Reviews
Wouldn't this be the perfect maintenanceSTAND for Middle motorcycle!
I am satisfied with the stability of the vehicle when using the rear stand, the lightness when lifting up, and the price. I was thinking of replacing the tires by myself in the future, and I am also hoping to expand the range of maintenance of other parts. (The Z650RS weighs 188kg *Rear Carrier would be better) It only requires a little weight by hand. It is very convenient because I used to do one side lift up with a piece of wood.
Comparisons were made with Company S, Company A, and Company J. As a result, we decided on DAYTONA. As the reason for the selection, I considered that the structure of the most load-bearing part is Square Type, which seems to be sturdy, and that it is superior in terms of comparative cost. Also, the fact that the product introduction image is of RS was a deciding factor. The other 3 companies are all sold separately, and S and A are a little cheaper than DAYTONA, but there were some comments that the stability of the frame is not so good. I have not actually used them, so I am not sure.
The Stand Hook holder is specified to have a diameter of 14 to 18mm. If the diameter is larger than this, it will not fit in the attachment. Also, it takes a little getting used to inserting the Attachment.
The only drawback is that the latch of the U-shaped attachment is too thin and I am not sure if it is durable. I am not sure if it is durable or not. I don't know because I haven't used it yet. However, spare parts are available, so there is no need to worry. (This is not a problem for those who can weld.)
J company claimed that the handlebar should be set to "Left" and "Up" when the brake is "STAND-UP", while DAYTONA company claimed that the handlebar should be set to "Straight". I am not sure of the difference, but I found that the fixation of the hook of the front brake at the time of OthersLift up was the same in all companies. I hope this is of some help.
View detail
Better than the standard metal pegs most tents come equipped with.
Considering the price being what it is, these pegs are accordingly of high quality construction & light weight. Their shape does seem to help keep them in place once driven in, they don't seem eager to come out on their own. Overall a really nice product. View detail
Better than basic tent pegs
Nice shape & light weight, far better than standard pegs at staying in the ground & of course they won't bend if driven in hard. Worth the price. View detail
Almost perfect except for the price.
The front and rear stands seem to be the best in a certain manufacturer, but this product is sufficient for cleaning and simple maintenance at the Amateur level.
However, the price could be lower, so the rating was not a perfect score.
View detail
I only write about the dissatisfactory points! See other Reviews for the good parts!
After installing the product, I went on a touring trip of about 1100km in GW, and I will write what I think of the Negative of this product that I felt at that time.
1. Pairing interruption
Pairing with the phone was disconnected while driving and the map that was being displayed via Android auto disappeared 6 times.
Sometimes the connection was automatically restored immediately after disconnection, and sometimes it was not restored even after 30 minutes. It was a strange and time-consuming process.
I would like to tell you that I have been in trouble more than once because of course it is not possible to redo Pairing with the phone while driving.
I learned after purchasing the Monitor that other companies' Monitors use a Bluetooth 5.0 Tip, while DAYTONA uses an inexpensive Bluetooth 4.2 Tip.
That, too, is a point of dissatisfaction.
The phone is a SONY Xperia1 ii
2. No Pairing
This product has a convenient feature that, after initial Pairing, automatically searches for and connects to the previously connected phone the next time it is activated.
It does not Pairing easily. Every time.
The Instruction Manual says something like Pairing at startup and Android auto startup takes about 1 minute to avoid signal congestion.
Sometimes it takes a minute to connect, but more often it does not connect even after 5 or 10 minutes, not to mention a minute, so when touring in distant areas, I rely on Navigation and was sometimes frustrated because I could not start driving until Android auto started up.
The Instruction Manual says something about trying to connect from the phone side when it is not Pairing, but when there is an automatic connection failure, the Monitor does not respond even if the phone is operated. Even if the phone side searches, Monitor does not receive the search.
I don't know if it is device compatibility with the phone or a software issue, but I would like to see a study focusing on connectivity and a softwareUpdate.
Incidentally, this Monitor can up-date software in USBMemory if the Manufacturer publishes the up-date program.
3. Compatibility with Income from other manufacturers
I usually run with my Touring buddies while talking on Income.
When Android auto started up, Income's Microphone feature would sometimes be turned off, making it impossible to make calls.
I can't figure out the cause and restarting Monitor fixes it.
I have a beacom connected, not a DAYTONA Income, so perhaps there is something on the software side that is causing a conflict.
I don't think we have a choice about this.
Overall
So far, the product has caused more dissatisfaction than satisfaction due to the unstable connectivity with the phone.
There are many good points, such as the fact that the sound is better when connecting Monitor to Income than when connecting Income to a smartphone because it has an equalizer, and the robustness of the mount, which will never fall off. I would like to see the connectivity of this product improved through software updates.
DAYTONA, we are counting on you!
View detail
DAYTONAfor Repair
I bought this one because I cry when I drop it.
Used for thruxtonrs.
The oval-shaped swing arm has a shallow hook.
If this is not possible, use a Y-shape.
View detail
useless
Purchased for Spoke maintenance. Conclusion:It can't be used. First of all, I can't use it with Harley because I can't get over the bumps. It was faster to use Jack. View detail
Limited installation methods for back camera
Wiring length of the back camera is halfway; 1m on the Camera side and 1m on the Extension Cord,
The Camera side should be about 30cm and the Extension Cord should be about 2m.
Unlike a driver's camera, the Body's mounting position is near the with handle, so the current wiring length requires a connector connection at the halfway point, making wiring difficult.
The Cable that connects to the Body also has a 4-point screw on the Body Reverse side, but this is troublesome to install.
With this structure, even if the BodyMount base can be removed with One-touch, when the Cable is inserted again,
Since the connector is fixed with a rubber band to prevent 4-point tightening, it is necessary to use a precision driver to remove the screws and insert the cable before fastening the screws, so the screws are left attached after all.
The four screws on this base are not designed to be detached, so if they are completely removed, the screws may be dropped and lost.
The back camera can only be mounted on the upper side of the base in the direction from which the camera is suspended, and cannot be flipped up and down in the body settings.
The position of the Fixing Screw between the Base and Camera is not in the Center, so changing the mounting direction of the CameraBody is necessary,
Difficult to set the adjustment angle downward because the angle of the Camera is Up.
I tried attaching it to the Fender, but it could only be adjusted slightly Up from horizontal.
View detail
Fits: KAWASAKI Ninja ZX-4R SE
M820WDController CT110 HUNTER CUB Brake folder Exactly for mounting
[How is it used?
MiVue M820WD Drareco Controller mounted in the Right SideBrake folder of the CT110 HUNTER CUB2BJ-JA55.
Although the name of the folder is Clutch folder, as shown in the product description photo, the folder can be attached to the Right Side Brake folder as well, effectively and securely.
Was the one you received as per Image?
Yes
Was the installation difficult?
It is easy. The angle of the brake lever changes when the brake folder fixing screw is loosened for installation. If you mark the current position before loosening the screw, you will not have to readjust it when assembling.
How was your experience with it?
It can be mounted securely, making it easy to work with Switch operation.
[Included Parts:were they on?
Yes. Matching mounting Bolt and collar are included and ready to install.
[Was there anything that disappointed you?
There is none. As expected.
▼ Requests
It would be easier to find a Brake folder if the name of the product listed is "Clutch holder...".
View detail
Smartphone Folder to be expected to be durable in the future.
I had heard that attaching a smartphone to a motorcycle would damage the camera's autofocus, so I did not install one even after purchasing a motorcycle. However, recently I have been touring more and riding on unfamiliar roads, so I decided to install a folder. It is easy to install and holds the phone firmly. The parts that are subject to force are made of aluminum parts, and the durability of the Folder itself seems to be promising. I installed it on the Left Side of the Handlebar, but since the eye movement while driving is Large, it would be safer to put it in the Center. Whether this product is really good or not depends on how long it will protect my phone. View detail
FirstDisplayMonitor
Installation was done by Dealer.
The hardness of the USB port, the problem of breaking if the USB port is not facing the right way, and the hardness when removing the USB port from the Slide, etc., give the impression that the product is not made with frequent connection and disconnection in mind, although it is possible to remove the USB port.
So it is basically to be used with it attached all the time. It is possible to put Wire through it to prevent theft, so I recommend using it.
I feel Merit to have a wired connection as well as a wireless connection, but you need to be careful not to lose the USB Cap!
I have not used it that much yet, but the screen is large, visibility is high, and Response is not bad.
View detail
Daytona spool nut
Fits perfectly! View detail
It's secure
[How is it used?
Used for FrontCamera installation of the MiVue M820WD driver recorder.
CT110 HUNTER CUBFrontCarrier mounting bolt was co-tightened to the Bolt. Although this is not where it was originally intended to be used, it was securely installed.
Was the one you received as per Image?
Yes
Was the installation difficult?
Easy!
How was your experience with it?
I am satisfied with the image and no shaking.
[Was there anything that disappointed you?
Expected
View detail
First time security products
I was not sure which security device to use for my first motorcycle, but I found it convenient to use only one key to unlock the lock, so I bought it. I thought it would be a better product if both the Chain and U-shaped Lock had a buffer material that could be moved where it meets the wheel. View detail
It is a defense against all odds.
Chain locks between Wheels or between front wheel and Center Stand.
U-Lock is used for outings.
Chain is difficult to load and can be used at home.
It is unlikely to be destroyed by bolt cutter, and I think it is as defensible as military standard.
View detail
Fits: KAWASAKI ELIMINATOR SE, KAWASAKI ELIMINATOR
expensive
Was the one you received as per Image?
Yes
Was the installation difficult?
Easy
How was your experience with it?
Nothing to use, just Screw.
[Was there anything that disappointed you?
price
View detail
Easy to install, easy to use, but ….
It is easy to install and easy to use, but it looks tacky when the Bag is not attached. Also, the gap between the bag and the car body is wide, so it looks tacky from the back.
Also, the price of the separate installation kit for the OEMRear carrier is too high.
View detail
Used for SHOEIEX-ZERO
This size is ideal for helmets that do not have speaker holes like EX-ZERO and have no space in the mounting position.
I have used the standard Speaker and the thin Speaker, but the Smallest is the thinnest and the sound quality is the same as the others.
The price is a bit high, so IncomeQuantity:It would be appreciated if the Speaker of the Set could also be selected.
View detail
Helmet lock and Quantity:Set so very SMART!
After purchasing DAX125, I wanted to do something about the luggage space and helmet lock, so I installed DAYTONA's side bag support. If I use a larger bag, the Helmet lock will not work without a wire or something. View detail
Fits: HONDA Rebel1100, HONDA Rebel500, HONDA Rebel250
Easy to use
I purchased the Round Type because my ST250 has a circular swing arm. I am satisfied with it and can use it without any problem. View detail