Reviews
To improve safety
Purchased to replace the Chest Protector on a DEGNER Leather Jacket.
We narrowed down our choices to a few products, and even though the shape looked good, there was no entry for dimensions, so we decided on this product made by DAYTONA, a Level 2 company with a shape and dimensions close to those of the other products.
After trying on the Protector, I found that the thickness of the Protector is double that of the Standard Equipment (about 16mm), so there is some pressure on the chest, but I believe that the safety has been improved.
The weight is One Side100g.
View detail
Merit to wear any jacket you like.
Motorcycle SuppliesManufacturer's Jackets are all dorky, so I bought one to wear with my favorite clothes.
I think you should choose 1 Size below your normal size because it stretches quite a bit.
The elbow pad does not fit just by putting it on, so the position needs to be adjusted each time it is put on.
It is well ventilated, if not cool, in the summer.
It is less reassuring than Solidly's Protector, but it is more secure than not wearing it.
Cosmetically, I felt it was a bit expensive.
View detail
I feel more secure.
The softness of this product allows it to be taken out and put in through a narrow entrance. Until now, the entrance was made of soft urethane that could be rounded up to a small size, and only a comfort pad could be put in. Moreover, it has CE Standard, which gives me more peace of mind.
I don't know about the protective nature of the rating, so I have given it no stars, which does not mean that it is bad.
View detail
Looking forward to summer!
I bought this for my summer commute.
I am looking forward to wearing it in Mesh, it is quite breathable.
I am now running wearing it under a thin Jacket.
The Protector is also very solid and secure.
View detail
Safety and Security
To cut as an inner, the M size is just right fit.
175cm,65kg
View detail
First time Inner protector
With one of these, you can use it all year round.
I used to wear Protector jackets, but they were tacky and I had to change them with the seasons, which was inconvenient.
Chest Protector is a little unreliable, which is a complaint
If you're worried about it, you can just change the chest area.
I wear a t-shirt on my chest in the summer anyway, so I don't think you can tell the difference from the outside, even if you use a different Protector.
170 cm, 62 kg, standard build.
View detail
I just wanted to put this on...
Taichi's jacket RSJ726 Monster All Season Parka has elbow and knee pads, but damage to the chest, as indicated by the number two mortality rate after the head, Chest protector However, I didn't like the weight of the separate model (TRV079 Lynx Separate Chest Protector), and I didn't like the hassle of attaching and detaching the integrated model (TRV063 TECCELL Chest Protector). I didn't like the weight of the TRV079 Lynx Separate Chest Protector (TRV079 Lynx Separate Chest Protector), and I didn't like the hassle of attaching and removing the integrated model (TRV063 TECCELL Chest Protector), and the split model (TRV067 TECCELL Separate Chest Protector) seemed the best.
While the above three products are CE StandardLevel2, this is a lower grade. Level 1 compliant So, although it may be less robust, I decided to try this Balance because the softer one will definitely be more comfortable in driving conditions anyway.
It is exactly the same as 3Snap buttonType in Thailand. Pushing at the time of impact and instant hardening! and Fit your body with instant hardening soft fit! I believe it is a good sense of balance, if you believe in that point!
View detail
DP-001 Cut-resistant Slim fitInner protector with
It is attached to the chest of the cut-resistant Slim fitInner protectorDP-001.
It is thin and soft, so there is little discomfort.
CE StandardLevel 1.
View detail
Cut-resistant Slim fitInner protectorDP-001
It is attached to the back of the cut-resistant Slim fitInner protectorDP-001.
It is thin and soft, so there is little discomfort.
CE StandardLevel2.
View detail
Cut-resistant Slim fitInner protectorDP-001
I use cut-resistant Slim fitInner protectorDP-001 attached to the shoulders and elbows.
It is thin and soft, so there is little discomfort.
CE StandardLevel2.
View detail
Thin and unobtrusive.
It is thin, flat, and unobtrusive at a glance, which is good.
I like it so much I want to put it on my other Pants.
The protective properties are unknown, as it has not been rubbed.
View detail
For spine protection
I was worried about the thickness of 13mm and bought 19mm, but I think it is a little too thick. Instead, the safety is so good that I can tell just by looking at it and touching it. 。 I installed it on my DAYTONA leather jacket, but I had to bend it drastically and push it in to get it on! I was able to install it with a shout of "Toria!" lol I will use it for a while and if it is too bulky, I will consider 13mm. View detail
Easy defensive power up
Product Features
Thin, CE1 with SAS-TEC elbow, shoulder, chest and back protectors, good breathability, cut resistant fabric, Mesh fabric
[Suitable person
People who want to ride with Inner and T-Shirt in summer, people who want to ride with Outer other than for Motorcycle in winter, people who ride with Wear without Protector, people who want to use Protector around.
[Effect]
The effectiveness of both Cut Resistant and Protector is unknown because there is no history of falls.
Size Sensation
I am 170cm, 65kg and M size JUST. If you are an inner wear that you never take off, you should go one size down. If you want to wear it on top of your regular innerwear when riding around town and take it off when you get off the bike, I think you should use your regular size.
The protector may be a little bulky after wearing the outer garment, so if your outer garment is a tight leather jacket, it may be too tight. If not, I think the Wear size is fine as it is.
[Not yet.
The lower part of Fastener belongs to Gold and there is no Cover.
Longer length. The back does not stick out, but when leaning forward, the fastener hits the tank, so it is necessary to put in pants.
View detail
Considerable comfort has been achieved since the last product Chest Protector
[How is it used?
The company's past products SAS-TEC Chest Protector CP-2 Body Only Item No.:94856 This is a Replace from
Was the one you received as per Image?
It was softer than I had imagined and flexible enough that even if I held it horizontally anywhere, it would not be level.
The Image is a shape-like SAS-TEC resin on a resistant fabric.
How was your experience with it?
The company's past products were thicker and a little stiffer, so when I put them in my Jacket and stretched my chest, I felt like a muscle breast plate ghost, and it was uncomfortable to hit my chest again. I am very happy with it.
And since they are thin, I am very happy that I don't have a muscle chest plate ghost.
[Points to note]
Although it is still a little uneasy at heart compared to the complete HardProtector, it is very comfortable considering the previous company's SAS-TEC as a standard. I am glad I bought it.
How did it compare to other products?
I don't know because I don't use other companies' products.
[Others]
I feel that the softness and fit are so comfortable that I would like to replace the SAS-TEC for Knee with the SAS-TEC for Shoulder and Elbow.
View detail
Size selection?
I am about 170cm tall and weigh 63kg, and I chose S. I tried on a pair at a supply store.
I used to wear Full Mesh for summer, but it was more comfortable.
I bought this Inner protector and other inexpensive Yutaka products.
I actually wear it to work (10-15 minutes) ? in my opinion.
When you wear it as you normally do, the pad at the elbow stops at the forearm and becomes stretched out, and then you hold the pad and adjust the position.
Nothing to worry about while Riding.
If you are considering purchasing this item, we recommend trying it on once as the arms are quite stretchy.
View detail
Cospar good
Purchased for my knees. Very soft and comfortable.
The defense is also CE1-rated, so you can rest assured that it is safe.
View detail
Satisfied
[How is it used? During the summer, when it is relatively close.
Was the one you received as per Image? Overall, the product is more solid than expected.
How was your experience with it? I thought it would be hotter, but it is surprisingly cool.
[Points to note] None in particular
How did it compare to other products? I wore it with a DryMaterial (cool feeling) Long T→ said product→ Short Sleeve T - shirt, but it is totally cooler than the Mesh jacket and can be worn casually. I think the strength of the Protector is not that great, so I would not wear it for long distances.
View detail
Purchase for tandem
I was looking for an upgrade to my existing elbow protector and purchased a small M size to use as a tandem chair. It's a shame that it moves a little every time you insert it into the elbow pocket of the jacket, but I'm satisfied with it because it seems stronger than the existing protector. -------------------------------------------------- -------- I wanted to upgrade the elbow protector, so I bought it in a small M size to use it for Tendemja. It is a pity that it will move little by time when you move into the elbow pocket of the jacket, but it is satisfactory because it looks stronger than the existing protector. Powered by Google Translator View detail
Looks effective.
Normally soft, hardens upon impact….
I tried it!
When I gouged it with something hard, it got hard!
The area is smaller than expected, but I believe that the acute areas are protected.
View detail
SizeExactly
I usually wear a LSize jacket and this product looks just as good.
I am 169cm.61kg.
View detail