Reviews
Stability as expected
I'm sure it's being developed ahead of time to some extent.
It would be very nice to see car model-specific PARTS available sooner rather than later.
BoltQuantity for installation:Since there are only two PCs, there is no need to hesitate.
It is important to note that OEMBolt is the OEM Color and Quantity:The resin cover is fastened with a set.
Leave the OEM Color as it is and replace only the OEMBolt.
We use the 18L Daytona Waterproof BagDHS-32.
At the beginning of the installation, I was concerned about the long, rearward skimming with the car body.
If you take a closer look at the bag, you will see that it is quite a bit like a blinker, sass, and limit, so I think the largest limit is here.
I drove on the highway and had no problems.
I was given the opportunity to see it running on Winding from behind.
It seemed to be particularly stable without any sagging.
The price is reasonable, and I think there is no harm in buying it.
View detail
Fits: YAMAHA DRAGSTAR250, YAMAHA DRAGSTAR250, YAMAHA DRAGSTAR250, YAMAHA DRAGSTAR250, YAMAHA DRAGSTAR250, YAMAHA DRAGSTAR250, YAMAHA DRAGSTAR250, YAMAHA DRAGSTAR250, YAMAHA DRAGSTAR250, YAMAHA DRAGSTAR250, YAMAHA DRAGSTAR1100, YAMAHA DRAGSTAR1100, YAMAHA DRAGSTAR1100, YAMAHA DRAGSTAR1100, YAMAHA DRAGSTAR1100, YAMAHA DRAGSTAR1100, YAMAHA DRAGSTAR1100, YAMAHA DRAGSTAR1100, YAMAHA DRAGSTAR1100, YAMAHA DRAGSTAR1100Classic
Quantity:Pair (for Left and Right) Might we need it?
Necessary to prevent Side Back entrapment.
It is easy to install.。
Required when installing Side Back on American without load capacity.
Accident prevention.
The other side is also needed.
View detail
KITACO's side bag support is not sold, so this one
KITACO×GEARSShock absorber installed on DAX125, plus WorldWalk DAX125 Rear box carrierQuantity:Set is installed.
The collar interferes with the carrier and cannot be installed as it is. Although some modification is required, it is easy to use because the clearance with the rear suspension and the angle of the helmet holder is slightly off to the front.
Helmet holder cannot be used when Tour Shell Case is attached.
View detail
No presence, in a good way.
The frame is thin and unobtrusive in a good sense, and does not interfere with the design of the CT110 HUNTER CUB. My favorite. View detail
Made by DAYTONA for peace of mind.
I purchased this together with the Daytona Side Back to install. It was easy to install and I don't think there is anything to worry about.
I don't know about durability such as rust, so we will have to wait and see.
View detail
Can be attached at the same time as the OEM Rear Carrier and comes with a helmet holder!
I bought the OEMRear Carrier first and wanted to add the Side Back later, so I bought this product.
It was a great help because there are not many OEMRear Carriers that can be installed at the same time.
And it comes with a helmet holder, which is very convenient.
I have a 9L side bag on it and so far it seems to be durable enough.
View detail
Fits: HONDA Rebel1100 DCT, HONDA Rebel1100 DCT, HONDA Rebel1100, HONDA Rebel1100
Speaking of Cruiser, …
I bought it because I wanted to attach a saddle bag to my Cruiser?
Two different lengths of screws were included in the package, so I think it will be easy to attach them as long as you read the instruction manual to make sure you do not make a mistake.
I don't know if the exhaust system interferes with the Saddle Bag, so I think it would be better to check if the Saddle Bag can be installed before installing the Saddle Back Support. I think it is better to check if your backpack can be attached before you start the main installation of Saddle Back Support.
Saddle bag is HenryBegins:Henry beguine
DHS-1 Saddle Bag 9L for Exhaust System Side Correspondence was installed.
View detail
Fits: YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400 19, YAMAHA SR400 19, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400
Quantity:Pair (for Left and Right) Considering the Balance of
Although there is no specific use for this product, we purchased and installed it for Left Side Support and Bag Balance.
Bag is not attached, but it looks good with a somewhat retro image.
View detail
Appearance is not so clear
Installation was easy and quick.
I haven't run with the Back installed yet, so I don't know how strong it is.
View detail
Fits: KAWASAKI W400, KAWASAKI W400, KAWASAKI W400, KAWASAKI W400, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650
If you want to put on Side Back, this is the one.
W800 (2022) I purchased this product in order to install Side Back on my car. Even with a moderate speed, it prevents interference with the rear suspension and other components. The photo shows the side back made by DEGNER installed. View detail
Fits: HONDA GB350S
OK for everyday use
It is not very noticeable without the Side Back, so I think it can be worn all the time on a regular basis.
However, I am a little concerned about the fact that there are two helmet holders for convenience. I chose this one because I need it.
View detail
Fits: KAWASAKI ESTRELLA, KAWASAKI ESTRELLA, KAWASAKI ESTRELLA, KAWASAKI ESTRELLA, KAWASAKI ESTRELLA, KAWASAKI ESTRELLA, KAWASAKI ESTRELLA, KAWASAKI ESTRELLA, KAWASAKI ESTRELLA, KAWASAKI ESTRELLA, KAWASAKI ESTRELLA, KAWASAKI ESTRELLA, KAWASAKI ESTRELLA, KAWASAKI ESTRELLA, KAWASAKI ESTRELLA
ESTRELLASide Support
Be sure to work with the Center Stand in an upright position.
Also, as mentioned in the Instruction Manual, the Nut will rotate.
ESTRELLA 2007 is 14mm inside and 12mm outside. Wrench was used
View detail
Fits: KAWASAKI W400, KAWASAKI W400, KAWASAKI W400, KAWASAKI W400, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650
Also available for K3. Best Match♪
I ordered one for my K3 that I just took delivery of because I was told that it could be installed on a W800.
The plating quality is good, polished and very gorgeous.
Installation was as easy as I expected and took about 30 minutes.
The Side Back I prepared was a little dreary, so I would like to Grade UP on my next payday.
View detail
Back support
It is made by DAYTONA and is solid.
It has a helmet holder, but when I put a 12L backpack on it, it becomes difficult to fasten the helmet and I don't use it much.
I think 12L Size Back is Style-wise better for GB350.
View detail
Fits: YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400 19, YAMAHA SR400 19, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400
Great addition to my bike!
The material and the finish are excellent! But what I also like about this saddlebag support is that it blends well with the bike. Even without saddlebags, the lines of the saddlebag support look great on the bike. I can say it has been excellently designed as far as aesthetics are concerned. My friend helped me in the installation and it turned out out it was really easy to install. I thought I was going to have trouble with the rear shocks and I was afraid I might break it on the weld part. But the material looks thick specially in the mounting plate area. Solid product! I was happy with it that I also ordered another one for the left side. View detail
Fits: HONDA SUPER CUB 50, HONDA SUPER CUB110, HONDA CROSS CUB50, HONDA CROSSCUB110
DAYTONASide Back Support
The product is not bad, but I think it is a little expensive. If it were a little cheaper, I think it would sell. View detail
Fits: YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400 19, YAMAHA SR400 19, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400
SR400 Daytona Side Bracket
The product is satisfactory. There is also a hook for fixing the bag at the bottom, so it seems a bit more stable. I haven't mounted it with weight yet, so I don't know how durable it is, but the weld looks good. Shipping is EMS, but it was slow. In the past, delivery arrived in 2-3 days, but I have to wait 5 days due to high volume. The product is satisfactory. Can hold the bag underneath It also has a ring, so it's a little more stable. I haven't installed it with any weight yet, so how is the durability? I don't know, but the weld looks good. Shipping is EMS, but it was slow. In the past, delivery arrived in 2-3 days, but is there a lot of stock? You have to wait 5 days. View detail
Fits: HONDA SUPER CUB 50, HONDA SUPER CUB110, HONDA CROSS CUB50, HONDA CROSSCUB110
DAYTONASaddlebag Supportfor Right Side
The installation Instruction Manual was Large and complicated, making it difficult to install the Belt.
The Large is just right and easy to use.
View detail
Fits: SUZUKI Gixxer 150., SUZUKI Gixxer 250, SUZUKI Gixxer SF250
Small is here.
The area to support the side back is small and the front portion of the side back is in contact with the tail cowl, so a protection seal is essential. The support part is originally put on to prevent the back from coming in contact with the cowl, but it doesn't make much sense and I honestly wish I didn't have to buy it. The Support part should be larger so that it can be used for a larger size. View detail
Fits: KAWASAKI W400, KAWASAKI W400, KAWASAKI W400, KAWASAKI W400, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650
chrome
chrome quality is very good and simple. Price is price so high uu but next time ill buy this item, look so usefull item for me View detail