Reviews
Very good.
Motard bikes do not have space to store the body, and I was concerned about the large size of the body. I chose this model because the body is small and the connecting cable is SMART and thin.
I was very anxious about the purchase, but I was able to install it without any problems, and I am glad that I was able to use the included double-sided tape and tie wrap instead of using a bracket.
View detail
The installation was Large strange, but I am satisfied.
Because of ADV160, it takes time to detach Cowl and handle Wiring.
It took almost a day, but the images are beautiful.
The Bluetooth connection was also not bad.
If possible, we hope that it will not have to be used to verify the accident.
View detail
TimePlus is fun!
Image quality (default 58 fps) is fair
The daytime image quality Number can barely recognize all letters before and after the stop, and 4-digit numbers at the back of the second unit of Right.
When you start driving, you can recognize 4-digit numbers even in the front and back.
One point, I would like to add that there are three picture quality settings:58fps, HDR, and HDR.
1080p/58fps、1080p/29fps、HDR1080p/29fps
Motorcycle is not good for drareco
Yamaha・XG250 TRICKER
I can't compare the picture quality because it's my first driver's camera, but I felt the picture quality wasn't as good as I thought it would be.
There may be a single-cylinder effect and a problem with the location of the installation.
The app is a little unstable, but useful.
The high quality MODE of 1min1File58fps is 100MB, and the DOWNLOAD feels quicker at about 7 seconds.
I think it is easy to use (although I don't know about other apps) because it also shows map and speed during video playback and the own car Pin works.
However, when I tried to play and DL other files, the Wi-Fi connection was broken, etc. It seemed a little unstable.
The SDCard is screwed into the Plus, so it is good to be able to watch videos without the need to remove the SD card.
・TimePlus
The 1 hour and 15 minute run was combined into one video of approximately 5 minutes and 350 MB.
The video is one File per minute (default value) and the GPS on the map is only that section, but
With TimePlus, the entire driving route is displayed, making it easy to look back and enjoy looking back.
View detail
Convenient to have!
I could not find a good place to mount it, so I bought a Mirror mount because it was EXACTLY what I wanted. As a result, it was Exactly!
I was able to install it without any problems, but I am only worried about theft.
The screws are dedicated to prevent theft, but if the Bracket is broken or the Mirror is removed, it is the end of the world.
I would rather be able to take it off and on easily, so I can carry it with me.
So, I am Covering as a self defense.
View detail
New car installation
Control switch of JupiterNavigation, which is frequently used, is installed on the Left Side.
DAYTONA DAYTONA:DriveRecorder-Control switch with MirrorM10Clamp installed on the Right Side.
View detail
OGK I put it on EXCEED.
B+COM Sorry.
OGK for summer Dislike BoomMicrophone for EXCEEDHelmet's Income and B+COM B-COM:WireMicrophoneHolder is now available and used for SENA20S
The Double-sided Tape on the Mounting Adapter seemed weak.
View detail
Dora Reco for Front
I was looking for a place to mount the FrontCamera for the DRA recorder and was looking for some related parts and I found this.
I think the price is a little high, but I am satisfied.
View detail
It's worth a try
When we replayed the first video from the DVR, we could not hear anything but the terrible Wind Cutting sound.
I was looking for an Option product at that time and happened to find it and bought it.
When we tried it, the Wind Cutting sound was considerably suppressed and the Engine sound could be heard on the Level, and we were fairly satisfied.
Try it and see.
(Can't we at least include this in the package?)
View detail
Also available as for Front.
Used for NMAX for Front.
It can also be used for FrontCamera by replacing the rings and Bolt & Nut.
The "for Rear" is not usable as it is because the outer diameter of the Camera is different.
The Bolt for this product is Torque.
View detail
I bought the Repair item because I only needed the front.
When it comes to cost performance, Quantity:Set purchase would be best, but
I bought the forward CameraSingle Item because the rear Camera and other parts are wasted.
The images are only information about the installation of the system in such a place.
I went to DIYCenter and bought a 1.5mm thick AngleBracket of a board for about 100-200 yen. Buy an AngleBracket about 1.5mm thick.
Drill a 6mm hole in the Motorcycle Bracket to tighten it together, and paint it black.
It seems that double-sided tape is the basic method of attaching a bracket for a camera, but I was a little worried about it.
Tie Wrap was also fixed.
View detail
As a countermeasure for Wind Cutting sound
I bought and use it for DDR-S100.
I drive about 5,000km a year for touring and it lasts me about a year.
Others, it wears in the BodyMicrophone of AS300 of SONY, Wind Cutting reduction is built in this machine, but I put it with the measure of the dust and the insect, the sound enters beautifully.
View detail
Exclusive Bracket is the most stable in the Exclusive Bracket
This is the most useful Bracket of the various DDR-S100 Bracket purchases I've made
I have two motorcycles, both of which can be mounted front and rear I've been using two DDR-S100's in total, so it's easy to install and remove this Bracket is useful
The other rackets that are exclusive to the company require a lot of work to install and remove, so this is still the one Number one
Mount (L-) even though it contains a bracket for vertical, horizontal and Helmet Plastic to be attached to TypeBracket and HelmetBracket by Bolt There's only one (part of the?) itchy part, so I had to procure a whole set of them Inconvenience
I feel that 3,000 yen is a bit high for one Mount I'd like to see them divide it up into more options
View detail
For unpleasant wind cutting sounds
Purchased for DDR-S100
I'm thankful for the 2-pack because I have DDR-S100 installed in front and back
Standard Included Parts:the kind of thing you wish you had included from the start as Standard Included Parts
The wind cutting sound is reduced and the feeling of use is good
It's going to peel off when it gets wet
It seems like I could make it myself, but I used the company's products for peace of mind
View detail
Fits: その他
Necessary if you want to stick with the OEMOption
DAYTONADAYTONA:98815 DriveRecorder - Obstruction for DDR-S100 Clamp set [Drorekos] I installed it with the
Thick and solid feeling with a complete set of knots
It's nice not to have to get it all together
Because it is made on the premise that the OEM resin bracket is used
If you're going to use the option Gold Bracket, maybe you can use the Homsen Bracket I think
If you want to use Bracket of the Gold genus, you need to use the same bolts
(The thickness of the bracket is increased by attaching a Gold bracket)
Separately
CFPOSHCFBosch:For fixing the SUSNumber plate TorqueTaperBolt & Nut Set
CFPOSHCFBosch:M6Torque (T30) I used Center dot taper bolts 25mm in length
View detail