Reviews
My family hates me.
It's a blower so it smells all over the front door and my family complained about it. It spreads a bad smell.
I thought it would be better if it was a suction type and the deodorant filter was made to pass. I think that the deodorant effect is not generated by Ion, but is just blown away by wind.
View detail
Not easy to use and reluctant to move.
Ease of installation is good.
Insert the key and press Quantity:Pair (for Left and Right) I do like the fact that the locking section moves 180 degrees in either direction.
The key is stuck in the lock while it is unlocked.
The key can not be removed until it is locked by hooking the D-ring of the helmet.
I feel like the Helmet is in the way when I lock it and it's hard to do.
Also, at first, the lock did not open on the Left Side. Also, the movement was not so good as it creaked.
When I lubed it with Silicon spray or something, the Left Side also opened up and moved better.
I bought a similar Helmet holder from another manufacturer, but the price was cheaper than the original.
I felt that the usability and quality of the product was not good enough. I felt that it was.
View detail
Required Items
I bought this because my CBR650R doesn't have the OEM Helmet holder.
Installation is as simple as removing the Bolt from the Tandem Footpeg, inserting it in between, and then reattaching it!
If you have a commercially available Torque wrench and Driver, you can install it at home in about 10 minutes.
Locking the Helmet is also very easy and effortless as all you have to do is hook it up and snap it on!
It's also located in a way that doesn't inhibit the look of the Motorcycle, so that's a nice Point as well.
The price is also quite normal, so I don't think you'll have any problems buying it.
View detail
Easy installation
Easy to install, works well. View detail
Fits: HONDA Rebel1100 DCT, HONDA Rebel1100 DCT, HONDA Rebel1100, HONDA Rebel1100
I made a Bar end mirror, so here it is.
Installation is Level, which anyone can do in about 5 minutes.
If you are not equipped with anything, there is no problem, but when you remove the Helmet, please be careful because sometimes it is caught in the Tandem Footpeg. In addition, I use a DEGNER NB100 Saddle Bag, but it interferes with the Helmet when equipped, making it difficult to operate the lock.
If you are using a Saddle Bag, we recommend that you have a Helmet holderAssist on hand.
Helmet is X14 by the way.
View detail
It's convenient
It's placed in such a way that it appears between the V-shaped Frame of the Tandem FootpegLeft Side of REBEL. How could you even think of putting it on during this time? It is a product that looks like an OEMOption.
I can use the Handlebar with the helmet hooked to it, and it doesn't seem to get caught on the back of my clothes while driving.
You will have more keys to manage, but if you keep them together via Carabiner on the OEM key, you can unlock them individually without stopping, even if you run Engine before Helmet lock is unlocked.
View detail
lock-essential
I bought it because I don't need a key, and it's super easy to install, but the numbers are a little hard for my old eyes to read (laughs). View detail
Easy Installation Single Item Quality Satisfaction
I bought this for my CT110 HUNTER CUB which has an unfriendly helmet holder.
Installation is very easy and takes only 5 minutes
Simply remove the OEM Tool Box, cotighten the Bracket, and secure the Holder.
Bolt3 will complete the story.
The quality of the product is good, and I don't feel any different when people say this is OEM.
Naturally, I have no complaints about the comfort of the product and it is very normal to use.
Anyway, it's a normal Helmet holder.
One thing to keep in mind is that if you want to install a Side Back, you'll have to do it differently!
View detail
Dial type is convenient and no key is required.
The XJ6N did not come with a Helmet lock. The Handlebar Clamp comes with two types for Φ22.2/Φ25.4mmHandlebar, and the Φ25.4mm one was Exactly right. I am satisfied with it because it is a Dial type and I don't need a key. View detail
Compared to the Key Type, it has some advantages, but it's a little more subtle.
It is good that the key does not increase in Large, but when it is attached to the Handlebar, the rattling sound always comes out by the vibration of Motorbike, and it is unpleasant. It is a little large in comparison with the key type. It is good if it is a little more Compact. View detail
It's clean.
Helmet's Interior Detergent is unscented and odorless, so you don't have to worry about the smell after washing. It is recommended for long time use interiors as it removes unpleasant odor from sweat. View detail
It's convenient not to need a key.
The best part is that the Dial-style lock doesn't increase the number of keys.
I installed it on the thin rubber seat which I bought at the home center just to make sure not to damage the Handlebar Pipe.
It's convenient and useful.
View detail
The liquid is pure black
ARAI's Helmet's interior sucks on its own! I bought it to try it out to see how much it changes because it has become to the extent that I think that it is By the way, Large body is the one I used for about 4,5 years
I was prepared to be quite dirty, but I put a bag of it in 2 liters of leftover water of the bath Wrinkle washing for the second time
Even if you rinse it out, this stain still comes out
So, I washed it twice
The stain is almost gone and the black liquid (it's my stain) doesn't come out when I rinse it out The stain is almost gone, and the black liquid (it is my stain) doesn't come out even if it is rinsed and wrung out And
The rest is dried in Porch in the shade Just to be sure, it stays in fa BREEZE
The smell is no longer there, though not entirely
Then I looked it up on the Net and found out that neutral detergent would be fine
Probably because it was so dirty, that's how many times you'll have to wash it, and as a result, it's shorter and more expensive I'm glad it's not so expensive, too
I think the smell of a Helmet is something you don't easily notice yourself, so you all can do it from time to time You should wash the interior from
View detail
It's very convenient to have a helmet holder
New ModelKATANA is a NORMAL to Helmet Lock every single time Remove the Seat and put the Seat back on the D Ring on the Helmet on the Frame It was a tedious process that had to be closed
So, one day when I was rummaging around for a compatible Helmet holder, I was lucky enough to find a I was able to get this product for the first time
I installed it after I got home, but I also looked at the Instruction Manual Easy to understand, simple and effortless to complete
The Helmet can be easily locked in place when you are away from the motorcycle for a short period of time It's convenient to do
The disadvantage of this is that there is no way to get rid of the Helmet, except for the motorcycle key One more key for the holder
This is the only way to go
View detail
If you're a Motorcycle rider, I'm sure you're a Large sturdy guy
The mounting area is superb, fitting naturally without compromising the overall design It's almost as if it was already there from the beginning
The holder itself fits well and the Tandem Footpeg does not lose its function
Riding with a helmet is dangerous as it is forbidden to do so, but the Tandem Footpeg It is also good to be able to do it without getting caught when pushing and walking around because of the form that prevents interference with the Tire
The price is a little high for a small product, although it may be appropriate for the quality
In addition, it is easy to install it even for me who doesn't do anything wrong, but Tandem Hexagonal Wrenches in the diameter required to attach and detach the Footpegs are also included in this Kit as an on-board tool Note that it doesn't even come with
Well, I'm sure all motorcycle riders have at least that much, but that's the point I think you need to be careful
View detail
Fits: HONDA CB125R, HONDA CB250R, HONDA CB250R, HONDA CB150R, HONDA CB300R, HONDA CB150R, HONDA CB300R
inconspicuous
I think it's less noticeable than other products because it attaches inside the Tandem Footpeg It is not bad for usability
I leave the key in the lock when I don't normally use it
View detail
Dial system, so you don't need a key
There's no proper place for the ChassisFrame on the Moto Goody V7?s, so the Grab Bar mounted on
However, when you hang the Helmet, it touches the exhaust system, so when you install it If I get the Tandem Footpeg out to support the Helmet, it won't make contact, so we'll see how it goes
The body is made in Well, but the sense of click of Dial is not so good, so the number matching is not good It's hard to do It feels like a hijacked Dial key (-_-;)
The numbers are small and small, so it seems difficult to open at night
The D Ring can be easily hooked up because of the large opening
The ring of SHOEI's Ratchet TypeHelmet is more than a D Ring Small and round, so it takes time to hook up
But you don't have to worry about losing your keys
View detail
I am satisfied with this product and it can be mounted on the Right Side
New ModelKATANA with Quantity:Pair (for Left and Right) It can be mounted on either side
[Was there anything that disappointed you?
None
Do you have any wishes or improvements you would like to make for the Manufacturer?
None
[Do you have any products to compare it to?
Endurance、KIJIMA
What made you decide to buy?
The helmet holder itself is a must-have, but the Quantity:Pair (for Left and Right) It can be installed on either side
I wanted to use it for the Helmet during Tandem
How was your experience with it?
No problems, the texture etc. is solid
Was the installation difficult?
I had it installed at the shop where I bought it and it's not particularly difficult
【Please tell me the installation point and hang】
Unknown because I had it installed at the shop where I bought it
[Was the Instruction Manual easy to understand?
It's a simple Instruction Manual, but there's nothing wrong with it
[Included Parts:were they on?
None
[Others]
The only New ModelKATANA compatible Helmet holder is the Quantity:Pair (for Left and Right) I think this product can be installed in
The company's Grab Bar can also be co-attached
Since there is only one Helmet holder attachment collar included with the Grab Bar Quantity:Pair (for Left and Right) If you want to install a helmet holder on either side, you can use the universal Color is required
Also, the bracket is horizontal, which is perfect for mounting a RearCamera from Draco It is
View detail
I'm so familiar with it that I'm mistaken for an OEM
I installed it in my CB650R just after the release ManufacturerDAYTONA It is as good as it gets, although the quality is perfect The price may be a bit high View detail
It's hard to use
I bought this while I purchased the Multi Mount Bar from DAYTONA
Basically, I don't use it very often, but it was very difficult to use it when hanging the Helmet 1.2 times
It's hard to turn the key around because it feels cheap and the hook is too narrow when you strap on the Helmet the reason is that ...
It is very difficult to use I wanted it to be secure
Also, I don't know if it's the mounting hardware noise while driving, but I don't know if it's the sizzling sound of the mounting hardware It's annoying
(Only during basic acceleration.)
It's also very expensive
View detail