Reviews
Batch!
Was the ELIMINATOR 400 Bracket prepared for the purpose of attaching this? It fits so perfectly that you may wonder if you prepared the Bracket to put it on.
BoltQuantity is also installed by removing the Side Panel.:Easy installation by simply fastening with 2pcs.
It is also nice to use, so I think it is a good product to install. (,,> <,,)
However, if the Key is Quantity:It's going to be 2 pc...
(OEM keys and keys specific to this product)
Well, that's the same with other cars, so it can't be helped lol.
View detail
Almost a must-have product
[How is it used?
I use it every day.
Was the one you received as per Image?
Yes
Was the installation difficult?
I think anyone can do it with Hexagonal Wrench, so I think it's a level of difficulty that anyone can do.
How was your experience with it?
I would recommend this product to all Eliminator riders, as the OEM was difficult to use and some helmets could not even be applied.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
None
If you have taken delivery of an Eliminator, I think you should buy it first, it is inexpensive and easy to install.
View detail
I wanted it to be included from the beginning... Helmet holder
Easy to use and reasonably priced. It is a satisfactory product if you are not particular about the price! View detail
DAYTONA Re-Helmet
It is easy to use because it has a strong airflow and a timer. View detail
Fits: YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA MT-03, YAMAHA MT-25
It is easy to install.
The product is fine, but it can only be installed on the Left Side, and the position is a bit low. View detail
DAYTONA Re-Helmet
I bought this for use after touring. I used to use a Plasma Raster, but the airflow is so much stronger than the Plasma Raster, so I am expecting a Large for use after touring in the middle of summer. View detail
Alternatives to OEMHolder
The EliminatorOEMHolder was in the Seat and could not be used without removing it, so we installed this one.
The OEMBolt was unusually hard and it took a while to get it right, but I was generally satisfied.
View detail
Fits: HONDA 400X, HONDA CB500X, HONDA CBR500R, HONDA CBR400R (2013-)
Installed on a CBR400R 2024
Installed on a CBR400R 2024.
I was able to put it on with no problem.
View detail
There is a LARGE difference between "yes" and "no"!
Installation is easy.
The bracket is a little long, so it feels a little wobbly when you move it, but it's no problem to wear the helmet.
However, it is rather close to footpeg, so you may hit Helmet if you are not careful.
View detail
Large Helmet holder with hooks
The helmet holder on the OEM motorcycle is small and difficult to use, so we purchased it.
The ENDURANCE:Endurance MultiCenterCarrier shown in the photo was installed because there was a place where it could be mounted.
The large hooks make it easy to attach a helmet.
View detail
Maybe it's just my imagination, but it seems to work!
I have been using it for over a year now, and in that time, the inside of Helmet has never started to smell, so I think it works reasonably well.
I own 3 Helmets and use them differently, and I always deodorize each one with this after Riding. Two of them can be washed with the interior removed, but I have not washed them yet. (Don't tell me it's dirty.) Even so, there is no smell. I always put on the helmet after putting on the head cap, so it may be related to the fact that sweat does not penetrate directly into the helmet's interior.
The first, Jet helmet, was purchased with RedCUB 5 years ago and was used year round at first, but about 3 years ago I bought a half helmet for summer use and used it in fall and spring, and about 2 years ago I bought a System helmet for winter use and limited it to spring and fall use.
In other words, the interior washable Jet helmets are worn almost exclusively in the spring and fall when the weather is nice, so they do not sweat much, and the washable winter System helmets are worn almost exclusively when the temperature is cool, so they may not smell as much. Still, the non-washable half helmets are worn during the sweaty season, but they do not smell. This may be due to the fact that the wind does not blow in as much and the head cap keeps sweat out.
The top surface on which the helmet is placed is sloped toward the front, but I feel like the helmet might slide down. The vent is raised, so I don't think it will get caught and slide down...but it would be nice if it were a little gentler.
The body is Type C and comes with a Type A-C Cable.
I always use it at maximum air volume? 3 hours operation, but with a 10000mAh Mobile Battery, I can run it 3 times +/-, which is quite eco-friendly.
View detail
They come in handy
Even if it gets wet from sweat or rain, you can dry and deodorize it all together just by leaving it here.
It is likely to show its true value especially in the summer.
It is simple to make, but I feel it is effective.
It is good to have consumable Parts such as Filter so that it can be used all the time.
View detail
Absolutely necessary!
It is a must-have product because Eliminator's OEM Product is not easy to use.
It is easy to install and very user-friendly.
View detail
RE:MET
It is useful for drying wet helmets and gloves on rainy days.
Air volume control (low, medium, high) and Timer (1, 3, 6 hours) are convenient.
It is helpful because it dries a Large body overnight. (Used on high, 6 hours)
I think the deodorant is working because it doesn't smell bad. Maybe in the summer the effect will be a huddlerill?
View detail
Very convenient!
First of all, this product is per Large! It's a Dial type so you don't need a key! I didn't realize how convenient it would be to just use it…The texture of the switch when you press it is also great! The weight is reasonable and the build quality is good! Once you use it, you will never go back to the OEM Helmet lock which is hard to use! I will never go back to the OEM hard to use Helmet locks once I have used them! View detail
I had no intention of ever buying it.
I knew about the product, but until now I had no intention of buying it because I didn't think I'd have any use for it,
I borrowed them from an inn when I got wet in the rain during last year's Hokkaido Touring and they worked so well that I bought them.
Universal, as it can be used not only for helmets and gloves, but also for boots.
View detail
Installation of helmet holder on XSR125
We install most of Motorcycle's helmet holders on each vehicle we deliver.
As usual, it is useful for Helmet lock when parking the bike.
It is a vehicle specific product, but I had to shave it down a little to install it because it hits the side cowl a little.
View detail
characteristic (of someone)
No human being is odorless.
Anything that is in close contact with the body will have body odor attached to it.
I bought it to maintain hygiene.
I think it is necessary in summer because of the large amount of sweat and sebum.
View detail
Sweat sebum Prevention
I would prefer not to have my own smell, which has been stained over the years, not to say it is offensive.
I bought it because I am concerned about perspiration in the summer and sebum often in the winter, and I want to control the smell as much as possible.
View detail
It would be more convenient to have
There is one on the Body, but I bought it because it is inconvenient to use it without removing the Seat, and also because it is essential when I tandem the body.
I am satisfied, including the price.
View detail