Reviews
![[Repair parts] Disc lock for stroger chain lock](https://img.webike-cdn.net/catalogue/images/116328/31255_TS.jpg)
Fits: KAWASAKI Ninja ZX-4R SE, SUZUKI V STROM 250SX
Convenient locking by pushing in
The simple shape, light weight, and compact design are also good.
I use it with another Manufacturer's Chain at home and as a Disc Lock with Single Body when I am on the road.
Rubber lids are sold as Repair Parts and may be purchased in advance.
View detail
Purchased for my first Tandem touring
I bought it because I wanted to do Tandem touring with my wife who has never ridden a Motorcycle.
The handle, lock, and belt all seem sturdy.
My wife said that the Hanging Belt made the ride less scary. I am glad I bought it.
View detail
Wouldn't this be the perfect maintenanceSTAND for Middle motorcycle!
I am satisfied with the stability of the vehicle when using the rear stand, the lightness when lifting up, and the price. I was thinking of replacing the tires by myself in the future, and I am also hoping to expand the range of maintenance of other parts. (The Z650RS weighs 188kg *Rear Carrier would be better) It only requires a little weight by hand. It is very convenient because I used to do one side lift up with a piece of wood.
Comparisons were made with Company S, Company A, and Company J. As a result, we decided on DAYTONA. As the reason for the selection, I considered that the structure of the most load-bearing part is Square Type, which seems to be sturdy, and that it is superior in terms of comparative cost. Also, the fact that the product introduction image is of RS was a deciding factor. The other 3 companies are all sold separately, and S and A are a little cheaper than DAYTONA, but there were some comments that the stability of the frame is not so good. I have not actually used them, so I am not sure.
The Stand Hook holder is specified to have a diameter of 14 to 18mm. If the diameter is larger than this, it will not fit in the attachment. Also, it takes a little getting used to inserting the Attachment.
The only drawback is that the latch of the U-shaped attachment is too thin and I am not sure if it is durable. I am not sure if it is durable or not. I don't know because I haven't used it yet. However, spare parts are available, so there is no need to worry. (This is not a problem for those who can weld.)
J company claimed that the handlebar should be set to "Left" and "Up" when the brake is "STAND-UP", while DAYTONA company claimed that the handlebar should be set to "Straight". I am not sure of the difference, but I found that the fixation of the hook of the front brake at the time of OthersLift up was the same in all companies. I hope this is of some help.
View detail
Better than the standard metal pegs most tents come equipped with.
Considering the price being what it is, these pegs are accordingly of high quality construction & light weight. Their shape does seem to help keep them in place once driven in, they don't seem eager to come out on their own. Overall a really nice product. View detail
Better than basic tent pegs
Nice shape & light weight, far better than standard pegs at staying in the ground & of course they won't bend if driven in hard. Worth the price. View detail
![[Repair and Optional Parts] L-Shaped Attachment with Band](https://img.webike-cdn.net/catalogue/images/112529/29849_TS.jpg)
DAYTONAfor Repair
I bought this one because I cry when I drop it.
Used for thruxtonrs.
The oval-shaped swing arm has a shallow hook.
If this is not possible, use a Y-shape.
View detail
Fits: KAWASAKI Ninja ZX-4R SE
M820WDController CT110 HUNTER CUB Brake folder Exactly for mounting
[How is it used?
MiVue M820WD Drareco Controller mounted in the Right SideBrake folder of the CT110 HUNTER CUB2BJ-JA55.
Although the name of the folder is Clutch folder, as shown in the product description photo, the folder can be attached to the Right Side Brake folder as well, effectively and securely.
Was the one you received as per Image?
Yes
Was the installation difficult?
It is easy. The angle of the brake lever changes when the brake folder fixing screw is loosened for installation. If you mark the current position before loosening the screw, you will not have to readjust it when assembling.
How was your experience with it?
It can be mounted securely, making it easy to work with Switch operation.
[Included Parts:were they on?
Yes. Matching mounting Bolt and collar are included and ready to install.
[Was there anything that disappointed you?
There is none. As expected.
▼ Requests
It would be easier to find a Brake folder if the name of the product listed is "Clutch holder...".
View detail
Daytona spool nut
Fits perfectly! View detail
It's secure
[How is it used?
Used for FrontCamera installation of the MiVue M820WD driver recorder.
CT110 HUNTER CUBFrontCarrier mounting bolt was co-tightened to the Bolt. Although this is not where it was originally intended to be used, it was securely installed.
Was the one you received as per Image?
Yes
Was the installation difficult?
Easy!
How was your experience with it?
I am satisfied with the image and no shaking.
[Was there anything that disappointed you?
Expected
View detail
It is a defense against all odds.
Chain locks between Wheels or between front wheel and Center Stand.
U-Lock is used for outings.
Chain is difficult to load and can be used at home.
It is unlikely to be destroyed by bolt cutter, and I think it is as defensible as military standard.
View detail
Helmet lock and Quantity:Set so very SMART!
After purchasing DAX125, I wanted to do something about the luggage space and helmet lock, so I installed DAYTONA's side bag support. If I use a larger bag, the Helmet lock will not work without a wire or something. View detail
Fits: HONDA Rebel1100, HONDA Rebel500, HONDA Rebel250
Easy to use
I purchased the Round Type because my ST250 has a circular swing arm. I am satisfied with it and can use it without any problem. View detail
Fits: HONDA CR125R, HONDA CRF150R, HONDA XLR200R, HONDA MTX200RII, HONDA XR230, HONDA FTR223D, HONDA FTR, HONDA SL230, HONDA XR250R, HONDA XR250 BAJA, HONDA XR250 MOTARD, HONDA XR250, HONDA XLR250R, HONDA XLR250RH, HONDA XLR250RF, HONDA FTR250, HONDA CRM250AR, HONDA CRM250, HONDA CRM250, HONDA CRM250R
Exactly to MOTARD as well.
Bought this for my drz400. For a long time, I had been wearing the one for my previous Large Motorcycle, but it was not so good because it was too loose. This time I bought it because it said "for Off-Road" and I am satisfied with the just fit. I also like that the lower part can be closed with a string. View detail
Nice detail but good ??
I like it because it's easy to dress up and immeChain ??
However, it sometimes hurts that most of the colors are out of stock….
View detail
Fits: SUZUKI GSX1300 HAYABUSA, HONDA CBR400R (2013-), HONDA CBR500R, HONDA CBR500R
Multi Bar with USB power supply for convenience
Quantity of Smartphone Holder:If set, the USB power supply can be conveniently located nearby. The installation can be safely used in conjunction with the key by connecting it to ACC.
Connected to DAYTONA Attachment Power Supply Unit D-UNIT.
View detail
For Side Back installation.
I tried to install it from the Left Side as a trial because I heard that it was designed for Side Back installation. The back is not visible when the back is installed, but it is solid and secure. View detail
Change your clothes according to your mood ^_^.
There are many colors to choose from, and you can change them according to your mood. View detail
Extra thick Chain lock!
I am using it with an earth lock in my yard. I had an accident when a neighbor ran over my Chain lock with his car (Truck) while I was parking my bike, but only the disc part was damaged and the ChainBody was not even scratched! The Chain lock is easy to use, strong and impeccable! The Chain lock is easy to use, sturdy and impeccable! View detail
Ideas products for improved serviceability!
I saw this product in DAYTONANews and bought it as soon as it went on sale.
I had a chance to do maintenance of CRF and SEROW's LINK circumference with just the right timing and used it immediately.
This tool is very easy to work with when pulling out and inserting the Axle Shaft and using it to assist in removing and installing the Wheel, as well as when slightly changing the angle of the Swing Arm for maintenance of the LINK circumference and adjusting it to a position where no excessive weight is placed on the LINK circumference.
When the Hook is hooked and pulled forward, the height of the Wheel is raised to just the right position, and the load can be set to Free, making it very easy to work with the Bolt around the LINK.
It is good to have one if you have many opportunities to service the rear wheel area.
View detail
![Motorcycle Drive Recorder "MiVue(R) M820WD" with GPS [Drive Recorder]](https://img.webike-cdn.net/catalogue/images/133360/20240315_daytona_driverecoder_sd_1080_1080_TS.jpg)
Pretty good
I don't know about other drarecorders, but it is a normal shot.
Command on Switch is easy to understand and the UserInterface of the application is very clear.
I feel that the parking monitor is less likely to be triggered by the weak battery in SR400. However, the engine is started within 5 KICKs.
View detail