Reviews
stout
I purchased this product to use my phone as a car navigation system. I chose the Rigid type this time because once I put it on, I don't take it off so often.
The product itself is very sturdy and very secure. It is also very adjustable to accommodate large phones. This adjustment is very nice since there are large smartphones these days.
View detail
Frequency of use and cost-effectiveness.
It is a must for Sports type motorbike. I have a Camera fixed to it. View detail
Cost-effective Income
I used to use SENA's Income, but have not used Income for a while since it broke.
It is Reasonable compared to SENA's Income, but the feel is comparable.
However, as others have mentioned, I find the button on the top hard to press.
I personally think SENA is better in terms of Button operation.
However, I think it is quite cost-effective to have so many functions at such a low price.
I can recommend this product to first-time Income buyers.
View detail
It's a reliable product.
Material:I chose this one because I thought Plastic's was a little less trustworthy.
The aluminum arm has a luxurious feel and can be fixed firmly.
No Vibration Absorption Unit, but no problems so far with Android.
It comes with an auxiliary silicon band, and the Instruction Manual says to be sure to use it, but the Package does not mention it. This seems a bit unfair.
Well, even if you don't use it, it looks Large sturdy.
View detail
Fits: SUZUKI GSX-R1000, HONDA CBR500R, SUZUKI GSX-R1000, HONDA VFR1200F DualClutchTransmission, HONDA VFR1200F DualClutchTransmission, HONDA NSR250R, HONDA CBR650R, HONDA CBR600RR, HONDA CBR400R, HONDA CBR400R (2013-), HONDA CBR250RR (MC22), HONDA CBR250RR (MC22), HONDA CBR250RR (MC22), HONDA CBR250RR (MC22), HONDA CBR250RR (MC22), HONDA CBR250R (2011-), HONDA CBR250R (2011-), HONDA CBR250R (2011-), HONDA CBR250R (2011-)
For fixing Multi Bar Holder
[How is it used?
I purchased a Multi Bar Holder for Touring to secure it to the Stem Mount.
TZr250R (3XV) I wondered if I should use another SizeSmallest one, but I found a blog where this one was installed, so I decided to use it as a reference.
Was the one you received as per Image?
It was just like the picture.
Was the installation difficult?
I think another SizeSmaller one would be better for TZr250R.
Since the vehicle is old, the inside of the stem is uneven due to rust, so it does not go in easily.
Finally, this product was scraped off with a sandpaper and then lightly tapped in with a plahan.
How was your experience with it?
It is perfect for use with the Multi Bar Holder.
There is no sign of loosening at all, and it is firmly fixed.
[Included Parts:were they on?
This product only.
[Was there anything that disappointed you?
I thought it would be nice if Bolt was Black as it is not a particularly treated item.
【Review】
Essential items for fixing the Multi Bar Holder to the Stem.
It is inexpensive and good for a variety of vehicles.
However, as mentioned above, I think that for the TZr250R, it is better to use a size up to φ17mm.
View detail
Fits: HONDA CB250R, HONDA CB250R, HONDA CBR250R (2011-), HONDA CBR250R (2011-), HONDA CBR250RR (MC22), HONDA CBR250RR (MC22), HONDA CBR250RR (MC22), HONDA CBR250RR (MC22), HONDA CBR250RR (MC22), HONDA CBR400R (2013-), HONDA CBR600RR, HONDA CBR600RR, HONDA NSR250R, YAMAHA YZF-R25, HONDA CB300R, HONDA CBR500R, YAMAHA YZF-R3
Easy to use
[How is it used?
I bought it for Touring to install Smartphone Holder and USB power supply.
There are many Multi Bar Holders available, but we chose this one because of its simple shape and low price.
Was the one you received as per Image?
It is a short type, so it is quite compact.
Was the installation difficult?
Mount BoltQuantity of the same brand.:With Set, it takes only a few minutes.
Since the bolt is fixed in one position, it is necessary to visually check if the parallelism is correct and tighten the bolt, but that is about all you need to pay attention to.
How was your experience with it?
There is of course no problem to attach a phone mount and a USB power supply.
If you want to attach more than three items, you will need to adjust the position, etc., so it is better to think about what you will attach beforehand.
[Included Parts:were they on?
This product only.
Boltetc. is required separately for fixing.
[Was there anything that disappointed you?
Not particularly
【Review】
It is good to be able to do Mount at an affordable price.
You can choose from a variety of lineups, such as the fixing method and USB recharging, to suit your needs.
View detail
A bit sorry
I tried to install a RAM Mount with this on a 12mm diameter bar.
When I tried to apply it, it was 13mm, so it was loose and turned.
I tried shaving the gap to accommodate 12mm, but no matter how much I tightened it, it still slipped and rotated and could not be fixed.
I tried to put double-sided tape on the Pipe to hold it in place, but the entire Tape kept spinning.
I gave up at this point. I'll think of another use for it; I wish the inside of the Spacer was a soft Material.
View detail
To prevent phone damage
There are many occasions when I use Navigation on my smartphone when I go to an unfamiliar place, but I decided to purchase this product because I wanted to prevent damage to my smartphone to some extent, and I wanted to do so within an easy range. I decided to purchase this product because it is relatively inexpensive and has favorable impressions. The fact that the base and length adjustment arm are made of gold gives me a sense of security, and the easy operation of attaching and detaching the phone makes it convenient to use.
The only thing is that the Parts at the tip of the Arm that holds the phone are Material:Since it is made of plastic, I thought it would be better to have some kind of support to prevent it from falling. With this, in case Material:It seems to me that even if the Plastic part is damaged, it would inhibit the phone from falling to the ground.
I felt that it would be more secure if the holding part of the Arm tip was also made of Gold genus, even if the price was slightly higher.
View detail
Mounted on X-MAX
I purchased this product with the claim of vibration reduction. Easy to install and good design. I haven't had any problems so far with my phone breaking. It is easy to use. View detail
Fits: KAWASAKI Ninja ZX-25R SE KRT Edition, KAWASAKI Ninja ZX-25R SE, KAWASAKI Ninja ZX-25R, KAWASAKI Ninja ZX-4R SE
Can be installed on 2023MODEL
It was only labeled as compatible with conventional vehicles, but I was able to install it on the '23 MODEL without any problems. View detail
Fits: YAMAHA NMAX155, YAMAHA NMAX155, YAMAHA NMAX, YAMAHA NMAX
I am glad I bought it. It is long and can be installed in many ways.
[How is it used?
I installed this on a 2019 NMAX 155.
I have a small Mirror mount that I had on my motorcycle in the past, but I was interested in purchasing this product after seeing other motorcycles with this product installed.
Was the one you received as per Image?
As per Image
Was the installation difficult?
It is easy to remove and install OEMMirror.
The Instruction Manual is also minimal, but I could work by feel without looking at it.
After installing it, I thought that the bar comes surprisingly close to the front.
How was your experience with it?
I immediately attached the Smartphone Holder and the wide mounting location makes it very easy to adjust the location.
It is nice to be able to make fine adjustments, such as making it in front of you or shifting it slightly to the side.
Also, even with the Smartphone Holder installed, there is still plenty of room for a USB or HelmetHook.
This depends on the shape of the Smartphone Mount, but the one I have pops out quite far forward, so Navigation is not in view in my normal riding position.
Obviously, you have to move your eyes, so that is the only part that is a little difficult to see.
[Was there anything that disappointed you?
Nothing in particular, but I'm sure it will rust soon after being exposed to rain for a while.
View detail
Fits: YAMAHA Tricity155, YAMAHA MT03, YAMAHA BirdCity, YAMAHA MAJESTYS, YAMAHA MT-25, YAMAHA MT-03 (2015-), SUZUKI GSX-R125, KAWASAKI Z125 PRO
It is a good item
Another motorcycle was a rigid type, but this time we installed this slightly less expensive product. The installation was completed in about 10 minutes and I am able to use it without any problems. I thought it would be better if the angle of the carrying surface could be changed to Up downwards. View detail
Fits: HONDA CB250R, HONDA CB250R, HONDA CBR250R (2011-), HONDA CBR250R (2011-), HONDA CBR250RR (MC22), HONDA CBR250RR (MC22), HONDA CBR250RR (MC22), HONDA CBR250RR (MC22), HONDA CBR250RR (MC22), HONDA CBR400R (2013-), HONDA CBR600RR, HONDA CBR600RR, HONDA NSR250R, YAMAHA YZF-R25, HONDA CB300R, HONDA CBR500R, YAMAHA YZF-R3
Sufficient length
This is a change from Long Type, but the key cylinder is offset, so the range of use was very biased.
I changed to Short Type, and it works well with Navigation Holder and USB power supply. In my case, it was a good decision to choose Short Type.
View detail
communicate by wire
It's a great product to use, but
Due to the failure of the wired Disconnection there is
If it's a broken wire near the Speaker
Speaker for Repair is available as a Single Item at a discount.
Wallet-friendly maintenance is possible.
However, the disconnection between Body to Jack
It was overwhelming and troubling.
To prevent wires from getting caught when removing and installing the full face.
Even if you take care of it, the disconnection will continue, even as a User.
I can't think of any more countermeasures.
I tried a wireless Earphone after 3 wires were broken.
When I take off the helmet, it falls off and I can't do anything about it.
After all, there are no other flat Speaker options.
I bought a fourth one.
Rather than adding FMRadio functionality
I wonder if you could take care of the disconnection near the Body exit of the line.
The disconnection near the Speaker is
Speaker inside HelmetPad cover
By putting it in, it's totally gone.
View detail
I kinda like Gui Mick. (Lol)
It is pricey, but there is something about the giMick that is white in the face.
Well, not only is it good looking, but it is also easy to use.
There is a locking mechanism, but you might not want to trust it completely. To be honest, you never know what might happen.
Dropping a phone is the end of the world. Namu! (σpωp) σ
View detail
Fits: YAMAHA BirdCity, YAMAHA MAJESTYS, YAMAHA MT-03 (2015-), YAMAHA MT-25, YAMAHA MT03, YAMAHA Tricity155
SmartphoneFolder attached to SEROW250
Smartphone Holder is temporarily needed and installed.
The Front was taken out by sand and fell over to the Left once on Asphalt, but the phone did not come off or break and Large was sturdy.
View detail
Fits: HONDA VTR250, HONDA FTR223, HONDA FTR223, HONDA CB650R, HONDA CB400SS, HONDA CB223S, HONDA 400X, HONDA CB150R, HONDA CB300R, HONDA CB500F, HONDA CB500X, HONDA Rebel300, YAMAHA MT03, YAMAHA NMAX155, YAMAHA XSR900, YAMAHA MT-25, YAMAHA NMAX, YAMAHA MT-07, YAMAHA MT-09, HONDA MAGNA(V-TWIN MAGNA)
Mounted on ADV160
I put it on my ADV160 to attach ActionCamera.
I chose the Mirror mount to avoid the screen. I have used it on other cars and think it is the most universal.
Both quality and texture are perfect considering the price.
View detail
Fits: HONDA VTR250, YAMAHA MT03, HONDA Forza300, HONDA CB500X, HONDA CB500F, HONDA CB150R, YAMAHA XSR900, YAMAHA MT-25, YAMAHA MT-09, SUZUKI Gixxer 150., SUZUKI Gixxer 250, SUZUKI DL1000 V-STROM250, HONDA HORNET250, HONDA FORZA Si, HONDA FORZA Si, HONDA JADE, HONDA glom, HONDA CROSSCUB110, HONDA APE 50, HONDA XR100MOTARD
well done
I don't have enough space on my bike handlebars.
I needed a bracket to fix the phone holder and a place to mount the Insta360,
This product solved it once and for all.
Daytona products never disappoint
Installation takes about 5 minutes. Quality is also lacking. -------------------------------------------------- -------- Because there is no right place in the bike handle I needed a bracket to fix the cell phone cradle and a place to mount the Instagram 360, This product has been solved at once. Daytona products are not always disappointed Installation is enough for 5 minutes. Quality is also lacking. Powered by Google Translator
View detail
![DT-E1 [DT-E1] OptionFace panel](https://img.webike-cdn.net/catalogue/images/65615/15117_TS.jpg)
To the self-satisfied immeChain.
Not in terms of performance, but for FashionStyle's self-satisfaction!
It's a regular plastic frame, so you might expect it to be a little cheaper, but it's moodUp??'sItems.
The exchange procedure is not that difficult.
It can be easily removed by inserting a flat object such as a slotted screwdriver and connecting it, but I think that a plastic spatula can be used for recommendation without damaging the body, rather than a gold driver.
View detail
It helps me when touring!
I bought this to use when touring.
It is able to cope with the vibration of SR400.
There was no particular vibration that made the screen difficult to see or loose or any other Smartphone malfunction.
View detail