Reviews
Fits: SUZUKI GSX1300 HAYABUSA, HONDA CBR400R (2013-), HONDA CBR500R, HONDA CBR500R
Multi Bar with USB power supply for convenience
Quantity of Smartphone Holder:If set, the USB power supply can be conveniently located nearby. The installation can be safely used in conjunction with the key by connecting it to ACC.
Connected to DAYTONA Attachment Power Supply Unit D-UNIT.
View detail
DAYTONAMulti Bar Holder。
This is a quintessential DAYTONA product.
Fitting is outstanding.
Holderetc. on the bar.
View detail
Fits: HONDA VTR250, YAMAHA MT03, HONDA Forza300, HONDA CB500X, HONDA CB500F, HONDA CB150R, YAMAHA XSR900, YAMAHA MT-25, YAMAHA MT-09, SUZUKI Gixxer 150., SUZUKI Gixxer 250, SUZUKI DL1000 V-STROM250, HONDA HORNET250, HONDA FORZA Si, HONDA FORZA Si, HONDA JADE, HONDA glom, HONDA CROSSCUB110, HONDA APE 50, HONDA XR100MOTARD
CROSSCUB110/Mounted on JA60
CROSSCUB110 (JA60) The product has been installed in the
However, the supplied boltc. is M8 size, so it cannot be installed as it is.
The handlebar mounting bolt on the CROSS CUB is M6 size, so it will fit.
Bolt×2 pieces of M6 - Collar (Spacer) of M6×Quantity:2pc. Set is the minimum requirement. I bought it from Net mail order because it is not sold in Home center around here. I bought the M6 Washer×Quantity:2pc. Set was also used.
☆ Reference
M6 Bolt…M6 x 45mm Bolt With Hexagon Hole/Half-Screw
M6 color (Spacer) …13X6.2X15
M6 Washer is sold at home centers around the area.
It is not impossible to substitute the M6 collar (Spacer) with the M8 collar that comes with the product, but I bought the M6 one because it might be wobbly.
Quantity of the four Bolts at the Center of the Handlebar Mounting section in the front.:Remove and install the 2pc.
As shown in the photo, JA60 has almost no clearance between the Multi Bar and the Meter, so parts to be attached to the center of the Multi Bar may not be suitable or require some ingenuity.
View detail
Fits: HONDA CBR600RR, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300 HAYABUSA, SUZUKI GSX-R1000
Cheap and convenient.
I used it on my GSX1300R HAYABUSA
I think it is essential for Smartphone Holder installation.
Cosmetically, it's great.
View detail
Fits: YAMAHA MAJESTYS, YAMAHA MT-25, YAMAHA XSR900, YAMAHA MT-09, SUZUKI GSX250R, SUZUKI GSX250R, HONDA HORNET250, SUZUKI GSX250R, HONDA FORZA Si, HONDA FORZA Si, HONDA JADE, HONDA glom, HONDA VTR250, HONDA XR100MOTARD, HONDA PCX160, HONDA VTR250, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SUPER BOLDOR
I was able to install it on a '22 MT-07 with no problems.
I was able to install it on a '23 MT-07 without any problems, only the HandlebarRight Side is possible.
Since MT-07 is not included in the warranty for this product by DAYTONA, I purchased a longer bar from another manufacturer. However, I was worried that the bar might shake and my phone might fall off when I actually ride the bike, probably because the mirror bracket on the bar is a thin plate.
This product from DAYTONA was comfortable to use because there was almost no rattling or shaking.
I chose the longer bar, but the Quantity:Pair (for Left and Right) It would have been better if it could be slid to "1", or if it was a smartphone 1pc. it would have been better to have a shorter bar.
I thought it would have scored 100 points if the attached color and Bolt color were also Black color.
View detail
Installation of a 23 year old Ninja 400 is OK!
Installed on a '23 Ninja 400.
We were able to install the system without any problems.
Screws are not so hard that they cannot be removed, so I think a regular Hexagonal Wrench is Large sturdy.
If you ride a Ninja 400 and want to install a Smartphone Holder or USB Socket, this is a good choice!
View detail
Fits: KAWASAKI Ninja ZX-25R SE KRT Edition, KAWASAKI Ninja ZX-25R SE, KAWASAKI Ninja ZX-25R, KAWASAKI Ninja ZX-4R SE
DAYTONAVehicle Type Multi Bar Holder
I purchased this product because it is required for Smartphone Holder installation. View detail
Fits: HONDA VTR250, HONDA PCX125, HONDA PCX125, HONDA NT700V DEAUVILLE, HONDA NC750X, HONDA NC700X, HONDA NC700X, HONDA NC700S, HONDA NC700S, HONDA FTR223, HONDA FTR223, HONDA CT125, HONDA CRF250L, HONDA CB650R, HONDA CB400SUPER BOLDOR, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF
Mobile Holder
I am glad that the handlebar was in the wrong position when I put it on the handlebar, but it is where I want to put it. View detail
Fits: HONDA VTR250, HONDA PCX125, HONDA PCX125, HONDA NT700V DEAUVILLE, HONDA NC750X, HONDA NC700X, HONDA NC700X, HONDA NC700S, HONDA NC700S, HONDA FTR223, HONDA FTR223, HONDA CT125, HONDA CRF250L, HONDA CB650R, HONDA CB400SUPER BOLDOR, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF
Smartphone fixed
Power supply and phone are easier to attach than Handlebar. View detail
Fits: HONDA CRF250RALLY S, HONDA CRF250RALLY, Others , HONDA CB1100 RS, HONDA CB125R, HONDA CB250R, HONDA CB250R, HONDA CB650R, HONDA CBR250RR(2017-), HONDA CT125, HONDA PCX125, HONDA PCX160, KAWASAKI Z1000 (water-cooled), KAWASAKI Z125 PRO, KAWASAKI NINJA2 Helmet50RSL, SUZUKI GSX-S1000F, YAMAHA MT-03 (2015-), YAMAHA MT-25, HONDA CB150R, HONDA CB300R
More convenient to add accessories
This short clamp really added flexibility to add accessories. With a wide variety of accessories that is able to mount on this clamp, i now have more options to make my bike more practical and functional. It is easy to install, tip is make sure you label/mark the original master cylinder location so that when you mount it back, it will be on the same original position. As you can see from my image, i used this clamp to install a hazard switch & a USB-C charger+voltmeter. View detail
It's perfect
The installation is not difficult and can be completed in a few minutes with some skill. I think it looks good and refreshing. View detail
Fits: SUZUKI GSX1300 HAYABUSA, HONDA CBR400R (2013-), HONDA CBR500R, HONDA CBR500R
Recommendation is to purchase at the same time as Harness.
Considering the posture of bending over during Screen, I was happy with Short. View detail
Fits: HONDA VTR250, YAMAHA MT03, HONDA Forza300, HONDA CB500X, HONDA CB500F, HONDA CB150R, YAMAHA XSR900, YAMAHA MT-25, YAMAHA MT-09, SUZUKI Gixxer 150., SUZUKI Gixxer 250, SUZUKI DL1000 V-STROM250, HONDA HORNET250, HONDA FORZA Si, HONDA FORZA Si, HONDA JADE, HONDA glom, HONDA CROSSCUB110, HONDA APE 50, HONDA XR100MOTARD
Mounted on PCX125 (8bj)
I bought this for my PCX125 (8bj) to install a Smartphone Holder and a USB charging port, but I didn't want to put a Wound on the Handlebar and I wanted to mount my phone as far forward as possible. PostClamp type. I had installed the Plating type on my W650 a long time ago, but after using it for many years, the rust would inevitably appear, so I chose the Black color with the expectation that it would be less noticeable.
Looks fine. Easy to install.
View detail
Fits: HONDA CB250R, HONDA CB250R, HONDA CBR250R (2011-), HONDA CBR250R (2011-), HONDA CBR250RR (MC22), HONDA CBR250RR (MC22), HONDA CBR250RR (MC22), HONDA CBR250RR (MC22), HONDA CBR250RR (MC22), HONDA CBR400R (2013-), HONDA CBR600RR, HONDA CBR600RR, HONDA NSR250R, YAMAHA YZF-R25, HONDA CB300R, HONDA CBR500R, YAMAHA YZF-R3
Smartphone Holder Mounting
Purchased and installed to attach to a Smartphone Holder I have.
Stem hole installation is easy and can be done in a few seconds.
View detail
Fits: HONDA Rebel500, HONDA Rebel250, HONDA Rebel1100, HONDA Rebel1100 DCT, HONDA Rebel300
I have received it well
Delivery was fast and it arrived perfectly packaged. I ordered it to be mounted on the Rebel 1100 and used as a holder for fixing the block. I haven't installed it yet, but I'm glad it's not as big as I thought... I thought it would be cumbersome because of the handle if it were too big, but it was very appropriate. Because of its size, I think it would be great to use for fixing a black box or action cam. I am satisfied. View detail
Fits: HONDA CB250R, HONDA CB250R, HONDA CBR250R (2011-), HONDA CBR250R (2011-), HONDA CBR250RR (MC22), HONDA CBR250RR (MC22), HONDA CBR250RR (MC22), HONDA CBR250RR (MC22), HONDA CBR250RR (MC22), HONDA CBR400R (2013-), HONDA CBR600RR, HONDA CBR600RR, HONDA NSR250R, YAMAHA YZF-R25, HONDA CB300R, HONDA CBR500R, YAMAHA YZF-R3
Attachment
By adding this, the selection of Attachment is expanded,
I added USB power supply and Smartphone Holder.
In winter, it would be electric heating gloves.
View detail
Fits: SUZUKI GSX-R1000, HONDA CBR500R, SUZUKI GSX-R1000, HONDA VFR1200F DualClutchTransmission, HONDA VFR1200F DualClutchTransmission, HONDA NSR250R, HONDA CBR650R, HONDA CBR600RR, HONDA CBR400R, HONDA CBR400R (2013-), HONDA CBR250RR (MC22), HONDA CBR250RR (MC22), HONDA CBR250RR (MC22), HONDA CBR250RR (MC22), HONDA CBR250RR (MC22), HONDA CBR250R (2011-), HONDA CBR250R (2011-), HONDA CBR250R (2011-), HONDA CBR250R (2011-)
Convenient
I put it on a NSR250R SE MC28, but the MC28 has a bagged Stem Nut, so I bought a Stem Nut for the MC21,
We intentionally installed it with holes. By attaching this product, the Multi Bar Holder can be attached, and the Smartphone Holder and USB power supply can be attached.
View detail
Frequency of use and cost-effectiveness.
It is a must for Sports type motorbike. I have a Camera fixed to it. View detail
Fits: HONDA CB250R, HONDA CB250R, HONDA CBR250R (2011-), HONDA CBR250R (2011-), HONDA CBR250RR (MC22), HONDA CBR250RR (MC22), HONDA CBR250RR (MC22), HONDA CBR250RR (MC22), HONDA CBR250RR (MC22), HONDA CBR400R (2013-), HONDA CBR600RR, HONDA CBR600RR, HONDA NSR250R, YAMAHA YZF-R25, HONDA CB300R, HONDA CBR500R, YAMAHA YZF-R3
Easy to use
[How is it used?
I bought it for Touring to install Smartphone Holder and USB power supply.
There are many Multi Bar Holders available, but we chose this one because of its simple shape and low price.
Was the one you received as per Image?
It is a short type, so it is quite compact.
Was the installation difficult?
Mount BoltQuantity of the same brand.:With Set, it takes only a few minutes.
Since the bolt is fixed in one position, it is necessary to visually check if the parallelism is correct and tighten the bolt, but that is about all you need to pay attention to.
How was your experience with it?
There is of course no problem to attach a phone mount and a USB power supply.
If you want to attach more than three items, you will need to adjust the position, etc., so it is better to think about what you will attach beforehand.
[Included Parts:were they on?
This product only.
Boltetc. is required separately for fixing.
[Was there anything that disappointed you?
Not particularly
【Review】
It is good to be able to do Mount at an affordable price.
You can choose from a variety of lineups, such as the fixing method and USB recharging, to suit your needs.
View detail
Fits: KAWASAKI Ninja ZX-25R SE KRT Edition, KAWASAKI Ninja ZX-25R SE, KAWASAKI Ninja ZX-25R, KAWASAKI Ninja ZX-4R SE
Can be installed on 2023MODEL
It was only labeled as compatible with conventional vehicles, but I was able to install it on the '23 MODEL without any problems. View detail