Reviews
Bracket on the bar does not fit.
The angle of the bar mounting Bracket is not correct. I was able to bend it by force, so I guess it is acceptable, but I wonder if it is such a lax thing. Or did I receive a different product? View detail
Fits: SUZUKI GSX1300 HAYABUSA, HONDA CBR400R (2013-), HONDA CBR500R, HONDA CBR500R
Multi Bar with USB power supply for convenience
Quantity of Smartphone Holder:If set, the USB power supply can be conveniently located nearby. The installation can be safely used in conjunction with the key by connecting it to ACC.
Connected to DAYTONA Attachment Power Supply Unit D-UNIT.
View detail
DAYTONAMulti Bar Holder。
This is a quintessential DAYTONA product.
Fitting is outstanding.
Holderetc. on the bar.
View detail
Paint job is messy?
Matte paint nomenclature is present, but the overall texture of the paint is nowhere near as good.
The peeling paint on the Bolt is particularly disappointing.
Nevertheless, it is nice to be able to add Accent by using the Cap bolt collar, which is sold separately.
View detail
Fits: SUZUKI GSX-R750, SUZUKI GSX-R750, SUZUKI GSX-R750, SUZUKI GSX-R750, SUZUKI GSX-R600, SUZUKI GSX-R600, SUZUKI GSX-R1000, SUZUKI GSX-R600, SUZUKI GSX-R600, SUZUKI GSX-R600, SUZUKI GSX-R1000, SUZUKI GSX-R1000, SUZUKI GSX-R1000, SUZUKI GSX-R1000, KAWASAKI ZZR1400 (ZX-14), KAWASAKI ZZR1400 (ZX-14), KAWASAKI ZZR1400 (ZX-14), KAWASAKI ZZR1400 (ZX-14), KAWASAKI ZZR1400 (ZX-14), KAWASAKI ZZR1400 (ZX-14)
On Stem Mount
[How is it used?
GSX-R600 (K6) I purchased this product to install DAYTONA's Multi Bar on my
The compatibility list said that the model year was 2008 or later, but I measured the diameter on the actual vehicle and confirmed that there was no problem, so I chose this model.
Was the one you received as per Image?
I had bought other Sizes before, so it was as per Image.
How was your experience with it?
I confirmed beforehand that Size was fine, so of course I could use it.
Simply put it through the Mount on the Multi Bar, put it in the Stem Nut, and then tighten the Bolt.
Multi Bar could be fixed Firmly.
[Points to note]
It is recommended to measure the diameter of your motorcycle in advance as well as the fit.
How did it compare to other products?
I chose DAYTONA because it was troublesome to check the compatibility with Multi Bar or the hole diameter, etc.
Depending on the price, a cheap No Brand product would be fine.
【Review】
You can easily fix the Multi Bar to the Stem.
It is recommended to measure the inside diameter of your car's Stem to be sure.
View detail
Fits: HONDA VTR250, YAMAHA MT03, HONDA Forza300, HONDA CB500X, HONDA CB500F, HONDA CB150R, YAMAHA XSR900, YAMAHA MT-25, YAMAHA MT-09, SUZUKI Gixxer 150., SUZUKI Gixxer 250, SUZUKI DL1000 V-STROM250, HONDA HORNET250, HONDA FORZA Si, HONDA FORZA Si, HONDA JADE, HONDA glom, HONDA CROSSCUB110, HONDA APE 50, HONDA XR100MOTARD
CROSSCUB110/Mounted on JA60
CROSSCUB110 (JA60) The product has been installed in the
However, the supplied boltc. is M8 size, so it cannot be installed as it is.
The handlebar mounting bolt on the CROSS CUB is M6 size, so it will fit.
Bolt×2 pieces of M6 - Collar (Spacer) of M6×Quantity:2pc. Set is the minimum requirement. I bought it from Net mail order because it is not sold in Home center around here. I bought the M6 Washer×Quantity:2pc. Set was also used.
☆ Reference
M6 Bolt…M6 x 45mm Bolt With Hexagon Hole/Half-Screw
M6 color (Spacer) …13X6.2X15
M6 Washer is sold at home centers around the area.
It is not impossible to substitute the M6 collar (Spacer) with the M8 collar that comes with the product, but I bought the M6 one because it might be wobbly.
Quantity of the four Bolts at the Center of the Handlebar Mounting section in the front.:Remove and install the 2pc.
As shown in the photo, JA60 has almost no clearance between the Multi Bar and the Meter, so parts to be attached to the center of the Multi Bar may not be suitable or require some ingenuity.
View detail
Fits: HONDA CBR600RR, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300 HAYABUSA, SUZUKI GSX-R1000
Cheap and convenient.
I used it on my GSX1300R HAYABUSA
I think it is essential for Smartphone Holder installation.
Cosmetically, it's great.
View detail
Just the right height
I bought this to hold my Driveman in place. The height is just right so the image Angle can be taken well. View detail
Fits: YAMAHA MAJESTYS, YAMAHA MT-25, YAMAHA XSR900, YAMAHA MT-09, SUZUKI GSX250R, SUZUKI GSX250R, HONDA HORNET250, SUZUKI GSX250R, HONDA FORZA Si, HONDA FORZA Si, HONDA JADE, HONDA glom, HONDA VTR250, HONDA XR100MOTARD, HONDA PCX160, HONDA VTR250, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SUPER BOLDOR
I was able to install it on a '22 MT-07 with no problems.
I was able to install it on a '23 MT-07 without any problems, only the HandlebarRight Side is possible.
Since MT-07 is not included in the warranty for this product by DAYTONA, I purchased a longer bar from another manufacturer. However, I was worried that the bar might shake and my phone might fall off when I actually ride the bike, probably because the mirror bracket on the bar is a thin plate.
This product from DAYTONA was comfortable to use because there was almost no rattling or shaking.
I chose the longer bar, but the Quantity:Pair (for Left and Right) It would have been better if it could be slid to "1", or if it was a smartphone 1pc. it would have been better to have a shorter bar.
I thought it would have scored 100 points if the attached color and Bolt color were also Black color.
View detail
Installation of a 23 year old Ninja 400 is OK!
Installed on a '23 Ninja 400.
We were able to install the system without any problems.
Screws are not so hard that they cannot be removed, so I think a regular Hexagonal Wrench is Large sturdy.
If you ride a Ninja 400 and want to install a Smartphone Holder or USB Socket, this is a good choice!
View detail
Fits: KAWASAKI Ninja ZX-25R SE KRT Edition, KAWASAKI Ninja ZX-25R SE, KAWASAKI Ninja ZX-25R, KAWASAKI Ninja ZX-4R SE
DAYTONAVehicle Type Multi Bar Holder
I purchased this product because it is required for Smartphone Holder installation. View detail
Fits: HONDA VTR250, HONDA PCX125, HONDA PCX125, HONDA NT700V DEAUVILLE, HONDA NC750X, HONDA NC700X, HONDA NC700X, HONDA NC700S, HONDA NC700S, HONDA FTR223, HONDA FTR223, HONDA CT125, HONDA CRF250L, HONDA CB650R, HONDA CB400SUPER BOLDOR, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF
Mobile Holder
I am glad that the handlebar was in the wrong position when I put it on the handlebar, but it is where I want to put it. View detail
Fits: HONDA VTR250, HONDA PCX125, HONDA PCX125, HONDA NT700V DEAUVILLE, HONDA NC750X, HONDA NC700X, HONDA NC700X, HONDA NC700S, HONDA NC700S, HONDA FTR223, HONDA FTR223, HONDA CT125, HONDA CRF250L, HONDA CB650R, HONDA CB400SUPER BOLDOR, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF
Smartphone fixed
Power supply and phone are easier to attach than Handlebar. View detail
Fits: HONDA CRF250RALLY S, HONDA CRF250RALLY, Others , HONDA CB1100 RS, HONDA CB125R, HONDA CB250R, HONDA CB250R, HONDA CB650R, HONDA CBR250RR(2017-), HONDA CT125, HONDA PCX125, HONDA PCX160, KAWASAKI Z1000 (water-cooled), KAWASAKI Z125 PRO, KAWASAKI NINJA2 Helmet50RSL, SUZUKI GSX-S1000F, YAMAHA MT-03 (2015-), YAMAHA MT-25, HONDA CB150R, HONDA CB300R
More convenient to add accessories
This short clamp really added flexibility to add accessories. With a wide variety of accessories that is able to mount on this clamp, i now have more options to make my bike more practical and functional. It is easy to install, tip is make sure you label/mark the original master cylinder location so that when you mount it back, it will be on the same original position. As you can see from my image, i used this clamp to install a hazard switch & a USB-C charger+voltmeter. View detail
It's perfect
The installation is not difficult and can be completed in a few minutes with some skill. I think it looks good and refreshing. View detail
Fits: SUZUKI GSX1300 HAYABUSA, HONDA CBR400R (2013-), HONDA CBR500R, HONDA CBR500R
Recommendation is to purchase at the same time as Harness.
Considering the posture of bending over during Screen, I was happy with Short. View detail
Fits: HONDA CB250R, HONDA CB250R, HONDA CBR250R (2011-), HONDA CBR250R (2011-), HONDA CBR250RR (MC22), HONDA CBR250RR (MC22), HONDA CBR250RR (MC22), HONDA CBR250RR (MC22), HONDA CBR250RR (MC22), HONDA CBR400R (2013-), HONDA CBR600RR, HONDA CBR600RR, HONDA NSR250R, YAMAHA YZF-R25, HONDA CB300R, HONDA CBR500R, YAMAHA YZF-R3
SmallEngine Displacement VolumeParts that are helpful for cars!
[How is it used?
I bought it because there was no Space for Handlebar in the additional Meteretc. and it was difficult to install ActionCamera.
Was the one you received as per Image?
Although it is called "Small size", it looks like a large size for CD50.
Was the installation difficult?
Installation can be done with a single bolt.
I installed it on a MeterAdapter.
How was your experience with it?
I think it looks lumpy, but you can't beat the convenience.
The range during touring has been expanded.
[Included Parts:were they on?
Nothing else in particular.
[Was there anything that disappointed you?
Steel, so Wound will be noticeable.
It is inexpensive Parts, but it would have been nice if it had a more luxurious feel.
▼Various sizes are available in the Lineup, which is very nice because it can be used for different purposes.
View detail
Fits: HONDA VTR250, YAMAHA MT03, HONDA Forza300, HONDA CB500X, HONDA CB500F, HONDA CB150R, YAMAHA XSR900, YAMAHA MT-25, YAMAHA MT-09, SUZUKI Gixxer 150., SUZUKI Gixxer 250, SUZUKI DL1000 V-STROM250, HONDA HORNET250, HONDA FORZA Si, HONDA FORZA Si, HONDA JADE, HONDA glom, HONDA CROSSCUB110, HONDA APE 50, HONDA XR100MOTARD
Mounted on PCX125 (8bj)
I bought this for my PCX125 (8bj) to install a Smartphone Holder and a USB charging port, but I didn't want to put a Wound on the Handlebar and I wanted to mount my phone as far forward as possible. PostClamp type. I had installed the Plating type on my W650 a long time ago, but after using it for many years, the rust would inevitably appear, so I chose the Black color with the expectation that it would be less noticeable.
Looks fine. Easy to install.
View detail
Fits: HONDA CB250R, HONDA CB250R, HONDA CBR250R (2011-), HONDA CBR250R (2011-), HONDA CBR250RR (MC22), HONDA CBR250RR (MC22), HONDA CBR250RR (MC22), HONDA CBR250RR (MC22), HONDA CBR250RR (MC22), HONDA CBR400R (2013-), HONDA CBR600RR, HONDA CBR600RR, HONDA NSR250R, YAMAHA YZF-R25, HONDA CB300R, HONDA CBR500R, YAMAHA YZF-R3
Smartphone Holder Mounting
Purchased and installed to attach to a Smartphone Holder I have.
Stem hole installation is easy and can be done in a few seconds.
View detail
Fits: HONDA Rebel500, HONDA Rebel250, HONDA Rebel1100, HONDA Rebel1100 DCT, HONDA Rebel300
I have received it well
Delivery was fast and it arrived perfectly packaged. I ordered it to be mounted on the Rebel 1100 and used as a holder for fixing the block. I haven't installed it yet, but I'm glad it's not as big as I thought... I thought it would be cumbersome because of the handle if it were too big, but it was very appropriate. Because of its size, I think it would be great to use for fixing a black box or action cam. I am satisfied. View detail