Reviews
Almost a must-have product
[How is it used?
I use it every day.
Was the one you received as per Image?
Yes
Was the installation difficult?
I think anyone can do it with Hexagonal Wrench, so I think it's a level of difficulty that anyone can do.
How was your experience with it?
I would recommend this product to all Eliminator riders, as the OEM was difficult to use and some helmets could not even be applied.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
None
If you have taken delivery of an Eliminator, I think you should buy it first, it is inexpensive and easy to install.
View detail
I wanted it to be included from the beginning... Helmet holder
Easy to use and reasonably priced. It is a satisfactory product if you are not particular about the price! View detail
Fits: YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA MT-03, YAMAHA MT-25
It is easy to install.
The product is fine, but it can only be installed on the Left Side, and the position is a bit low. View detail
Alternatives to OEMHolder
The EliminatorOEMHolder was in the Seat and could not be used without removing it, so we installed this one.
The OEMBolt was unusually hard and it took a while to get it right, but I was generally satisfied.
View detail
Fits: HONDA 400X, HONDA CB500X, HONDA CBR500R, HONDA CBR400R (2013-)
Installed on a CBR400R 2024
Installed on a CBR400R 2024.
I was able to put it on with no problem.
View detail
There is a LARGE difference between "yes" and "no"!
Installation is easy.
The bracket is a little long, so it feels a little wobbly when you move it, but it's no problem to wear the helmet.
However, it is rather close to footpeg, so you may hit Helmet if you are not careful.
View detail
![[Helmet Holder Replacement Parts] Holder Body](https://img.webike-cdn.net/catalogue/images/41401/1_145759949779129800_m_6pk2b_TS.jpg)
Large Helmet holder with hooks
The helmet holder on the OEM motorcycle is small and difficult to use, so we purchased it.
The ENDURANCE:Endurance MultiCenterCarrier shown in the photo was installed because there was a place where it could be mounted.
The large hooks make it easy to attach a helmet.
View detail
Absolutely necessary!
It is a must-have product because Eliminator's OEM Product is not easy to use.
It is easy to install and very user-friendly.
View detail
Very convenient!
First of all, this product is per Large! It's a Dial type so you don't need a key! I didn't realize how convenient it would be to just use it…The texture of the switch when you press it is also great! The weight is reasonable and the build quality is good! Once you use it, you will never go back to the OEM Helmet lock which is hard to use! I will never go back to the OEM hard to use Helmet locks once I have used them! View detail
Installation of helmet holder on XSR125
We install most of Motorcycle's helmet holders on each vehicle we deliver.
As usual, it is useful for Helmet lock when parking the bike.
It is a vehicle specific product, but I had to shave it down a little to install it because it hits the side cowl a little.
View detail
It would be more convenient to have
There is one on the Body, but I bought it because it is inconvenient to use it without removing the Seat, and also because it is essential when I tandem the body.
I am satisfied, including the price.
View detail
Fits: YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA MT-03, YAMAHA MT-25
Easy to use
The vehicle I bought had a KIJIMA helmet lock, but I had trouble hooking the U-shaped hook from the side, so I didn't use it.
It is very easy to use because it is hooked from below.
View detail
Old-fashioned position
The CB1000R does have a helmet holder, but it is under the rear sets. SV650 has a helmet holder that can be placed between handlebar and tank, but CB1000R seems to fall off. I don't like it because it might scratch the tank or something. I bought a helmet holder which is attached to the Tandem Footpeg in the traditional position, and I am glad that it does not seem to damage both the motorcycle and the helmet, although it depends on the shape of the helmet. View detail
Easy installation.
I am new to Motorcycle (CL250) without a Helmet folder,
I realized that the Helmet folder was very important items for me,
During the break-in period, I purchased a fast-track.
The installation was so easy that it was not enough.
View detail
Convenient
It comes on quickly and simply by co-tightening with the OEMTool Box.
The standard wire for the Helmet holder on the CT110 HUNTER CUB is
I am glad I installed this one because it is not that good to look at.
View detail
Cl500
I purchased a wire-type helmet fixing lock. It can be fixed to the main body, and it doesn't seem to shake because it's at the rear. In reality, it's not that small. There are also two keys, one to use with a motorcycle key ring and one to keep at home for emergencies. I recommend it ------------------------------------------------ ---------- The helmet fixed lock was purchased as a wire type and could be fixed to the body, and it was unhappy because it was a rear side. I recommend it Powered by Google Translator View detail
Might have a little hang to Dial match.
The shape is Compact and I am satisfied with that.
However, the engagement of the lock seems to vary from person to person, and mine has a little gap, so I put tape over it to fill the gap.
I chose Dial type because it is troublesome to take out a key every time I use a keypad, but it is a little difficult to adjust the Dial in a dark place. According to the manual, if you turn the dial in the Countdown direction, the dial stops at Zero, and you can count again from that point.
(I have a Mini light on top of the Handlebar, so I use that to eyeball it)
View detail
Satisfied with the ease of use:??
I installed it on the center of PCX125 MININarrow handle. It is not so much assertive and casual feeling is good. On the other hand, the dial is a little bit small and difficult to turn, and the hooked part is also small, so I am a little afraid of dropping the helmet. View detail
It was just as comfortable as I expected it to be.
The OEM helmet holder was no longer available when the side bag was installed, so we installed it.
OEMHolder, if you pull out the key while Helmet is on, the bar will come off and Helmet will drop.
The structure was difficult to use, and it was difficult to use the Large change.
This product will hold the Hook even if the key is removed with the Helmet applied, so the Helmet will not fall.
It is usually easy to use.
The drawback is that it requires one more key, but this is the same for all retrofit products, so we have to discount it.
View detail
Easy to use
Tandem Footpeg and co-tightening
Although from a working point of view, the Hexagonal Wrench is sufficient,
Since the front side is difficult to turn due to the swing arm and rear damper, it is more efficient to use a ratchet wrench.
On CBR400R, it was unstable without Tandem Footpeg in Helmet,
Visor could be scratched.
In the CBR650R, Helmet will be riding on a Tandem Footpeg,
It is stable and easy to use.
Required tool
Hexagonal Wrench 8mm
View detail