Reviews
Fits: HONDA CB250R, HONDA CB250R, HONDA CBR250R (2011-), HONDA CBR250R (2011-), HONDA CBR250RR (MC22), HONDA CBR250RR (MC22), HONDA CBR250RR (MC22), HONDA CBR250RR (MC22), HONDA CBR250RR (MC22), HONDA CBR400R (2013-), HONDA CBR600RR, HONDA CBR600RR, HONDA NSR250R, YAMAHA YZF-R25, HONDA CB300R, HONDA CBR500R, YAMAHA YZF-R3
It didn't come with just this.
This and the Mount Kit are required.
In total, I think the cosmetics are nowhere near as good as the Gold amount.
View detail
… It's subtle.
The dimensions, machining accuracy, and practicality are solid, but … to be honest. Parenthesis bad." It is. (Personal opinion.)
I mounted the clock etc. for now, but it is far from the Bridge-like Image of the Off car, to be honest. I'm fucked." The feeling is strong.
Mount bar for low-cost use." If you are looking for a good product, Camouflage may be a good product for you.
View detail
Made by stable DAYTONA
Easy to install, good material quality. View detail
Fits: HONDA VTR250, YAMAHA MT03, HONDA Forza300, HONDA CB500X, HONDA CB500F, HONDA CB150R, YAMAHA XSR900, YAMAHA MT-25, YAMAHA MT-09, SUZUKI Gixxer 150., SUZUKI Gixxer 250, SUZUKI DL1000 V-STROM250, HONDA HORNET250, HONDA FORZA Si, HONDA FORZA Si, HONDA JADE, HONDA glom, HONDA CROSSCUB110, HONDA APE 50, HONDA XR100MOTARD
Best position
[How is it used?
Used for Navigation and fixing your phone when touring.
Was the one you received as per Image?
As per Image.
Was the installation difficult?
You only need to remove the Screw and install it, so if you have Hexagonal Wrench, it's a piece of cake. However, be careful of the overtorque of Screw tightening.
How was your experience with it?
You can choose 2Pattern with the bar at the front or at the back in the direction of installation.
[Included Parts:were they on?
Included Parts:Bolt and collar are all that is needed for a complete installation.
[Was there anything that disappointed you?
The surface of the bar is soft. The surface of the bar is soft (?), so once you install it tightly, it will leave a mark.
If you are worried about it, you might want to wrap it around the anti-scratch Seat.
View detail
Fits: YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA YZF-R3
expensive
This is a normal Mount bar.
The downside is that it's expensive.
View detail
Fits: HONDA CB300R, HONDA CBR500R, HONDA NSR250R, HONDA CBR650R, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR400R (2013-), HONDA CBR250RR (MC22), HONDA CBR400R, HONDA CBR250RR (MC22), HONDA CBR250RR (MC22), HONDA CBR250RR (MC22), HONDA CBR250RR (MC22), HONDA CB250R, HONDA CBR250R (2011-), HONDA CBR250R (2011-), HONDA CB250R
Installed on CBR650R
Installed to put a Smartphone Mount on my CBR650R.
If you want to install this product on your CBR650R, you need to use two M16 washers on the bolt. (I'll give you a reference in the picture)
I've been using it for about four months now, and in terms of convenience, it's perfect!
Even with the phone mount, there is still a lot of space, so you can add USB or something else.
If I had to pick a demerit it would be that it looks a bit rugged, and I don't like the idea of having a protruding part on a sports bike lol.
But still, I can't beat the convenience and I've been using it for a long time, so it's really a Recommendation!
And it's cheap lol.
View detail
Fits: YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA YZF-R3
usually
It is a nondescript Mount bar.
It would be nice if it was a little cheaper.
View detail
Fits: YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA YZF-R3
A little high
This is a normal Mount bar.
I wish the price was a little lower.
View detail
Mostly good!
[How is it used?
Purchased for installation on a Minor vehicle rather than on a BirdCity
Also, I was going to make my own Bracket from the beginning, so "Ease of installation. has been omitted.
Was the one you received as per Image?
I don't have BirdCity, so it's a mystery to me whether it's the same as the Image from BirdCityUser's point of view.
Was the installation difficult?
Because Mirror hall was far away, I made a wide bracket for Bird City and a wider bracket.
Other than that, there are no other special difficulties. I just envy those who have a car model specific product.
How was your experience with it?
It was installed securely without any strange wobbles.
[Included Parts:were they on?
Pipe and Bracket Only.
[Was there anything that disappointed you?
I've used it before on other vehicles, so it's what I expected. It didn't exceed my expectations.
View detail
Fits: HONDA CB300R, HONDA CBR500R, HONDA NSR250R, HONDA CBR650R, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR400R (2013-), HONDA CBR250RR (MC22), HONDA CBR400R, HONDA CBR250RR (MC22), HONDA CBR250RR (MC22), HONDA CBR250RR (MC22), HONDA CBR250RR (MC22), HONDA CB250R, HONDA CBR250R (2011-), HONDA CBR250R (2011-), HONDA CB250R
I think it's something like this
I have purchased the Multi Bar Holder
I don't know how long the paint will last, as it hasn't actually been in use
As for installation, the bar itself is described in the Construction Manual in terms of the number of pies We do not
It would be helpful if you could describe it
Especially since it's a complete DAYTONA and I'm sure you'll be installing it a lot!
View detail
Fits: HONDA VTR250, HONDA FTR223, HONDA FTR223, HONDA CB650R, HONDA CB400SS, HONDA CB223S, HONDA 400X, HONDA CB150R, HONDA CB300R, HONDA CB500F, HONDA CB500X, HONDA Rebel300, YAMAHA MT03, YAMAHA NMAX155, YAMAHA XSR900, YAMAHA MT-25, YAMAHA NMAX, YAMAHA MT-07, YAMAHA MT-09, HONDA MAGNA(V-TWIN MAGNA)
Good shape and cost
I haven't installed it yet, but it was arranged early The shape and cost surface was OK I would like to install it View detail
Fits: HONDA Forza300, YAMAHA MAJESTYS, YAMAHA MAJESTYS, YAMAHA MAJESTYS, YAMAHA MAJESTYS, YAMAHA BWS125(BWS), HONDA FORZA(MF10), HONDA FORZA Si, HONDA glom, HONDA PCX150, HONDA PCX150, HONDA PCX125, HONDA PCX125, HONDA PCX125
Is it too expensive?
Big scooter type? I bought the MAJESTYS of the MAJESTYS and I bought it I'm not particularly useful at this point because I'm not a fan of attaching my phone etc. to my motorcycle However, it is good for the dress-up feeling and for improving the rigidity of the handlebar area However, I think the price is too high for the product I feel that 3,500 yen is high for a simple iron bar It would be nice if this was a lightweight AluminumMaterial etc I think that the stiffness around the Handlebar will be different between just attaching and not attaching It's one of the parts that I'd like to wear View detail
Fits: SUZUKI GSX-R1000, SUZUKI GSX-R1000R
It is not necessary to be honest as it is
Subsumaho Mount for BackMonitor that was attached to the bar with a slight gap of Separate handle
I purchased it because I was trying to manage it because the position was bad.
HandlebarCenter has Mount of Main, so it interfered and it was not possible to install.
I thought that it would come a little more if I looked at the introduction image.
I tried to remove the Mount of Main and installed it, but it looks like a baluster and it was kind of bad.
After trial and error, we cut the bar, processed it, and put it on the side of Left and worn it.
I think that this is exactly good.
Although it is a story about the position after machining, I am satisfied that I could just put it in a good position.
I think that a T-shaped bar to attach to the Center hole is enough to buy this.
View detail
Fits: YAMAHA NMAX, YAMAHA MT-07, YAMAHA NMAX155, YAMAHA NMAX155
The convenience is convenient, but ...
Perhaps this type has its presence even if it is installed anywhere, but it is hard to get out of Cap, because WaterproofRubber in Cap is pasted in Seal, so if you try to make a cable, it is hard to make a little or a little making I feel it?. View detail
Fits: SUZUKI GSX1300 HAYABUSA, YAMAHA MT-07
Breakthrough in Separate handle
Because the navigation was not attached as usual GRAND DINK 125 in Touring of the other day,
I thought it was a bit inconvenient, and I tried attaching this thing that I was considering from a long time ago.
It's very easy to install and just replace the holders on the Brake holder,
(When attached to VFR 400R, the attached Bolt is too long, use OEM)
You can install it in about 5 minutes of things. To prevent the Wiring from interfering with the Handlebar,
Fix it with Tying Band, take along side Cowl to Tank side, finish.
I think this is enough,
Taking it to the Frame side makes it very hot, so I think I need attention.
Also, Wiring to be attached to the attached Battery side,
It is the same as the one of 95027 Charger of the same Brand purchased at the same time,
I can use it for other vehicles, I feel like I gained.
It is a letter if it works without any problem.
View detail
Fits: Others , HONDA PCX160, HONDA PCX125, HONDA CRF250RALLY S, HONDA CRF250RALLY, HONDA CB650R, YAMAHA MT-09, SUZUKI V STROM 1050, SUZUKI V STROM 650
In the attached curler, the outer diameter is thick and can not be installed.
Purchased to attach to ZZr 1200 and fix Smartphone Holder made by DAYTONA.
When Clutch master fixed Bolt is removed and the curler is matched, the outer diameter is 1 mm Large and it can not be installed. It can not be installed on ZrX 1200S for the same reason.
It is Large strange to find this curler. Would it be perfect if you included 4 pieces with thin curlers if possible.
Separate handle of ZZr 1200 requires 4 longer curlers to secure Clearance.
Since ZrX is Pipe handle, it seems there is no problem with Clearance.
It is not recommended for the above two models. By the way, I remember that the attached curler outer diameter is 11 mm.
View detail
Fits: HONDA CB250R, HONDA CB250R, HONDA CBR250R (2011-), HONDA CBR250R (2011-), HONDA CBR250RR (MC22), HONDA CBR250RR (MC22), HONDA CBR250RR (MC22), HONDA CBR250RR (MC22), HONDA CBR250RR (MC22), HONDA CBR400R (2013-), HONDA CBR600RR, HONDA CBR600RR, HONDA NSR250R, YAMAHA YZF-R25, HONDA CB300R, HONDA CBR500R, YAMAHA YZF-R3
To CameraMount
We are using it together with the company's Stem Center Bolt
I am wearing it for taking moving pictures with Circuit
Handlebar will be messed around
This product that is high is necessary because we need a little height to put Meter and the scenery of the front at the same time in the camera
I think that if you improve the shape of Bracket so that it can also be mounted on Center, it will be better
View detail
Fits: HONDA CBR250RR (MC22), HONDA CBR250RR (MC22), HONDA CBR250RR (MC22), HONDA CBR250RR (MC22), HONDA CBR250RR (MC22), HONDA CBR500R, HONDA CB300R, HONDA CBR400R (2013-), HONDA CBR400R, HONDA CBR250R (2011-), HONDA CBR250R (2011-), HONDA CB250R, HONDA CB250R, SUZUKI GSX1300 HAYABUSA, HONDA NSR250R, HONDA CBR650R, HONDA CBR600RR, HONDA CBR600RR
Silver is rusty so let's buy Black
【What made you decide the purchase?】
As Type attached to Stem Bar type is only Col
【How was it actually used?】
Quantity the U character base of RAMmounts : 2pc. We are mounting Set Used Car Camera and Navigation
【Mounting was difficult?】
Just install the optional DAYTONA Mount Kit and just install and tighten it is an easy task
【Please tell me the installation point and hang】
Mount Kit and Multi Bar Body (Silver) We strongly recommend that we treat rust prevention
[Is there anything I was disappointed about?]
This time I bought Silver, but it ruins very easily
It rained in two days after installation and it rusted on the third day
【Hope for Manufacturer - Please let me know if you have any improvement points]
As an attachment to the rain seductive motorcycle it is not convincing for this easy rusting
【Have you compared items?】
RAMmounts StemBase
[Others]
I barely wear a Carbon Style Cutting Sheet that I was rolling at home as I have difficulty watching after blowing a rust prevention Spray
View detail
Fits: YAMAHA MAJESTYS, YAMAHA MT-25, YAMAHA XSR900, YAMAHA MT-09, SUZUKI GSX250R, SUZUKI GSX250R, HONDA HORNET250, SUZUKI GSX250R, HONDA FORZA Si, HONDA FORZA Si, HONDA JADE, HONDA glom, HONDA VTR250, HONDA XR100MOTARD, HONDA PCX160, HONDA VTR250, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SUPER BOLDOR
I am useful.
I bought it to install Smartphone. Installation is BoltQuantity : It is easy because it is only 2 pc. Cost performance is also good. View detail
Fits: HONDA CBR250RR (MC22), HONDA CBR250RR (MC22), HONDA CBR250RR (MC22), HONDA CBR250RR (MC22), HONDA CBR250RR (MC22), HONDA CBR500R, HONDA CB300R, HONDA CBR400R (2013-), HONDA CBR400R, HONDA CBR250R (2011-), HONDA CBR250R (2011-), HONDA CB250R, HONDA CB250R, SUZUKI GSX1300 HAYABUSA, HONDA NSR250R, HONDA CBR650R, HONDA CBR600RR, HONDA CBR600RR
GSX-1300R -- a GSX1300R HAYABUSA -- attaching to 2005 models -- DAYTONA Multi bar holder Stainless-clamp DAYTONA Mount-kit phi13-14NANKAI KANI Series Flexible-clamp WNANKAI.KANI Series Four more than SMART Phone Porch AN PB-20
GSX-1300R -- a GSX1300R HAYABUSA -- attaching to 2005 models --
DAYTONA Multi bar holder Stainless-clamp
DAYTONA Mount-kit phi13-14
NANKAI KANI Series Flexible-clamp W
NANKAI.KANI Series Four more than SMART Phone Porch AN PB-20
are combined.Although it checked that it was written clearly that the bar holder and a Mount kit are correspondence vehicle types and being purchased, a problem is revealed after starting the attachment after thing arrival.
If it attaches in the regular direction, the bar itself does not have a problem, but the direction of a smart phone Porch interferes in a Tank bag ....A belly will be choked, if a Tank bag is shifted to the sheet side since it is unavoidable ....Since it was able to equip with it somehow when it found out whether 180 degrees of direction of the
bar would be changed, and it would reach, it was made such.However, since it goes into the back exactly and fixation is not carried out, it is due to reinforce with Weir etc.
View detail