Reviews
Smartphone Folder to be expected to be durable in the future.
I had heard that attaching a smartphone to a motorcycle would damage the camera's autofocus, so I did not install one even after purchasing a motorcycle. However, recently I have been touring more and riding on unfamiliar roads, so I decided to install a folder. It is easy to install and holds the phone firmly. The parts that are subject to force are made of aluminum parts, and the durability of the Folder itself seems to be promising. I installed it on the Left Side of the Handlebar, but since the eye movement while driving is Large, it would be safer to put it in the Center. Whether this product is really good or not depends on how long it will protect my phone. View detail
Holder's clattering sound is gone.
[How is it used?
I bought this product additionally because I was told that iPhone breaks Camera by vibration.
Was the one you received as per Image?
It was larger than I expected.
How was your experience with it?
I am not sure if the vibration of the phone itself is reduced and the Camera is protected, but the Smartphone Holder itself used to make a rattling sound, but that sound has disappeared, so I think the vibration is absorbed.
[Points to note]
The mounting position needs to be adjusted as it increases the bulk considerably.
How did it compare to other products?
I wanted to use DAYTONA's Smartphone Holder, so I didn't compare it to other products.
View detail
Slightly unstable
From a friend when I got a new phone.
You should definitely get one because the Camera's Autofocus feature is so fragile!" I bought it after being advised to do so!
The stability is a little worse than before, so I'm a little worried.
It's better than worrying that the Camera might break.
I don't know how well it works yet, but I'm glad I bought it because it doesn't seem to have any problems!
View detail
Mounted on SRX
[How is it used?
For smartphones as Navigation for Touring.
Was the one you received as per Image?
Large swing from DAYTONABrand's Miknowla's.
How was your experience with it?
There is no space for mounting on the handlebar, so I use it horizontally by fixing it to the Stem Nut. I have no problem with charging with the TORQUEG06.
[Points to note]
Arm retention is solid, but the handlebar mounting and ArmBase are separate and there was a little rattling here, so I inserted a piece of sponge tape between them.
How did it compare to other products?
This is a replacement for the one from Miknowla, which is no longer available due to the smartphone's Large type, but it is a bit lumpy. It is a little bit tough, but I think that is why the fixation is so firm.
View detail
Easy to use and safe
I installed on honda Hornet 250.Looking good design & easy to fixing.As a fixing tool Allen key will along with catalog. Depending on handle size there are rubber gland (for clamp mount)along with parts.can be turn and adjusted vertical or horizontal . The clamp mount will fitted firmly to handle."dyatoma made in Japan " printed on camp . I'm using 165.3 x 76.8 x 10.1 mm phone.tightly clamp to the phone,little hard to put on ,but can be adjusted as a phone size.phone mount corner clamps are protected with sponge pad for avoid phone scratches. There are 2 white rubber band hang on with phone bracket, it's for put in your phone for safety.(avoid falling down) I will Recommended this for motorcycle enthusiast. View detail
Fixing stiffer than previous product
I had used the previous product, but this new product looks more luxurious, and the locking mechanism is quite good with easy detachment of the phone. It seems a little hard, but I think it will become less of a concern after a few more uses. View detail
It's hard to tell the effect, but is there...?
[How is it used?
I bought this one because my iPhone Camera had broken in the past.
Was the one you received as per Image?
It looks exactly as it should and was easy to install with no problems.
How was your experience with it?
After actually using it, I honestly do not know if the vibration is reduced.
Since it is a 250cc single cylinder Motorcycle, there is a certain amount of vibration and the phone vibrates slightly.
However, I am satisfied with the use of the Camera on my phone without any breakage.
[Points to note]
After all, this Device pinching makes the phone seem to pop out more than expected.
The Mount is somewhat noticeable, but I can't go far without a map on my phone, so I guess it can't be helped.
View detail
Fits: YAMAHA MAJESTYS, YAMAHA Majesty S
There are many different types now.
Compared to 10 years ago, there are now many more tools available from various companies to mount a Smartphone on a car body in various forms. With the ever-evolving and ever-evolving convenience, it is stressful to think about which one is best suited for you.
In my case, I have limited opportunities to mount my Smartphone on my motorcycle to view maps etc., so I can detach it when necessary without the need for tools, and if the holding power of the Smartphone itself is at about the 75th level, I am OK with it. I don't feel the need to install a RubberDamper or something else for vibration resistance.
This product from DAYTONA is an OEM of Miknowla, a long-established manufacturer of for Motorcycle smartphone mounts, and at one time it was such a standard product that there was no need to choose any other smartphone mount.
I still feel that this ease of installation and low price still works well in the field. I usually use it as if I threw it under the Seat and take it out and install it when I need it.
View detail
Steady making
I used to use DAYTONA's soft case type, but I bought this open type product because the heat was trapped in the case and it became abnormally hot, and the reflection of light on the vinyl surface made it difficult to see the screen. The vibration absorption is effective and there is no screen shake, so it is comfortable. View detail
Hold feeling is perfect.
I bought it because it looked sturdy.
It is expected to last for a long time, as the Size can be matched even if the phone is switched.
Clamp the clamp to the handlebars etc. Cushion material is included in the package so that it can be installed without damaging the clamp (not tested since it has not been removed after installation).
Since the tilt can be adjusted, the orientation of the phone can be kept horizontal even when attached to the slanted part of the Handlebar.
Pull the claw part of the holder to open the opening, and fit the phone into it. When I first purchased this product, I often had trouble pulling the claw, so I blew on Bell Hammer and was able to open and close it very smoothly.
The phone fixation itself is very stable and not lacking. Elastic bandQuantity, the auxiliary holding:The 2pc hangs in the perfect spot on the phone screen and is a little obtrusive.
If you don't trust holders, you can attach the popular Strap holder to your smartphone and attach the Strap to a handlebaret or the like for even more security.
Those who do not need wireless charging will be highly satisfied with this product.
I wanted wireless charging, so I purchased another wireless charger, also from Daytona, and installed it in this Holder. The combination was so bad that I could not believe that they are from the same brand, and I managed to attach them by my own work. If you want wireless charging, I recommend you to buy this Holder with wireless charger of the same series from the beginning.
View detail
For iPhoneUser
My phone is an iPhoneXR and I've been getting more reports lately. "Motorcycle vibration causes Camera's Autofocus to malfunction." This has happened twice.
This time we learned that a vibration suppressor was on the market.
It can be attached in combination with DAYTONA's Smartphone HolderWIDE, which was originally attached, so I put it between the two.
It has only been installed for a few days so the effect is unknown.
I've installed it for now and we'll see how it goes, but I hope Camera's Autofocus doesn't fail.
View detail
hard to take
Until now, I have been using DAYTONA's Smartphone HolderWIDE.
It was possible to install the Smartphone Holder 3 even if a smartphone with a large size or a smartphone cover was attached, but it sometimes came off and the smartphone fell off. I changed to this Smartphone Holder3 which can be fixed only by holding down the SIDE of the phone.
Also, since my phone is an iPhone, I chose this product with a vibration suppressor because I have had the Camera's Autofocus fail twice due to Motorcycle vibrations.
View detail
Fits: YAMAHA BirdCity, YAMAHA MAJESTYS, YAMAHA MT-03 (2015-), YAMAHA MT-25, YAMAHA MT03, YAMAHA Tricity155
Reliable DAYTONA products!
[How is it used?
I had a bad experience with the iPhone Camera in the past, so I was not a fan of the Smartphone Mount.
We purchased it together with this one, which can reduce vibration.
https://www.webike.net/sd/24965609/
Was the one you received as per Image?
We have used it before and found it as convenient and easy to use as ever.
Installation was easy with no problems.
I was impressed because the mount method is more advanced than the one I used before and the mount itself is harder to steal.
How was your experience with it?
It works fine
Mount is also easy because you just put your phone on it and pinch it.
[Points to note]
When I utilized it before, the SIDE Arm opening became more and more reluctant, so I am somewhat concerned about where that will come from in this one.
View detail
Mounting part
When turning the hexagon of the VCS part and the swiveling crank part, the bolt below rotates and is difficult to tighten.
It is difficult to tighten unless while holding the lower nut portion.
As for the rest, there seems to be no problem.
The fixing part is firm and there seems to be no worry about the phone falling out.
Silicon band is also included as an insurance policy, but it makes it difficult to operate the screen when used, but I guess it is an unavoidable structure to prevent it from falling off.
If you are considering dropping damage and repair costs for an expensive phone, this is a safe bet to fix it.
View detail
moving part
Was the one you received as per Image?
I was looking for something with a small rear area for cooling, and this was just what I wanted.
Was the installation difficult?
No problems, solid.
How was your experience with it?
The rotating mechanism seems to be a selling point, but it does not lock, so it rotates during installation and removal, so I gave it a minus 1 star.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
To prevent phone damage
There are many occasions when I use Navigation on my smartphone when I go to an unfamiliar place, but I decided to purchase this product because I wanted to prevent damage to my smartphone to some extent, and I wanted to do so within an easy range. I decided to purchase this product because it is relatively inexpensive and has favorable impressions. The fact that the base and length adjustment arm are made of gold gives me a sense of security, and the easy operation of attaching and detaching the phone makes it convenient to use.
The only thing is that the Parts at the tip of the Arm that holds the phone are Material:Since it is made of plastic, I thought it would be better to have some kind of support to prevent it from falling. With this, in case Material:It seems to me that even if the Plastic part is damaged, it would inhibit the phone from falling to the ground.
I felt that it would be more secure if the holding part of the Arm tip was also made of Gold genus, even if the price was slightly higher.
View detail
Mounted on X-MAX
I purchased this product with the claim of vibration reduction. Easy to install and good design. I haven't had any problems so far with my phone breaking. It is easy to use. View detail
Fits: YAMAHA Tricity155, YAMAHA MT03, YAMAHA BirdCity, YAMAHA MAJESTYS, YAMAHA MT-25, YAMAHA MT-03 (2015-), SUZUKI GSX-R125, KAWASAKI Z125 PRO
It is a good item
Another motorcycle was a rigid type, but this time we installed this slightly less expensive product. The installation was completed in about 10 minutes and I am able to use it without any problems. I thought it would be better if the angle of the carrying surface could be changed to Up downwards. View detail
I can lock it down tight.
The make is Well.
The Spring of the claw that pinches it is also quite strong, and once locked, it did not fall off.
Thick Smartphone cases (round shape, approx. 15mm thick) can be inserted without any problem.
The body can be rotated and used either vertically or horizontally, but right-rotation is recommended when rotating the body.
If you use Left rotation a lot, the screws that hold the body in place will loosen. You may notice that the screws are rattling to a certain degree, so you should retighten them periodically even if you do not rotate the body.
We recommend using the included Silicon band as an insurance policy.
View detail
Easy to use
Installed on CT125. I bought the vibration-proof type because I heard that vibration causes Camera to malfunction. I think the vibration of the Motorcycle is transmitted to my phone while driving, but … I will check the effect from now on. View detail