXR250 R, KAWASAKI ZXR250, SUZUKI RGV250 Gamma-SP, SUZUKI RGV250 Gamma-SPII, SUZUKI RGV-Gamma 250SP, KAWASAKI Zephyr 400, KAWASAKI Australia, New Zealand and the United States, KAWASAKI ZXR250, KAWASAKI ZX-4, KAWASAKI KR-1S, KAWASAKI KR-1R, KAWASAKI GPX250R-2, KAWASAKI GPX400R, KAWASAKI GPX250R, SUZUKI RGVRG250 -SP, SUZUKI RGVRG250 -SP II
This is good. No, this is good.
[How is it used?
SEA BASSRGV250Γ (VJ22A) I purchased this product as a for Rear of
I usually use it for touring and it was about time to replace it, so I replaced it for the full-fledged start of the touring season.
How was your experience with it?
I found out at the time of exchange that the previous owner was also using a Red Pad, so the exchange was for the same product.
Gamma's Rear is very easy to replace because the entire caliper can be removed from the Support without even removing the Tire.
Naturally, the Brake works the same, etc., and there is nothing special to mention, but I am satisfied because I was not dissatisfied at all from the beginning.
The braking force is sufficient for the Rear Brake Disc Rotor, and we want to reduce the wear of the Rear Brake Disc Rotor as much as possible, so we think this is the most appropriate choice.
I like the fact that the packaging is designed to prevent the pads from hitting each other.
How did it compare to other products?
Decent may be a misnomer, but DAYTONA was the only decent manufacturer that had a lineup of VJ22A for Rear.
I chose Semi Metal's Red Pad almost exclusively for touring use, because I am a 2-stroke driver, and I am very careful with Brake.
[Points to note]
Naturally, since this is only PadBody, you should also prepare Grease and, if necessary, Brake fluid.
【Review】
It is such a standard Pad that it is almost the only choice for Gamma for Rear.
And yet it is relatively Wallet-friendly, so I wouldn't even consider anything else in my mind.
View detail
Daytona spool nut
Fits perfectly! View detail
Fits: HONDA Magna 750, YAMAHA Majesty S, YAMAHA Majesty 125, YAMAHA Cygnus X, YAMAHA Cygnus X125SR FI, YAMAHA Cygnus X125SR FI, YAMAHA MT-01, HONDA valkyrie, HONDA Valkyrie Tourer, SUZUKI DL250 V-STROM250, SUZUKI GSF750, SUZUKI GSR250, SUZUKI GSR250F, SUZUKI GSR250S, SUZUKI GSX250R, SUZUKI RF400R, SUZUKI RF400RV, SUZUKI Impulse 400, SUZUKI Impulse 400 Type S, SUZUKI Gemma.
Balance between cosmetics and seminal vesicles
The cost performance is good for the braking power, as there is little reduction in braking power. View detail
Fits: KAWASAKI ER-4n, SUZUKI SFV650, SUZUKI SFV650, SUZUKI GSR750, SUZUKI DL650 V-STROM XT, SUZUKI VANVAN200, SUZUKI DESPELADO800, SUZUKI DESPELADO800 X, SUZUKI DESPELADO400, SUZUKI DESPELADO400 X, SUZUKI GLADIUS650400ABS, SUZUKI Intruder Classic800, SUZUKI Intruder Classic400, SUZUKI XF650 FREEWIND, SUZUKI V-STROM1000, SUZUKI SV650, SUZUKI SV650, SUZUKI SV650 S, SUZUKI SV650 S, SUZUKI SV400S
Satisfied
I was worried about RedPad, but this time I bought GoldenPadX because it was cheaper!
The BrakeTouch is now better and very easy to drive.
I was concerned about the brake performance since it is a single disc, and after replacing the disc, I was able to solve the problem and get a very good price.
View detail
Fits: SUZUKI V-STROM1000, SUZUKI V-STROM1000 XT, KAWASAKI ZX-10R, KAWASAKI Ninja1000, SUZUKI V-STROM1050, SUZUKI GSX-R600, SUZUKI V-STROM1000 X, SUZUKI GSX1300R HAYABUSA, SUZUKI GSX-R750, SUZUKI GSX-R600, SUZUKI GSX-R1000, SUZUKI GSX-R1000, SUZUKI GSX-R1000, KAWASAKI ZX-10R, KAWASAKI ZX-10R, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI Z1000, KAWASAKI Z1000, KAWASAKI Z1000
As expected
The OEM system was not as effective as I had hoped. View detail
Fits: HONDA ZOOMER-X, HONDA PCX, HONDA PCX HYBRID, HONDA LEAD125, HONDA LEAD110, HONDA SUPER CUB110, HONDA SPACY125, HONDA SPACY100, HONDA GYRO CANOPY, HONDA CROSSCUB110, HONDA XL230, HONDA PCX150, HONDA PCX150, HONDA FTR・223D, HONDA DIO110, HONDA CB223S, HONDA XL230, HONDA CB223S, HONDA FTR・223D, HONDA PCX150
Is good
[How is it used?
I use it for commuting.
Was the one you received as per Image?
It was just like the image.
Was the installation difficult?
I don't think it's difficult, just tedious.
How was your experience with it?
I think it works well and has a long life.
[Included Parts:were they on?
It was attached.
[Was there anything that disappointed you?
I'm not sure Dust is the way to go.
View detail
Easy to use
Easier to use than expected. Can be turned by hand without using tools.
Since it is compact, I think it is good to take it with you when you are on an overnight touring trip. I used to have a hard time lubricating the chain, but this makes it easier. I wish I had bought it earlier.
View detail
Fits: HONDA CB1300SUPER BOLDOR, HONDA CB1300SUPER BOLDOR, HONDA CB1300SUPER BOLDOR, HONDA CB1300SUPER BOLDOR, HONDA CB1300SUPER BOLDOR, HONDA CB1300 SF, HONDA CB1300SUPER BOLDOR, HONDA CB1300 SF, HONDA CB1300 SF, HONDA CB1300 SF, HONDA CB1300 SF, HONDA CB1300 SF, HONDA CB1300 SF, HONDA CB1300 SF, HONDA CB1300 SF, HONDA CB1300 SF, HONDA CB1300 SF, HONDA CB1300 SF, HONDA CB1300SUPERTouring, HONDA CB1300SUPERTouring
No problem
I replaced the inner duct with a larger opening to increase power. The intake inner duct was also changed to a larger opening.
As a result, I feel that I can now accelerate smoothly.
However, we are not sure if this is due to the filter replacement or the inner duct process, and the change in acceleration may be a placebo effect to begin with.
For a while after the replacement, when I put the Axel back in, it was burbling (it went away quickly), so I think the intake efficiency must have changed in some way.
View detail