Reviews
It is an absolute effect
Used for PASSOL, introduced because of great vibration even at 30 km/h. It is clear that fine vibration is reduced. If the price is a little lower, I think it can be used for other motorcycles. View detail
Initial installation is hard and a little troublesome.
I bought it for Touring because it is a shock absorbing Damper.
The anti-drop gels attached to the nut were so hard that I was worried that the Wrench would slide down the nut and lose the mountain, but I was able to install it without any problems.
As for the feeling of use, I felt that the vibration when touching the phone was reduced compared to the vibration of the Handlebar part both during Idling and driving.
I don't know yet how effective it actually is, but I am glad I bought it for the price.
View detail
Easy installation
[How is it used?
Installed on a 2021 400X.
Was the one you received as per Image?
Yes
Was the installation difficult?
Easy to install.
How was your experience with it?
I just installed it and haven't driven it yet, but it seems to absorb vibration.
[Included Parts:were they on?
It was there.
[Was there anything that disappointed you?
None
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Buffered?
I have been waiting for this product to be released because I have often heard information that the vibration of the phone breaks the Camera function.
The overall thickness of the Holder increases by about 40mm, so it is not a good idea if you are concerned about appearance.
Before I installed it, it didn't seem to vibrate, but once it was installed, it was clearly visible that it was shaking.
Am I correct in assuming that this softens the impact of vibration from the Motorcycle?
Installation is not possible with the Clamp attached to the car body.
The Spanner will not fit in the Nut side, so once the angle is set, the Body must be fixed by hand and the Bolt side tightened.
View detail
Fits: YAMAHA BirdCity, YAMAHA MAJESTYS, YAMAHA MT-03 (2015-), YAMAHA MT-25, YAMAHA MT03, YAMAHA Tricity155
Very durable and easy to use
I have used many kinds of SMART phone holders in the past, but this SMART phone holder is the easiest to use and the most durable. I have been using it every time I go touring for 2.5 years now and it has not broken down at all. It's a great product! I recommend it. View detail
How to capture the 45mm?
It was delivered earlier than the original delivery schedule, so I was able to install it immediately.
When I put it together, my first thought was. You're getting bigger. … You can feel the size even more when you wear it.
So, if you touch the holder part of the phone by this device, it will be wobbly. "Large, is it strong? However, when I ran the engine, I found that the holder part was It's damped. I was able to realize that I had a lot to learn.
However, it's not a problem. With this device installed, the height will be about 45mm.
My car is equipped with a Handlebar and Handlebar Brace made by Takekawa for Grom. It's not easy to put it in there, and it's not easy to put it on the Brace, so I decided to take it off and see what happens.
As for the function of this device, at least vibration control is functioning, so there is no problem with the product.
However, it may not be suitable for some vehicles (especially small ones).
View detail
I've been waiting a long time.
No more vibrations, and the height of the phone position has been increased for better visibility. View detail
Fits: YAMAHA MAJESTYS, YAMAHA Majesty S
Repeat for the second unit
If you have a small phone, you can install it Firmly.
In Xperia, there was a phenomenon that the power button was pressed.
It also comes with a band to help prevent it from falling.
In fact, with the second Repeat, the place where the phone is held became hard and the release button was also hard and difficult to use. There are a lot of new smartphone holders out there now, so I plan to replace it when it breaks. I decided to use the →RAM Mount.
It's a Quick Type, so it's great for two devices.
Recommended
View detail
Fits: YAMAHA BirdCity, YAMAHA MAJESTYS, YAMAHA MT-03 (2015-), YAMAHA MT-25, YAMAHA MT03, YAMAHA Tricity155
A good holder.
I think this is an excellent holder in terms of texture and hold.
This is Quantity:Pair (for Left and Right) It is fixed with a variable portion of
The top and bottom are the type that are fixed with screws before installation.
Finally, fix it with the silicon band.
I've been using it for about 3 years and it has never fallen when I'm using it correctly.
This one has two parts (LargeSmall) to support the bottom side of the phone, but the Small one may break during use. (My friend broke his.)
This part has been processed in such a way that it may have reduced the strength of the part.
I've installed it on several motorcycles, and I don't know if it's the product, the location, or the vehicle, but sometimes it's noisy due to vibration.
There are parts of any product that are not good or hit or miss, so in general, I am satisfied with this product.
But it's a little expensive.
View detail
Fits: YAMAHA Tricity155, YAMAHA MT03, YAMAHA BirdCity, YAMAHA MAJESTYS, YAMAHA MT-25, YAMAHA MT-03 (2015-), SUZUKI GSX-R125, KAWASAKI Z125 PRO
I installed it for navigation on my phone while touring.
I installed this on my 2019 YZF-R25.
I've mounted it on a bar for mounting my phone, and I've been able to use it comfortably without any shaking while driving. It can be fixed quite firmly, so there is no chance of the phone falling off and flying away when you fall.
As a personal point of concern, it is easy to detach and attach with the One-touch, but as I used it, the gold part to release the fixation became stuck, and I had to put a lot of force to detach it.
In addition, perhaps due to long-term exposure to UV rays, the Bracket that holds the top and bottom of the phone in place broke after about a year of use.
It's not a bad product in terms of texture and feel, but I felt that the durability was a bit inferior to the higher-end models from Ram Mount, etc.
View detail
Difficulty in moving and fixing the slide part.
I installed it on the handlebar of my Z650, even though the area around the handlebar is narrow and small. It looks nice and simple, but when I installed it on my phone (Xperia5), I had to slide the fixing part, but the slide was not smooth and it was hard to install because it was caught. Also, the lever for fixing is hard and difficult to do. View detail
Fits: YAMAHA BirdCity, YAMAHA MAJESTYS, YAMAHA MT-03 (2015-), YAMAHA MT-25, YAMAHA MT03, YAMAHA Tricity155
No fatigue fracture?
[Usage]
This is a must-have product for using your smartphone as Navigation in Touring.
I can't see it while I'm driving, but I can listen to the voice guidance while it's charging, powered by my motorcycle, so I don't have to worry about running out of battery.
Attaching and removing the phone is a bit of a hassle, but not too much.
The charging cord can be connected without any problem.
[Is what you received as Image?
The product arrived exactly as described.
The clamp is compatible with Φ22 to Φ29, so it can be attached to Taper Handlebar.
[Try it.
There is no visible vibration, so you can check the display even by glancing at it.
However, I do plan to purchase the Seismic Spacer that is scheduled to be released.
I pinch it with the SIDEHook, but I'm worried about it falling, so I pinch it hard. I'm worried that the plastic SIDEHook will get tired and break.
The silicon band, which is supposed to prevent the device from being dropped, should be a little tighter as insurance.
(Points to note)
Two types of SIDEHooks and two heights are available for a total of four different thicknesses, so you can check the thickness of the phone you are installing and choose the SIDEHook that best suits your needs.:Let's set it.
Adjust the height adjustment slide arm so that it is also Exactly in between.
Rigid type may be somewhat more theft-proof.
Comparison with other products
There are products that allow you to attach and detach your phone with One-touch, but the difficulty is that you can't choose the Smartphone CaseDesign since it is a dedicated Case.
It is also good that this holder can be used even if you change your phone.
Quantity the phone:It can also be used to hold the charging cord when it is not set.
I think it would be better if the direction of rotation could be easily done.
It seems a bit expensive for a product.
View detail
Smartphone Case Supply Parts
I'm glad to get it in Parts. Arm's Design was changed a little, but it doesn't affect compatibility. View detail
Fits: YAMAHA BirdCity, YAMAHA MAJESTYS, YAMAHA MT-03 (2015-), YAMAHA MT-25, YAMAHA MT03, YAMAHA Tricity155
Camera cracks. When the phone is not attached, it is noisy.
[How is it used?
It's a Other Brand ProductHandlebar with separate handle, but I didn't need to use Bracket.
Was the installation difficult?
It is easy to install because it belongs to Hexagon Wrench.
How was your experience with it?
The part that holds the phone is Material:If you don't have your phone on in Plastic, the vibration makes it noisy. I don't want to wear my phone when I'm going for a walk around the neighborhood, but I have to because of this.
When I think that the phone itself absorbs this vibration, it doesn't seem to be so good for the body of the phone, and in fact Camera was broken. (Android)
As a Smartphone Holder, it's affordable, and if you don't make a mistake, your phone won't fall off, but it's not very useful, and the plastic is cheap and makes the Handlebar look tacky.
If you're on a budget, you might want to spend a little more on a good Parenthesis.
[Included Parts:were they on?
It was all there.
Point and hang of installation
If you are using the OEM handlebar on the Ninja 400, you can either run the bracket through the Stem Nut or through the unused screw hole in the clutch lever.
I replaced the handle with SNIPER's Other Brand ProductSeparate handle, which has enough room for the handlebar width, so it can be installed without the bracket.
View detail
Is it really Large sturdy?
There is a gap between the Attachment on the back of the Case and the Locking Parts, and it is rattling.
I checked with Mr. Terasawa at the DAYTONA Customer Service Center. "Strength wise, no problem!" It was a single point of view.
With all this rattling around, I'm worried that it will be damaged while driving or that the vibration will break the Smartphone.
View detail
Fits: YAMAHA MAJESTYS, YAMAHA Majesty S
I installed it because I couldn't get it out of my phone Pocket.
[How is it used?
I put my phone in Pocket now, but it is troublesome to take it out every time I need it, so I decided to install Smartphone Holder this time!
Was the one you received as per Image?
The item was exactly what I thought it would be.
How was your experience with it?
I was able to successfully attach the smartphone I use.
The angle can be adjusted every 18mm, so I think it is easy to use.
[Points to note]
I didn't notice this product either, but if you install it vertically, the Body of the Holder moves with vibration!
I followed the instructions exactly, but that part moves easily, so be careful how you install it.
When I put it on sideways, it still moved up and down.
So I once improved the Holder to be stuck by biting two Rose Shite Washer.
How did it compare to other products?
I didn't think about other products and only bought this product, so I didn't compare them.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
Because it becomes loose by the rattling and the vibration when I put on the body of the smartphone though I wrote before, the part of this HolderBody
I think it could use a little tightening up.
It depends on how the phone is installed, but I think this symptom will appear.
[I think the way I installed it may be different, but what do you think?
I hope that Manufacturer will consider this.
View detail
I was worried about this, but I'm glad I did.
There are several products to choose from, but the one that looks like it can be installed securely and
I chose it because it seems to be able to handle any smartphone Button placement, etc.
I was able to mount it to the Motorcycle bar and it fits nicely behind the Windo Windshield.
There is no problem plugging in the USB cable.
View detail
Fits: YAMAHA BirdCity, YAMAHA MAJESTYS, YAMAHA MT-03 (2015-), YAMAHA MT-25, YAMAHA MT03, YAMAHA Tricity155
JUST for S20+.
I bought this because I sometimes use my phone as a Navigation device.
At first I used it vertically, but I changed it horizontally because it interfered with Tank Bag.
The Hold has a good Click feel and the included Silicon band, so I'm not complaining, but the claws that hold the phone down and the Red Shim parts were missing one of them before I knew it.
I ordered it as Repair Parts and re-installed it, but it went away again in about 2 months. Crying 。
If you could do something about this ……
View detail
Fits: YAMAHA BirdCity, YAMAHA MAJESTYS, YAMAHA MT-03 (2015-), YAMAHA MT-25, YAMAHA MT03, YAMAHA Tricity155
Both the phone and Radar are Firmly
[How is it used?
Street Riding and Touring
Was the one you received as per Image?
Street Image
How was your experience with it?
Easy to attach and detach the device
Holds the equipment securely.
[Points to note]
You should always use the included silicon rubber as well.
How did it compare to other products?
GALAXY Notebook can be installed and is useful. Material of other companies:Easier to use than Aluminum, RAM, etc.
View detail
Spacer like this is nice to have.
I have installed a smartphone holder on my NMAX, but the fixed size of the holder and the size of the pipe I want to install the holder on are very different.:I was using multiple layers of Rubber Spacer to hold it in place. I found this Spacer and bought it because it was not very stable. As a result, I was able to fix it well.
I would recommend it, but the only thing is the price... I would be happy with another lower price.
View detail