Reviews
Smartphone Folder to be expected to be durable in the future.
I had heard that attaching a smartphone to a motorcycle would damage the camera's autofocus, so I did not install one even after purchasing a motorcycle. However, recently I have been touring more and riding on unfamiliar roads, so I decided to install a folder. It is easy to install and holds the phone firmly. The parts that are subject to force are made of aluminum parts, and the durability of the Folder itself seems to be promising. I installed it on the Left Side of the Handlebar, but since the eye movement while driving is Large, it would be safer to put it in the Center. Whether this product is really good or not depends on how long it will protect my phone. View detail
Holder's clattering sound is gone.
[How is it used?
I bought this product additionally because I was told that iPhone breaks Camera by vibration.
Was the one you received as per Image?
It was larger than I expected.
How was your experience with it?
I am not sure if the vibration of the phone itself is reduced and the Camera is protected, but the Smartphone Holder itself used to make a rattling sound, but that sound has disappeared, so I think the vibration is absorbed.
[Points to note]
The mounting position needs to be adjusted as it increases the bulk considerably.
How did it compare to other products?
I wanted to use DAYTONA's Smartphone Holder, so I didn't compare it to other products.
View detail
I lost it, so...
22.I lost my ClampSpacer for 2mm, so I bought Repair Parts.
Only Repair Parts can be purchased for fragile parts, so they can be used for a long time.
View detail
Modern necessities
I think Attachment is necessary in today's smartphone-essential world.
The clamp part is solid, so it seems unlikely to fall off while driving, but I am just a little worried about it digging into the Handlebar and scratching it.
It can be securely fastened to the Body even while still in the Smartphone Case.
There is also a locking mechanism so it won't rattle while driving, and it has an insurance band to prevent it from falling.
However, be careful not to use this band in the wrong position, as it can manipulate the volume button.
Vertical and horizontal rotation is also easy, but it is excellent because it does not turn on its own while driving.
It looks like you can choose with or without vibration control components, but I wondered … if it makes sense to go without.
They say that without vibration-damping components, the anti-shake function of the phone often breaks down! (According to a friend)
I decided to install it in the middle for visibility of the meter, but I think it would be better to install it a little closer to the left.
I will try various trial and error.
View detail
Fits: YAMAHA MAJESTYS, YAMAHA Majesty S
It worked on my iPhone 15Pro.
[How is it used?
I was considering a Smartphone Holder to view Navigation on my BMW R100 Twin suspension.
Was the one you received as per Image?
It is easy to install and use, with One-touch to fix and remove the phone. It is intuitive and could be used without Stress.
Was the installation difficult?
Wiring around the Handlebar may be Large strange. The only thing to do is to wrap the included rubber parts around the handlebar, and then hook and fix it with a bracket.
I used DoctorRubber's Handlebar Grip Rubber as an anti-vibration measure. We recommend it as well!
https://www.webike.net/sd/25949395/
How was your experience with it?
It is easy to install and use, with One-touch to fix and remove the phone. It is intuitive and could be used without Stress.
To remove the phone, pull the red lever in front of the reverse side toward you.:Pair (for Left and Right) The claws of the "I" release.
[Included Parts:were they on?
All Included Parts:required for installation are provided.
View detail
It slips and moves.
Used to attach the Smartphone Holder to the Pipe behind the Screen on the Honda 400X (2019) (with an additional Spacer that comes with the Smartphone Holder).
The size itself is just right, but the hard rubber makes it slippery, and even when the bolt is tightly tightened, it slips and moves. Therefore, I wrapped a thin double-sided tape around the pipe on the body side before installing the bolt, but it is not completely fixed because the outer side of the bolt also slides.
I'm considering replacing the Arm of the Holder with an aluminum spacer only for the type that is tightened with ZETA Bolt.
View detail
Higher height.
I bought this when the Autofocus on my previous iPhone 11Pro Camera broke.
Type VibrationControlDevice to be attached to existing Smartphone Holder3
Just Smartphone Holder3+ IH2100Rigid (25077) The pull-pull mechanism is about 20mm higher than that of the "M" and it shakes more when a smartphone is attached.
I think it can absorb a certain amount of vibration, but the increased height makes it look bad.
If I were to purchase an expensive SMARTMonitoretc. without a phone attached, I would be willing to purchase a used Android phone and use it with TetherRing.
View detail
Slightly unstable
From a friend when I got a new phone.
You should definitely get one because the Camera's Autofocus feature is so fragile!" I bought it after being advised to do so!
The stability is a little worse than before, so I'm a little worried.
It's better than worrying that the Camera might break.
I don't know how well it works yet, but I'm glad I bought it because it doesn't seem to have any problems!
View detail
I'm glad I sold it.
While transferring DAYTONA's Smartphone Holder from MONKEY to ZZr, I accidentally lost this product that I purchased this time and was about to give up using the Smartphone Holder itself when I went to Webig to see if they sold Rose! I was about to give up using the Smartphone Holder itself when I went to Webig to see if they had any Rose products for sale. Thanks a lot. View detail
Mounted on SRX
[How is it used?
For smartphones as Navigation for Touring.
Was the one you received as per Image?
Large swing from DAYTONABrand's Miknowla's.
How was your experience with it?
There is no space for mounting on the handlebar, so I use it horizontally by fixing it to the Stem Nut. I have no problem with charging with the TORQUEG06.
[Points to note]
Arm retention is solid, but the handlebar mounting and ArmBase are separate and there was a little rattling here, so I inserted a piece of sponge tape between them.
How did it compare to other products?
This is a replacement for the one from Miknowla, which is no longer available due to the smartphone's Large type, but it is a bit lumpy. It is a little bit tough, but I think that is why the fixation is so firm.
View detail
Easy to use and safe
I installed on honda Hornet 250.Looking good design & easy to fixing.As a fixing tool Allen key will along with catalog. Depending on handle size there are rubber gland (for clamp mount)along with parts.can be turn and adjusted vertical or horizontal . The clamp mount will fitted firmly to handle."dyatoma made in Japan " printed on camp . I'm using 165.3 x 76.8 x 10.1 mm phone.tightly clamp to the phone,little hard to put on ,but can be adjusted as a phone size.phone mount corner clamps are protected with sponge pad for avoid phone scratches. There are 2 white rubber band hang on with phone bracket, it's for put in your phone for safety.(avoid falling down) I will Recommended this for motorcycle enthusiast. View detail
Fixing stiffer than previous product
I had used the previous product, but this new product looks more luxurious, and the locking mechanism is quite good with easy detachment of the phone. It seems a little hard, but I think it will become less of a concern after a few more uses. View detail
I am satisfied
Installation is quick and easy, and there is no fear of falling off even with the shaking of the Motorcycle.
The design is clean and satisfactory.
View detail
It's hard to tell the effect, but is there...?
[How is it used?
I bought this one because my iPhone Camera had broken in the past.
Was the one you received as per Image?
It looks exactly as it should and was easy to install with no problems.
How was your experience with it?
After actually using it, I honestly do not know if the vibration is reduced.
Since it is a 250cc single cylinder Motorcycle, there is a certain amount of vibration and the phone vibrates slightly.
However, I am satisfied with the use of the Camera on my phone without any breakage.
[Points to note]
After all, this Device pinching makes the phone seem to pop out more than expected.
The Mount is somewhat noticeable, but I can't go far without a map on my phone, so I guess it can't be helped.
View detail
Fits: YAMAHA MAJESTYS, YAMAHA Majesty S
Match for American motorcycle!
Installed on Shovel 1977.
I thought that Smartphone Holder on American motorcycle is not basic MATCH,
We chose this product because we felt it was absolutely necessary when touring.
Since the Clamp portion is Silver, we feel that it is a good visual match with the Handlebar.
Overall texture is good.
However, since the holder part is plastic, I think it might break off due to UV rays and age-related deterioration if the motorcycle is parked in the blue sky.
A Hexagonal Wrench is also included for installation without tools.
It also has a Band to prevent falling.
I think the question now is how long it will last with Shovel's Engine heartbeat.
View detail
Fits: YAMAHA MAJESTYS, YAMAHA Majesty S
There are many different types now.
Compared to 10 years ago, there are now many more tools available from various companies to mount a Smartphone on a car body in various forms. With the ever-evolving and ever-evolving convenience, it is stressful to think about which one is best suited for you.
In my case, I have limited opportunities to mount my Smartphone on my motorcycle to view maps etc., so I can detach it when necessary without the need for tools, and if the holding power of the Smartphone itself is at about the 75th level, I am OK with it. I don't feel the need to install a RubberDamper or something else for vibration resistance.
This product from DAYTONA is an OEM of Miknowla, a long-established manufacturer of for Motorcycle smartphone mounts, and at one time it was such a standard product that there was no need to choose any other smartphone mount.
I still feel that this ease of installation and low price still works well in the field. I usually use it as if I threw it under the Seat and take it out and install it when I need it.
View detail
Fits: YAMAHA Tricity155, YAMAHA MT03, YAMAHA BirdCity, YAMAHA MAJESTYS, YAMAHA MT-25, YAMAHA MT-03 (2015-), SUZUKI GSX-R125, KAWASAKI Z125 PRO
It's a great cosmetic
I was satisfied with LargeChange. It is a cosmetically pleasing and easy to use product. View detail
Steady making
I used to use DAYTONA's soft case type, but I bought this open type product because the heat was trapped in the case and it became abnormally hot, and the reflection of light on the vinyl surface made it difficult to see the screen. The vibration absorption is effective and there is no screen shake, so it is comfortable. View detail
Hold feeling is perfect.
I bought it because it looked sturdy.
It is expected to last for a long time, as the Size can be matched even if the phone is switched.
Clamp the clamp to the handlebars etc. Cushion material is included in the package so that it can be installed without damaging the clamp (not tested since it has not been removed after installation).
Since the tilt can be adjusted, the orientation of the phone can be kept horizontal even when attached to the slanted part of the Handlebar.
Pull the claw part of the holder to open the opening, and fit the phone into it. When I first purchased this product, I often had trouble pulling the claw, so I blew on Bell Hammer and was able to open and close it very smoothly.
The phone fixation itself is very stable and not lacking. Elastic bandQuantity, the auxiliary holding:The 2pc hangs in the perfect spot on the phone screen and is a little obtrusive.
If you don't trust holders, you can attach the popular Strap holder to your smartphone and attach the Strap to a handlebaret or the like for even more security.
Those who do not need wireless charging will be highly satisfied with this product.
I wanted wireless charging, so I purchased another wireless charger, also from Daytona, and installed it in this Holder. The combination was so bad that I could not believe that they are from the same brand, and I managed to attach them by my own work. If you want wireless charging, I recommend you to buy this Holder with wireless charger of the same series from the beginning.
View detail
For iPhoneUser
My phone is an iPhoneXR and I've been getting more reports lately. "Motorcycle vibration causes Camera's Autofocus to malfunction." This has happened twice.
This time we learned that a vibration suppressor was on the market.
It can be attached in combination with DAYTONA's Smartphone HolderWIDE, which was originally attached, so I put it between the two.
It has only been installed for a few days so the effect is unknown.
I've installed it for now and we'll see how it goes, but I hope Camera's Autofocus doesn't fail.
View detail