Reviews
Fits: HONDA CB300R, HONDA CBR500R, HONDA NSR250R, HONDA CBR650R, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR400R (2013-), HONDA CBR250RR (MC22), HONDA CBR400R, HONDA CBR250RR (MC22), HONDA CBR250RR (MC22), HONDA CBR250RR (MC22), HONDA CBR250RR (MC22), HONDA CB250R, HONDA CBR250R (2011-), HONDA CBR250R (2011-), HONDA CB250R
It's neither good nor bad
I thought that I would like to install a camera in the middle and purchased it. I tried installing a smartphone for the time being, but checking the screen while riding is difficult when it is still stopped ^ ^;. The bar is not too short, not too long, just a good length. View detail
Fits: SUZUKI Zixer 150, HONDA CRF250RALLY, HONDA CRF250L, HONDA GROM, SUZUKI GSX-S125, SUZUKI GSX-R125, HONDA CRF250RALLY S, HONDA CRF250M, HONDA CRF250 RALLY LD, HONDA CRF250 RALLY, HONDA CB250R, HONDA CBR125R, HONDA CB125R, HONDA GROM, SUZUKI GSX-R125, SUZUKI GSX-S125, SUZUKI Gixxer 150., HONDA DAX125, HONDA CRF250 RALLY LD, HONDA CRF250L
Excellent ★ RearDisc Brake Pads ★ DAYTONARed Pad
I fall as a result of Right hand middle finger - ring finger - Small finger disability (paralysis) So, I started to use Rear brake a lot.
As expected it should be called DAYTONARed Pad.
I firmly depress Rear brake pedal firmly as much as weak force to hang Front brake.
But Tire locks are rare and it is possible to brace firmly.
For me the braking characteristics of this Red Pad is a very appreciative ability.
OEM's Pad (Blue) And other companies' BlackPad, my Rear brake usage is too effective and I can not deny Tire Lock every time I use it.
This Red Pad can be said to be Pad that Brake is easy to use and easy to operate Breaking.
This Red Pad has many dusts that occurred, but the surroundings of Caliper are black, but there is no problem with braking.
I occasionally hang a Carp Par with Parts Cleaner and wipe it with a Sponge and clean it up during my daily inspection.
The fact that Dust is likely to occur is also evidence that the load on Disc Lock is reduced by the wear and tear of Pad itself.
If you use this Red Pad, the burden on Disc Lock will decrease, so the disc life Life will increase.
Although it is easy to replace Pad, it is easy to replace Disc Lock, Jack will lift Motorcycle, remove Rim from Motorcycle, remove Disc Lock from hub, and exchange new Mounting Bolt when new Disc Lock is installed It is necessary to do.
Also, in the case of Rear, there is also Chain's tension and Alignment work thereafter.
Even if you use this Red Pad, eventually you will notice that Disc Lock will be worn out eventually and the timing of the exchange will be inevitable, but I am using this Red Pad and my Disc lock on my Motorcycle I'm counting that Large is durable in exchange after traveling 100,000 km.
With OEM's Blue or another company's Black's pad, if you do not measure the thickness of Disc Lock as bean from mileage of 30,000 km onwards, Disc Lock will become thin and it will cause deformation.
Please replace Disc Lock before the measured value falls below the specified value.
Once you experience the ease of braking operation of this Red Pad, unfortunately you can not go back to other colors anymore. (Lol)
.
View detail
Fits: YAMAHA MAJESTYS, YAMAHA MT-25, YAMAHA XSR900, YAMAHA MT-09, SUZUKI GSX250R, SUZUKI GSX250R, HONDA HORNET250, SUZUKI GSX250R, HONDA FORZA Si, HONDA FORZA Si, HONDA JADE, HONDA glom, HONDA VTR250, HONDA XR100MOTARD, HONDA PCX160, HONDA VTR250, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SUPER BOLDOR
If Bolt is Black, it is a perfect score
I am using it for MT07. We use this product for Right Side using NANKAI's KANIHolder for Left Side for Motorcycle with less Space around Handlebar. I am satisfied with making it well. Fixing to Clamp If Bolt is Black, it was nice to have a sense of unity - - -
View detail
Fits: HONDA CB400SF, HONDA CB400SF, HONDA CB400SUPER BOLDOR, HONDA NC750S DualClutchTransmission, HONDA CB400SUPER BOLDOR, HONDA CB400SUPER BOLDOR, HONDA CB400SUPER BOLDOR, HONDA CB400SUPER BOLDOR, HONDA CB400SUPER BOLDOR, HONDA CB400SUPER BOLDOR, HONDA CB400SUPER BOLDOR, HONDA CB400SUPER BOLDOR, HONDA CB400SUPER BOLDOR, HONDA CB400SUPER BOLDOR, HONDA CB400SUPER BOLDOR, HONDA CB650R, HONDA CBR250R (2011-), HONDA CBR250R (2011-), HONDA CBR250R (2011-), HONDA CBR600F
Nice quality dress-up part for my bike. The Oil Filler cap comes with the rubber o-ring and fits snugly in place. Very satisfied with product and WEBIKE team!
Nice quality dress-up part for my bike. The Oil Filler cap comes with the rubber o-ring and fits snugly in place. Very satisfied with product and WEBIKE team! View detail
Fits: YAMAHA MAJESTYS, YAMAHA MT-25, YAMAHA XSR900, YAMAHA MT-09, SUZUKI GSX250R, SUZUKI GSX250R, HONDA HORNET250, SUZUKI GSX250R, HONDA FORZA Si, HONDA FORZA Si, HONDA JADE, HONDA glom, HONDA VTR250, HONDA XR100MOTARD, HONDA PCX160, HONDA VTR250, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SUPER BOLDOR
It is a valid item for MT-07, which lacks space around the handle area.Though it is master cylinder clamp type, I was able to install it without difficulty.I believe there is no problem installing it alone, but since I wanted to eliminate vibration as
It is a valid item for MT-07, which lacks space around the handle area.Though it is master cylinder clamp type, I was able to install it without difficulty.
I believe there is no problem installing it alone, but since I wanted to eliminate vibration as much as possible to install my movie camera, I inserted a rubber bush to its fixed area.
*Bad points
I do not like the color of the installation screw (silver) which does not match with the product body color. I bought black screws of the same size at a DIY store and used them instead.
View detail
Fits: HONDA CB400SF, HONDA CB400SF, HONDA CB400SUPER BOLDOR, HONDA NC750S DualClutchTransmission, HONDA CB400SUPER BOLDOR, HONDA CB400SUPER BOLDOR, HONDA CB400SUPER BOLDOR, HONDA CB400SUPER BOLDOR, HONDA CB400SUPER BOLDOR, HONDA CB400SUPER BOLDOR, HONDA CB400SUPER BOLDOR, HONDA CB400SUPER BOLDOR, HONDA CB400SUPER BOLDOR, HONDA CB400SUPER BOLDOR, HONDA CB400SUPER BOLDOR, HONDA CB650R, HONDA CBR250R (2011-), HONDA CBR250R (2011-), HONDA CBR250R (2011-), HONDA CBR600F
I was looking for an oil filler cap for a long time and finally found the one that I want. There was no problem with the OEM cap, I just wanted to decorate the vehicle. I chose a M30 x P1.5. My model wasn't on the list of compatible models but it fits to
I was looking for an oil filler cap for a long time and finally found the one that I want. There was no problem with the OEM cap, I just wanted to decorate the vehicle. I chose a M30 x P1.5. My model wasn't on the list of compatible models but it fits to 2013 model KAWASAKI NINJA250. Just for reference.
It took a few days till it arrived and I couldn't wait. This surprised me because I 've never felt that way before. It arrived at night and I was excited till I mounted it on the next day. I wonder how they can offer such an awesome product at this price. It has great cost performance. I would buy it even if it cost 1000 yen more.
It's easy to mount. No tools are required. I had to loosen a section on the guard slider which took me 10 minutes but except for that it only took about a minute to replace. Same products manufactured by other companies require an O-ring separately, but this one comes with an O-ring which saves you trouble. It's good how you can install it the moment it arrives.
It also comes in a wide range of colors which will fit with the black colors of the engine surrounding. Just chose the color you like or the color that'll match your vehicle and you'll have no problem at all. I'm satisfied with the product and it is cheap enough to afford another one so that I can change it whenever I feel like it. It was a good buy.
View detail
Fits: HONDA VTR250, HONDA FTR223, HONDA FTR223, HONDA CB650R, HONDA CB400SS, HONDA CB223S, HONDA 400X, HONDA CB150R, HONDA CB300R, HONDA CB500F, HONDA CB500X, HONDA Rebel300, YAMAHA MT03, YAMAHA NMAX155, YAMAHA XSR900, YAMAHA MT-25, YAMAHA NMAX, YAMAHA MT-07, YAMAHA MT-09, HONDA MAGNA(V-TWIN MAGNA)
I've used to have a smart phone holder, installed it around the top bridge area, and used it as a navigation device.But, I often felt dangerous looking down for it, while driving my motorcycle.With this part, the smart phone position has becom
I've used to have a smart phone holder, installed it around the top bridge area, and used it as a navigation device.
But, I often felt dangerous looking down for it, while driving my motorcycle.
With this part, the smart phone position has become higher and I do not have to look down anymore.
Also, by tilting the smart phone holder, I can now take movies with may smart phone while driving.
Since it is directly installed on the mirror bracket the motion shakes a bit, but still it's acceptable.
View detail
Fits: HONDA CB400SF, HONDA CB400SF, HONDA CB400SUPER BOLDOR, HONDA NC750S DualClutchTransmission, HONDA CB400SUPER BOLDOR, HONDA CB400SUPER BOLDOR, HONDA CB400SUPER BOLDOR, HONDA CB400SUPER BOLDOR, HONDA CB400SUPER BOLDOR, HONDA CB400SUPER BOLDOR, HONDA CB400SUPER BOLDOR, HONDA CB400SUPER BOLDOR, HONDA CB400SUPER BOLDOR, HONDA CB400SUPER BOLDOR, HONDA CB400SUPER BOLDOR, HONDA CB650R, HONDA CBR250R (2011-), HONDA CBR250R (2011-), HONDA CBR250R (2011-), HONDA CBR600F
Although it was wavering, although the Parts of the good Dress-up up is also self-satisfied, a price feels it high an One-point Accent and how many colors to be good for a black Engine in red.
Although it was wavering, although the Parts of the good Dress-up up is also self-satisfied, a price feels it high an One-point Accent and how many colors to be good for a black Engine in red. View detail
Fits: HONDA VTR250, HONDA FTR223, HONDA FTR223, HONDA CB650R, HONDA CB400SS, HONDA CB223S, HONDA 400X, HONDA CB150R, HONDA CB300R, HONDA CB500F, HONDA CB500X, HONDA Rebel300, YAMAHA MT03, YAMAHA NMAX155, YAMAHA XSR900, YAMAHA MT-25, YAMAHA NMAX, YAMAHA MT-07, YAMAHA MT-09, HONDA MAGNA(V-TWIN MAGNA)
It is used in order to attach a smart phone Holder to Ninja250R.A using feeling in particular is satisfactory.Since the Screw is not attached although the official site also has a statement, it is necessary to prepare separately.(M ten P1.25) If I
It is used in order to attach a smart phone Holder to Ninja250R.A using feeling in particular is satisfactory.Since the Screw is not attached although the
official site also has a statement, it is necessary to prepare separately.(
M ten P1.25) If I have a Set about one Screw used although obtained simply in the
Home center etc., it will not take excessive time and effort..
View detail
Fits: HONDA VTR250, HONDA VTR250, HONDA VTR250, HONDA VTR250, HONDA VTR250, HONDA VTR250, HONDA VTR250, HONDA VTR250, HONDA VTR250, HONDA VTR250, HONDA VTR250, HONDA VTR250, SUZUKI GSX-S750, HONDA CB300R, HONDA CB150R, SUZUKI Gixxer SF 250, SUZUKI Gixxer 150., SUZUKI Gixxer 250, SUZUKI DL1000 V-STROM250, SUZUKI GSX250R
Since the leg became narrow taking advantage of having made CB1100 SC65 into the Separate handle, Step change was considered (the height of 180 cm is).Since a Back step was expensive, it purchased the Multi-step.It is only somewhat troublesome in attachme
Since the leg became narrow taking advantage of having made CB1100 SC65 into the Separate handle, Step change was considered (the height of 180 cm is).Since a Back step was expensive, it purchased the Multi-step.It is only somewhat troublesome in attachment to remove a split pin.The Bolt of the Change pedal also needed to be removed for removal of the
pure left Step.The Position to worry is satisfied very much, although set to the upper back.
photograph addition was carried out.
View detail
Fits: HONDA CBR250RR (MC22), HONDA CBR250RR (MC22), HONDA CBR250RR (MC22), HONDA CBR250RR (MC22), HONDA CBR250RR (MC22), HONDA CBR500R, HONDA CB300R, HONDA CBR400R (2013-), HONDA CBR400R, HONDA CBR250R (2011-), HONDA CBR250R (2011-), HONDA CB250R, HONDA CB250R, SUZUKI GSX1300 HAYABUSA, HONDA NSR250R, HONDA CBR650R, HONDA CBR600RR, HONDA CBR600RR
GSX-1300R -- a GSX1300R HAYABUSA -- attaching to 2005 models -- DAYTONA Multi bar holder Stainless-clamp DAYTONA Mount-kit phi13-14NANKAI KANI Series Flexible-clamp WNANKAI.KANI Series Four more than SMART Phone Porch AN PB-20
GSX-1300R -- a GSX1300R HAYABUSA -- attaching to 2005 models --
DAYTONA Multi bar holder Stainless-clamp
DAYTONA Mount-kit phi13-14
NANKAI KANI Series Flexible-clamp W
NANKAI.KANI Series Four more than SMART Phone Porch AN PB-20
are combined.Although it checked that it was written clearly that the bar holder and a Mount kit are correspondence vehicle types and being purchased, a problem is revealed after starting the attachment after thing arrival.
If it attaches in the regular direction, the bar itself does not have a problem, but the direction of a smart phone Porch interferes in a Tank bag ....A belly will be choked, if a Tank bag is shifted to the sheet side since it is unavoidable ....Since it was able to equip with it somehow when it found out whether 180 degrees of direction of the
bar would be changed, and it would reach, it was made such.However, since it goes into the back exactly and fixation is not carried out, it is due to reinforce with Weir etc.
View detail
Fits: HONDA CB400SF, HONDA CB400SF, HONDA CB400SUPER BOLDOR, HONDA NC750S DualClutchTransmission, HONDA CB400SUPER BOLDOR, HONDA CB400SUPER BOLDOR, HONDA CB400SUPER BOLDOR, HONDA CB400SUPER BOLDOR, HONDA CB400SUPER BOLDOR, HONDA CB400SUPER BOLDOR, HONDA CB400SUPER BOLDOR, HONDA CB400SUPER BOLDOR, HONDA CB400SUPER BOLDOR, HONDA CB400SUPER BOLDOR, HONDA CB400SUPER BOLDOR, HONDA CB650R, HONDA CBR250R (2011-), HONDA CBR250R (2011-), HONDA CBR250R (2011-), HONDA CBR600F
Since an authentic positive ones seemed unfashionable by the product made from a Plastic, it is exchange at the aluminum ware here (^-^) I used the product of the Silver.Since the Engine cover is painted by the Gray, it is satisfied as an One point (^.^)
Since an authentic positive ones seemed unfashionable by the product made from a Plastic, it is exchange at the aluminum ware here (^-^) I used the product of the Silver.Since the Engine cover is painted by the Gray, it is satisfied as an One point (^.^) It is not the conspicuous Parts so that he is surprised, but I think that it is good for a little Dress-up up (^.^) View detail
Fits: HONDA VTR250, HONDA VTR250, HONDA VTR250, HONDA VTR250, HONDA VTR250, HONDA VTR250, HONDA VTR250, HONDA VTR250, HONDA VTR250, HONDA VTR250, HONDA VTR250, HONDA VTR250, SUZUKI GSX-S750, HONDA CB300R, HONDA CB150R, SUZUKI Gixxer SF 250, SUZUKI Gixxer 150., SUZUKI Gixxer 250, SUZUKI DL1000 V-STROM250, SUZUKI GSX250R
Since the leg became narrow taking advantage of having made CB1100 SC65 K10 into the Separate handle, Step change was considered (the height of 180 cm is).Since a Back step was expensive, it purchased the Multi-step.It is only somewhat troublesome in atta
Since the leg became narrow taking advantage of having made CB1100 SC65 K10 into the Separate handle, Step change was considered (the height of 180 cm is).Since a Back step was expensive, it purchased the Multi-step.It is only somewhat troublesome in attachment to remove a split pin.The Bolt of the Change pedal also needed to be removed for removal of the
pure left Step.The Position to worry is satisfied very much, although set to the upper back.
View detail
Fits: HONDA CB300R, HONDA CBR500R, HONDA NSR250R, HONDA CBR650R, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR400R (2013-), HONDA CBR250RR (MC22), HONDA CBR400R, HONDA CBR250RR (MC22), HONDA CBR250RR (MC22), HONDA CBR250RR (MC22), HONDA CBR250RR (MC22), HONDA CB250R, HONDA CBR250R (2011-), HONDA CBR250R (2011-), HONDA CB250R
VTZ was processed although the fuse cover was attached on the Stainless, and attachment of it was completed well.After is completion when wiring a USB cable!!
VTZ was processed although the fuse cover was attached on the Stainless, and attachment of it was completed well.After
is completion when wiring a USB cable!!
View detail
Fits: HONDA CB300R, HONDA CBR500R, HONDA NSR250R, HONDA CBR650R, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR400R (2013-), HONDA CBR250RR (MC22), HONDA CBR400R, HONDA CBR250RR (MC22), HONDA CBR250RR (MC22), HONDA CBR250RR (MC22), HONDA CBR250RR (MC22), HONDA CB250R, HONDA CBR250R (2011-), HONDA CBR250R (2011-), HONDA CB250R
It purchased together with the Mount kit of the company.It is found useful very much as a Base which fixes iPhone5 and a Navigation. With no necessities, such as a System to carry out [ of 10,000 yen or more ]. Since there are , howev
It purchased together with the Mount kit of the company.It is found useful very much as a Base which fixes
iPhone5 and a Navigation.
With no necessities, such as a System to carry out [ of 10,000 yen or more ].
Since there are
, however height considerably, depending on a Holder, it will be considerably conspicuous.(Those of a Holder with in play)
View detail
Fits: HONDA Rebel300, HONDA CB300R, HONDA CB150R, HONDA REBEL500, Others , HONDA REBEL250, YAMAHA CYGNUS X, HONDA CB250R, HONDA CB250R, HONDA CB125R
It purchased in order to attach an Aqua prober with make ZEPHYR chi in 2001.It is a question to the conformity table of a Size.In a conformity table, although ZEPHYR chi is M18xP1.5, it is an error.In practice, it is M12xP1.5.Please give me correction!
It purchased in order to attach an Aqua prober with make ZEPHYR chi in 2001.It is a question to the conformity table of a Size.In a conformity table, although ZEPHYR chi is M18xP1.5, it is an error.In practice, it is M12xP1.5.Please give me correction!
If I attach a temperature sensor for an external Muffler, the code will have touched the Muffler.since -- the code was bent, and and it has protected. [ heat resistance ] [ cloth ]Those who are doing Muffler exchange are cautions.
View detail
Fits: HONDA VTR250, HONDA VTR250, HONDA VTR250, HONDA VTR250, HONDA VTR250, HONDA VTR250, HONDA VTR250, HONDA VTR250, HONDA VTR250, HONDA VTR250, HONDA VTR250, HONDA VTR250, SUZUKI GSX-S750, HONDA CB300R, HONDA CB150R, SUZUKI Gixxer SF 250, SUZUKI Gixxer 150., SUZUKI Gixxer 250, SUZUKI DL1000 V-STROM250, SUZUKI GSX250R
The exchange itself finishes simply.Since changed a fine Position, the using feeling which required time for the adjustment was good, and the Step severely criticized as severely obstructive also stopped worrying it at all by a Normal ste
The exchange itself finishes simply.Since
changed a fine Position, the using feeling which required time for the adjustment was good, and the Step severely criticized as severely obstructive also stopped worrying it at all by a Normal step.
It is since it becomes easy to apply a load in passing ^^ b
View detail
Fits: HONDA CB300R, HONDA CBR500R, HONDA NSR250R, HONDA CBR650R, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR400R (2013-), HONDA CBR250RR (MC22), HONDA CBR400R, HONDA CBR250RR (MC22), HONDA CBR250RR (MC22), HONDA CBR250RR (MC22), HONDA CBR250RR (MC22), HONDA CB250R, HONDA CBR250R (2011-), HONDA CBR250R (2011-), HONDA CB250R
It enabled it to attach a Universal holder in combination with its own Stainless mount.The diameter of mounting hole is 8 mm. Since it is a handy price, it is a Recommendation.
It enabled it to attach a Universal holder in combination with its own Stainless mount.The diameter of
mounting hole is 8 mm.
Since it is a handy price, it is a Recommendation.
View detail
Fits: HONDA CB300R, HONDA CBR500R, HONDA NSR250R, HONDA CBR650R, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR400R (2013-), HONDA CBR250RR (MC22), HONDA CBR400R, HONDA CBR250RR (MC22), HONDA CBR250RR (MC22), HONDA CBR250RR (MC22), HONDA CBR250RR (MC22), HONDA CB250R, HONDA CBR250R (2011-), HONDA CBR250R (2011-), HONDA CB250R
As the title, it purchased in order to equip the Items of a Handle clamp type. About engine performance, it is as appearance mostly. the feeling -- although an impression which is short is also carried out, if it is a Smartphone Holder, it can attach
As the title, it purchased in order to equip the Items of a Handle clamp type.
About engine performance, it is as appearance mostly.
the
feeling -- although an impression which is short is also carried out, if it is a Smartphone Holder, it can attach to one right and left at a time.
On the character of attachment, when a not much heavy thing is attached, it may move again depending on how to fasten.
The direction of a trouble thinks whether it is good to inquire by all means by a vehicle type to be processed big-ticket exclusive elegance and for attachment.
View detail
Fits: HONDA VTR250, HONDA VTR250, HONDA VTR250, HONDA VTR250, HONDA VTR250, HONDA VTR250, HONDA VTR250, HONDA VTR250, HONDA VTR250, HONDA VTR250, HONDA VTR250, HONDA VTR250, SUZUKI GSX-S750, HONDA CB300R, HONDA CB150R, SUZUKI Gixxer SF 250, SUZUKI Gixxer 150., SUZUKI Gixxer 250, SUZUKI DL1000 V-STROM250, SUZUKI GSX250R
[Webike Monitor] Although it has not come out, a Size is specified, there is nothing near, or the object for GB250 CLUBMANs is an inquiry to Mr. DAYTONA. About 2 mm of attaching parts I ask him to teach the Type which is likely to suit immediately to
[Webike Monitor] Although it has not come out, a Size is specified, there is nothing near, or the object for
GB250 CLUBMANs is an inquiry to Mr. DAYTONA.
About 2 mm of attaching parts I ask him to teach the Type which is likely to suit immediately to (very kind correspondence truly Mr. DAYTONA!) are deleted, a few is lowered to wearing and back, a little height is raised, and it becomes a Position which comes exactly.
Surprise which rides very easily by Step position changing!!
View detail