Reviews
Is good
It is installed with DAYTONA's Bracket for Mirror Holder.
It is carefully made and has a high quality feel.
The angle can be freely adjusted and firmly fixed with the included double-sided tape.
View detail
Is good
ETCAntennas can be securely fastened by installing it together with DAYTONA's AntennasBody Bracket.
It is installed together with Mirror by co-tightening, so it does not get in the way.
The location of Antennas is determined by the Best position.
View detail
It's not intended for...
What made you decide to buy?
In order to install the DriveRecorder-FrontCamera neatly without drilling holes in the OEM Cowletc.
How was your experience with it?
After installing the DriveRecorder, I did a test drive and checked the recorded video. The FrontCamera position was perfect and the video was beautiful without any part of the vehicle being visible.
What is the point or hang of the installation?
Before the purchase of DriveRecorder, I was troubled considerably about the FrontCamera installation place. On installing "Do not drill holes in the OEMCowl. "It must be smooth to remove. "The Camera code should not be overloaded. The DAYTONA satisfies all three conditions. "ETCAntenna BracketforAmerican. The size of ETCAntenna Bracket is perfect for the size of CameraMount, so I decided to install it on the bottom side of the Light Cover using ETCAntenna Bracket. "ETCAntenna BracketforAmerican. And I was right.
View detail
Best Position.
The ETCA Antennas can be fixed firmly by installing with the Bracket for Antennas Body made by DAYTONA. View detail
I decided on the quality of the product.
It's been installed together with a DAYTONA Mirror Holder Bracket from the same brand. You can adjust the angle freely and fix it firmly with the attached Double-sided Tape. View detail
In addition to ETC Antennas.
There is a way to use it by devising other than the Antenna Mount.
I used it as a mount for the Lap timer to be installed when running Circuit.
Once assembled, the neck section can be angled to make it easier to see the Lap timer.
View detail
Used in GPS Lap Timer's Mount
It is for ETC, but I used it with Mount of GPS Lap Timer.
It fit in nicely.
I think you can also use a CameraMount or something similar.
View detail
Used as Universal Bracket
【What made you decide the purchase?】
- Originally it was Exclusive Bracket to install ETC, but because it was rare Crank style Bracket, I thought that it would be a substitute for the L letter Bracket two piles that I had installed so far
【How was it actually used?】
- The place I used this time was the exchange with Bracket where Temp meter was installed, the Bolt size of Cowl side which we were tightening was M5, the size of Meter Bracket coincidentally coincided with M10. Fixing with Meter Bracket uses Rotor bolt
- After installation, the Temp meter approached Meter, so that the appearance became Refreshing, and there was no vibration or gap even when traveling
[Is there anything I was disappointed about?]
- None
【Hope for Manufacturer - Please let me know if you have any improvement points]
- Despite being a special item, I wanted you to describe the fine size of Bracket. Because I did not see it anywhere I will place it
【Have you compared items?】
- Bracket of each Manufacturer and Bracket of Home center
[Others]
- Since it is a Bracket used to attach the ETC to the last, when using it as a Universal Bracket, it is necessary to have some contrivance. Size of Bolt hole is also M5 and M10 so usability is not good
View detail
By the delivery service by motorcycle, it is common, and attaching ETC attaches this Antenna stay and it has been using ETC recently. Angle adjustment was also completed and attachment was dramatically completed in the Simple. Since the raw material
By the delivery service by motorcycle, it is common, and attaching ETC attaches this Antenna stay and it has been using ETC recently.
Angle adjustment was also completed and attachment was dramatically completed in the Simple.
Since the
raw material is also solid, there is also no corrosion so much, and it begins to use, and becomes for about eight months, but there is no Rust, and I purchase and think that it was good.
It is a place where a thing also with the cheap
price is quite attractive!
View detail
Although it is antenna stay, since availability is good and cheap as general-purpose stay which can carry out angle adjustment, it is user-friendly. It is utilizable for attachment of accessories. Although used for attachment of navigation combini
Although it is antenna stay, since availability is good and cheap as general-purpose stay which can carry out angle adjustment, it is user-friendly.
It is utilizable for attachment of accessories.
Although used for attachment of navigation combining this and posh general-purpose stay, grip power is also good and the range of angle adjustment is also wide.
Since it is a stainless, durability is also expectable.
Although the general-purpose stay made from aluminum for DBM was also considered from area, a price, and angle adjustment, since durability had uneasiness with thin aluminum, the combination of abandonment and the stay here was chosen.
I think that it is utilizable since an angle and the attachment range can be extended also in combination with the stay for mirrors of a daytona.
View detail