Reviews
Fits: HONDA Rebel 500, HONDA Rebel 250, HONDA Rebel 250, HONDA Rebel1100 DCT, HONDA Rebel1100, HONDA Rebel300
Load capacity up!
The load capacity has been increased to a good level.
I used to have a very large bag, but it wouldn't hold large items, so I'm happy with the Carrier.
I have a feeling that Left Side Bolt is a little bit slanted.
Installation is easy
View detail
Fits: YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400 19, YAMAHA SR400 19, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400
Effective
Recommended to be installed when Saddle bag is installed to stabilize the back. View detail
Fits: KAWASAKI W400, KAWASAKI W400, KAWASAKI W400, KAWASAKI W400, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650
Saddlebag Supports DAYTONA for Kawasaki W400/W650/W800 motorcycle
Installing saddlebag supports DAYTONA on a Kawasaki W650 motorcycle. You can do this yourself quickly and easily. Everything is well written in the instructions. I went several times on trips with bags - everything is fine! I posted a video here about this youtu.be/w2KbzaUu8Bc View detail
Fits: HONDA Rebel250, HONDA Rebel250, HONDA Rebel500
This product is good, but...
I tried to install it on my REBEL 250 2020, but as you can see on You Tube and Net, the bolt of REBEL doesn't come off at all. the hole of Hexagon Bolt is licking, so I applied for installation to Naps before it gets worse.
Naps installation labor is about 3000 yen. Bring it in.
I've heard it can be quite expensive when Bolt licks it, so you may want to bring it in before that happens.
I bought this to mount the bag in the photo.
DEGNER DEGNER: NB-100
Nylon Saddle Bag
We haven't been able to install it yet, because it's been postponed due to rain.
View detail
swell (out)
I feel like it bulges too much on the outside. I plan to replace it with another manufacturer. View detail
I also added a Saddle bag.
It's more durable than I imagined. View detail
It's expensive, but it's only for the V-Star.
I bought this to tie down my Camera tripod. I was happy to be able to fix it Firmly with other Brackets. View detail
Fits: HONDA Rebel1100 DCT, HONDA Rebel1100 DCT, HONDA Rebel1100, HONDA Rebel1100
It looks a little...
In addition to the Saddle Bag, I also wanted to wear a large size seat bag, so I installed it on Both Sides.
In order to avoid interference with the rear suspension, it sticks out to the outside like a large bag, so if the bag is not installed...
The paint seems to be thin and easily scratched, so the parts that get scraped seem to rust easily. If you are concerned about this, why don't you try painting it before installation?
View detail
neither good nor bad
If you want to wear a side bag, you can't start without this, and even when you don't wear a bag, it doesn't stand out and doesn't make a statement, so you don't have to worry about its existence, and you can leave it on. View detail
When you first buy it, you need rust protection!
Overall, it's a rough product, or rather, it's delicate when you think of it as a product of a large hand manufacturer.
The finish was dirty due to poor welding, and I was wondering if it would rust.
I used rust remover while it was still minor, applied rust inhibitor and no problems since.
I wonder if the cost is not too good.
Exclusive Bracket with dirty weld marks and easy to rust, Material is Steel.
However, it is only a special product of the Large hand manufacturer, and the accuracy itself is not bad.
The dedicated bag is also easy to install and can be fixed firmly, so the performance itself can be evaluated.
It's just that it's poorly made and the price is not commensurate with the product.
View detail
Fits: KAWASAKI ESTRELLA, KAWASAKI ESTRELLA, KAWASAKI ESTRELLA, KAWASAKI ESTRELLA, KAWASAKI ESTRELLA, KAWASAKI ESTRELLA, KAWASAKI ESTRELLA, KAWASAKI ESTRELLA, KAWASAKI ESTRELLA, KAWASAKI ESTRELLA, KAWASAKI ESTRELLA, KAWASAKI ESTRELLA, KAWASAKI ESTRELLA, KAWASAKI ESTRELLA, KAWASAKI ESTRELLA
No problem
It worked fine.
A little cheaper would be a perfect score!
Since it is co-tightened with the rear suspension, torque management is required.
Both the Rear suspension and Blinker can be used without any problems.
View detail
If you change the RearShock absorber, it interferes more.
Previously.
After replacing the RearShock absorber with NITRONRear shock, another part interfered with the end of the ABSCover, making it impossible to install the end of the ABSCover.
With a familiarity, it was fused again with solder iron
In this case, the intake air introduction plate on the outside of the fuselage? Cut and welded back inward a little
The point is that it's good if you can control it so that it doesn't suck up the mud and spray that the rear wheel rolls up.
Also, without any consideration of the appearance of the invisible fused surface ω
Well, relocated and done with no problems.
All you need is a solder iron, some motivation, and a hellip;
You can leave it to the PROs in exchange for the money, or you can ride it as a DeFault, which is what you like to do …
View detail
worst case scenario
I bought it before and got Recall and bought it again.
It interferes with the air cleaner and cannot be installed.
In addition, the nail of Case was broken when I tried to put it on a little too hard.
View detail
Returned by Manufacturer due to defective dimensions.
I have returned it, but I can't confirm the return gold.
I don't think it's We-Big's fault since it's a Manufacturer dimensional defect, but I'm not sure about the post processing.
What's going on?
View detail
DIY Small processing can be installed without any problems.
Continued from above
I finally got the time to work on it, so I installed it today.
First, check the interference points.
Indeed, the Air IntakeDuct's terminating ABS rib hits the SupportFrame and cannot be installed
But it's just a rib to ensure the strength of the structure, so I don't think it's going to be much of a problem even if you cut off the interfering part.
Melt down the interference points with a handheld solder iron and solve the problem with an assault.
Can it be said that this place is an application of the ABS welding that was also in the We-BigMagazine article?
If it becomes difficult to secure the strength, I thought about welding the welded part to another part, but I decided it was not necessary and left it as it was.
Quantity for Support with a low cost waterproof bag for everyday use:Set and done.
I threw in my overstocked lockStrap CarabinerDialWire lock
I couldn't do it because of the Large words!
I'm glad it didn't turn out to be "I'm so glad I didn't have to";
It's a DIY easy process, so it should be Challenge rather than Return!
View detail
Fits: KAWASAKI W400, KAWASAKI W400, KAWASAKI W400, KAWASAKI W400, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650
แข็งแรง ทนทาน วัสดุมีคุณภาพ ลงตัวพอดีกับตัวรถ ไม่เกะกะ View detail
I know it's not even close to being delivered, but I've been working on a voluntary recall.
I received a notice of voluntary product recall before the vehicle was delivered, but just in case
I had received a notice of voluntary recall due to a dimensional error, but because the detailed PDF wasn't detailed enough. I called the DAYTONA Customer Center to check it out.
He said that it interferes with the Rib-like protrusion of the fuselage LeftAir duct, just a little bit.
This is not a recovery case for us, but it's not a recovery case for us ω
I went to the trouble of confirming it because I knew that I could install it if I did some DIY work on it because I had the skill. poor
If you have a welding machine, a Disc Grinder and a steel drill, nothing is impossible.
And compared to Ural's Attachment, this level of problem is less than a kindergartnerω
There are a few changes between the carburetor and FI machines. No changes to attachments.
The engine under guard is designed to make the interference part with the exhaust pipe a few centimeters wide. I had to cut myself.
(in addition to)
CT110 HUNTER CUBBODY comes in and processes it and then reports back again.
、
If you're bonsai-oriented or a perfectionist, you can send it back and wait for a good one, but DIY is good, too, you know?
View detail
Fits: HONDA MAGNA(V-TWIN MAGNA), HONDA MAGNA(V-TWIN MAGNA), HONDA MAGNA(V-TWIN MAGNA), HONDA MAGNA(V-TWIN MAGNA), HONDA MAGNA(V-TWIN MAGNA), HONDA MAGNA(V-TWIN MAGNA), HONDA MAGNA(V-TWIN MAGNA), HONDA MAGNA(V-TWIN MAGNA), HONDA MAGNA(V-TWIN MAGNA), HONDA MAGNA(V-TWIN MAGNA)
Install …
Because I put it on with the Rear Carrier, it was a bit wide, but It does not interfere with the Exhaust System or the rear suspension It was just perfect ^^
MAGNA is also silver, so the color tone is right, but the black painted It might be better if we had things, too
View detail
Fits: KAWASAKI W400, KAWASAKI W400, KAWASAKI W400, KAWASAKI W400, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650
I'm wondering if I should buy the other one too
Motive for purchasing
I wanted to put a side bag on it, and when I was riding the ELIMINATOR 250V before When I was using the side bag support with my homemade bracket, the bag melted, so I had to use it I decided to buy a proper one this time because of the new Motorcycle
Good points
It works fine
What I liked about it
Not particularly
Installation difficulty
It's very easy
As you can see, all you have to do is remove the Bolt and pinch it off
View detail
Fits: YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400
Basically, it's not bad
It's basically not bad, as the general review says
SupportThe ring on the underside to prevent flapping is very nice and the rigidity is not bad! Installation itself was very easy
However, I think it's the worst in some ways, or maybe even a little bit of a safety issue, is the mounting Bolt (Front side, where the rear shock is located.) This is a heap of welding in the vicinity
The product photos show a pretty clean one, but the one that came to me has weld marks installed It was heaped up enough to interfere with Bolt
I think that Rear shock will not move because it was tightly clothed, but some things may be It's going to be impossible to install
I'd like to see some improvement there Seriously
View detail