Reviews
Paint job is messy?
Matte paint nomenclature is present, but the overall texture of the paint is nowhere near as good.
The peeling paint on the Bolt is particularly disappointing.
Nevertheless, it is nice to be able to add Accent by using the Cap bolt collar, which is sold separately.
View detail
Fits: SUZUKI GSX-R750, SUZUKI GSX-R750, SUZUKI GSX-R750, SUZUKI GSX-R750, SUZUKI GSX-R600, SUZUKI GSX-R600, SUZUKI GSX-R1000, SUZUKI GSX-R600, SUZUKI GSX-R600, SUZUKI GSX-R600, SUZUKI GSX-R1000, SUZUKI GSX-R1000, SUZUKI GSX-R1000, SUZUKI GSX-R1000, KAWASAKI ZZR1400 (ZX-14), KAWASAKI ZZR1400 (ZX-14), KAWASAKI ZZR1400 (ZX-14), KAWASAKI ZZR1400 (ZX-14), KAWASAKI ZZR1400 (ZX-14), KAWASAKI ZZR1400 (ZX-14)
On Stem Mount
[How is it used?
GSX-R600 (K6) I purchased this product to install DAYTONA's Multi Bar on my
The compatibility list said that the model year was 2008 or later, but I measured the diameter on the actual vehicle and confirmed that there was no problem, so I chose this model.
Was the one you received as per Image?
I had bought other Sizes before, so it was as per Image.
How was your experience with it?
I confirmed beforehand that Size was fine, so of course I could use it.
Simply put it through the Mount on the Multi Bar, put it in the Stem Nut, and then tighten the Bolt.
Multi Bar could be fixed Firmly.
[Points to note]
It is recommended to measure the diameter of your motorcycle in advance as well as the fit.
How did it compare to other products?
I chose DAYTONA because it was troublesome to check the compatibility with Multi Bar or the hole diameter, etc.
Depending on the price, a cheap No Brand product would be fine.
【Review】
You can easily fix the Multi Bar to the Stem.
It is recommended to measure the inside diameter of your car's Stem to be sure.
View detail
Just the right height
I bought this to hold my Driveman in place. The height is just right so the image Angle can be taken well. View detail
Fits: HONDA CB250R, HONDA CB250R, HONDA CBR250R (2011-), HONDA CBR250R (2011-), HONDA CBR250RR (MC22), HONDA CBR250RR (MC22), HONDA CBR250RR (MC22), HONDA CBR250RR (MC22), HONDA CBR250RR (MC22), HONDA CBR400R (2013-), HONDA CBR600RR, HONDA CBR600RR, HONDA NSR250R, YAMAHA YZF-R25, HONDA CB300R, HONDA CBR500R, YAMAHA YZF-R3
SmallEngine Displacement VolumeParts that are helpful for cars!
[How is it used?
I bought it because there was no Space for Handlebar in the additional Meteretc. and it was difficult to install ActionCamera.
Was the one you received as per Image?
Although it is called "Small size", it looks like a large size for CD50.
Was the installation difficult?
Installation can be done with a single bolt.
I installed it on a MeterAdapter.
How was your experience with it?
I think it looks lumpy, but you can't beat the convenience.
The range during touring has been expanded.
[Included Parts:were they on?
Nothing else in particular.
[Was there anything that disappointed you?
Steel, so Wound will be noticeable.
It is inexpensive Parts, but it would have been nice if it had a more luxurious feel.
▼Various sizes are available in the Lineup, which is very nice because it can be used for different purposes.
View detail
Fits: HONDA NC750X, HONDA NC750X DCT, HONDA NC750X TypeLD, HONDA NC750X, HONDA NC750X, HONDA NC750X DCT, HONDA NC750X DCT, HONDA NC750X TypeLD, HONDA NC750X TypeLD DCT, HONDA NC750X TypeLD DCT
For smartphones!
I have seen many NC750X riders installing this screen mount bar. Most of them are using it for their smartphone, so I joined them. The work is quick and easy, and it takes more time to think about where to mount the phone. lol If you are using a smartphone vertically, a large type screen may be more suitable than a normal screen. View detail
Fits: SUZUKI GSX-R1000, HONDA CBR500R, SUZUKI GSX-R1000, HONDA VFR1200F DualClutchTransmission, HONDA VFR1200F DualClutchTransmission, HONDA NSR250R, HONDA CBR650R, HONDA CBR600RR, HONDA CBR400R, HONDA CBR400R (2013-), HONDA CBR250RR (MC22), HONDA CBR250RR (MC22), HONDA CBR250RR (MC22), HONDA CBR250RR (MC22), HONDA CBR250RR (MC22), HONDA CBR250R (2011-), HONDA CBR250R (2011-), HONDA CBR250R (2011-), HONDA CBR250R (2011-)
For fixing Multi Bar Holder
[How is it used?
I purchased a Multi Bar Holder for Touring to secure it to the Stem Mount.
TZr250R (3XV) I wondered if I should use another SizeSmallest one, but I found a blog where this one was installed, so I decided to use it as a reference.
Was the one you received as per Image?
It was just like the picture.
Was the installation difficult?
I think another SizeSmaller one would be better for TZr250R.
Since the vehicle is old, the inside of the stem is uneven due to rust, so it does not go in easily.
Finally, this product was scraped off with a sandpaper and then lightly tapped in with a plahan.
How was your experience with it?
It is perfect for use with the Multi Bar Holder.
There is no sign of loosening at all, and it is firmly fixed.
[Included Parts:were they on?
This product only.
[Was there anything that disappointed you?
I thought it would be nice if Bolt was Black as it is not a particularly treated item.
【Review】
Essential items for fixing the Multi Bar Holder to the Stem.
It is inexpensive and good for a variety of vehicles.
However, as mentioned above, I think that for the TZr250R, it is better to use a size up to φ17mm.
View detail
Fits: YAMAHA NMAX155, YAMAHA NMAX155, YAMAHA NMAX, YAMAHA NMAX
I am glad I bought it. It is long and can be installed in many ways.
[How is it used?
I installed this on a 2019 NMAX 155.
I have a small Mirror mount that I had on my motorcycle in the past, but I was interested in purchasing this product after seeing other motorcycles with this product installed.
Was the one you received as per Image?
As per Image
Was the installation difficult?
It is easy to remove and install OEMMirror.
The Instruction Manual is also minimal, but I could work by feel without looking at it.
After installing it, I thought that the bar comes surprisingly close to the front.
How was your experience with it?
I immediately attached the Smartphone Holder and the wide mounting location makes it very easy to adjust the location.
It is nice to be able to make fine adjustments, such as making it in front of you or shifting it slightly to the side.
Also, even with the Smartphone Holder installed, there is still plenty of room for a USB or HelmetHook.
This depends on the shape of the Smartphone Mount, but the one I have pops out quite far forward, so Navigation is not in view in my normal riding position.
Obviously, you have to move your eyes, so that is the only part that is a little difficult to see.
[Was there anything that disappointed you?
Nothing in particular, but I'm sure it will rust soon after being exposed to rain for a while.
View detail
Fits: KAWASAKI Ninja ZX-25R SE KRT Edition, KAWASAKI Ninja ZX-25R SE, KAWASAKI Ninja ZX-25R, KAWASAKI Ninja ZX-4R SE
I think it's a little too Large.
It's a must for anyone who uses a smart phone etc. nowadays.
We chose DAYTONA because we prefer something plain, but we don't like it if the construction is not well done.
The bolt cap was only available in Silver, so I replaced it with a Black cap later.
It is convenient and easy to use.
View detail
Fits: SUZUKI GSX-R750, SUZUKI GSX-R750, SUZUKI GSX-R750, SUZUKI GSX-R750, SUZUKI GSX-R600, SUZUKI GSX-R600, SUZUKI GSX-R1000, SUZUKI GSX-R600, SUZUKI GSX-R600, SUZUKI GSX-R600, SUZUKI GSX-R1000, SUZUKI GSX-R1000, SUZUKI GSX-R1000, SUZUKI GSX-R1000, KAWASAKI ZZR1400 (ZX-14), KAWASAKI ZZR1400 (ZX-14), KAWASAKI ZZR1400 (ZX-14), KAWASAKI ZZR1400 (ZX-14), KAWASAKI ZZR1400 (ZX-14), KAWASAKI ZZR1400 (ZX-14)
Mount kit is sold separately.
I bought it to use DAYTONA Multi Bar HolderShort.
After all, the diameter varies, so Quantity:You can't sell Set, can you?
There is a sense of double expense.
View detail
I am satisfied
It was easy to install.
I was concerned about the scratches on the new one, but other than that I am satisfied.
View detail
Fits: KAWASAKI Ninja ZX-25R SE KRT Edition, KAWASAKI Ninja ZX-25R SE, KAWASAKI Ninja ZX-25R, KAWASAKI Ninja ZX-4R SE
Convenient!
I think many people have trouble installing the Smartphone Holder on ZX-25R, but this is a recommendation. I changed the color of both SIDE to Gold by myself. View detail
Fits: HONDA VTR250, YAMAHA MT03, HONDA Forza300, HONDA CB500X, HONDA CB500F, HONDA CB150R, YAMAHA XSR900, YAMAHA MT-25, YAMAHA MT-09, SUZUKI Gixxer 150., SUZUKI Gixxer 250, SUZUKI DL1000 V-STROM250, HONDA HORNET250, HONDA FORZA Si, HONDA FORZA Si, HONDA JADE, HONDA glom, HONDA CROSSCUB110, HONDA APE 50, HONDA XR100MOTARD
NAKED has this
This is used for NAKED cars because it is convenient.
It was not compatible with NAKED, but can be attached to NAKED with Large body.
View detail
Fits: SUZUKI GSX-R750, SUZUKI GSX-R750, SUZUKI GSX-R750, SUZUKI GSX-R750, SUZUKI GSX-R600, SUZUKI GSX-R600, SUZUKI GSX-R1000, SUZUKI GSX-R600, SUZUKI GSX-R600, SUZUKI GSX-R600, SUZUKI GSX-R1000, SUZUKI GSX-R1000, SUZUKI GSX-R1000, SUZUKI GSX-R1000, KAWASAKI ZZR1400 (ZX-14), KAWASAKI ZZR1400 (ZX-14), KAWASAKI ZZR1400 (ZX-14), KAWASAKI ZZR1400 (ZX-14), KAWASAKI ZZR1400 (ZX-14), KAWASAKI ZZR1400 (ZX-14)
Easy to install! Anyone can do it!
It is very nice that it is easy and quick to install, but I think it is a little expensive. View detail
Good product overall.
It is not a Large problem because it is a simple structure, but the Quantity of Bracket:Pair (for Left and Right) There is no mention of the distinction between the two, and it is not in the Instruction Manual.
I have a 1/2 chance of getting it right, but I thought I could state that much.
View detail
Fits: HONDA CRF250RALLY S, HONDA CRF250RALLY, Others , HONDA CB1100 RS, HONDA CB125R, HONDA CB250R, HONDA CB250R, HONDA CB650R, HONDA CBR250RR(2017-), HONDA CT125, HONDA PCX125, HONDA PCX160, KAWASAKI Z1000 (water-cooled), KAWASAKI Z125 PRO, KAWASAKI NINJA2 Helmet50RSL, SUZUKI GSX-S1000F, YAMAHA MT-03 (2015-), YAMAHA MT-25, HONDA CB150R, HONDA CB300R
To install Drink holder.
This is an introduction to install a drink holder on a CB250R.
The height of the handlebar of CB250R is low, so a drink holder can be installed as it is.
When the Handlebar is cut, it contacts the Tank Cover.
For touring purposes, a drink holder is essential for me.
This product was used to gain height for installation.
I don't want to pinch Mirror.
We selected an item that can be attached to the Master CylinderClamp.
When installed in the proper orientation, it comes to the front unexpectedly.
Mounted in opposite directions to reduce pressure.
One drawback.
Why are Bolt, Washer and color Silver when BodyBlack?
Even though other similar products from DAYTONA use BlackBolt.
That is my only regret.
View detail
For OEMMirror
The mirror is secured by co-tightening, but since the hole for the mirror is 8mm, the hole needs to be enlarged by drilling if 10mm mirrors from other brand products are to be attached. View detail
Fits: HONDA Rebel500, HONDA Rebel250, HONDA Rebel1100, HONDA Rebel1100 DCT, HONDA Rebel300
It seems to hit on some types of cars.
It is likely to hit Tank depending on the type of car.
It would be better to operate in earnest after Fitting.
View detail
having good feel for quality
Black powder coating, decorative colors, etc., good finish and texture.
Personally, I would have preferred the price over the quality, as the 250SL itself is cheap, and a bit expensive.
According to the Instruction Manual, the top bridge is co-tightened, but in order to reduce the height, it was co-tightened on the handlebar clamp.
When attached to the bottom side, the distance between the Top Bridge and the bar is only about 16mm, so depending on the item, it may be necessary to pass the bar through the Top Bridge beforehand to install it.
Rigidity and fixation are not a problem.
View detail
After much deliberation, I decided to go with DAYTONA...
We had a hard time deciding which one to go with, but in the end we went with the Multi Bar made by DAYTONA.
The deciding factor was that the DAYTONA-made one has a bar that comes to the front.
The other company's meter is so close to the bar that it might be difficult to see the meter if a Smartphone Holder is attached....
I can't say for sure because I haven't tried the other company's product, but the price is about the same, and I chose the one that I didn't have any concerns about.
View detail
Fits: HONDA CBR600RR, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300 HAYABUSA, SUZUKI GSX-R1000
Quantity:Set.
For the first time, Multi Bar and Quantity:I think it is the purchase of Set.
Choose one that matches the vehicle body.
View detail