Reviews
carrying out workability good by moderate softness -- it is
carrying out workability good by moderate softness -- it is View detail
I utilized it on my old car!
The Hose Band was also included, which was a big help to us. View detail
First GSHose replacement in 7 years
The Fuel Hose of GB250 CLUBMAN has deteriorated and we decided to replace it.
We all know that regular replacement is a must, but we keep putting it off...!
I think this product is kind because it comes with a hose clip. I feel more satisfied with the elasticity of the new one than with the rigid and deteriorated one.
I know that deterioration of Rubber is inevitable, but since it is a double-layered structure, I expect it to be durable.
View detail
As per Spec. It looks thick and sturdy!
It was used for the modification to organize the tank to filter to carburetor. The outer diameter is as per the spec. and seems to be sturdy, but it is very difficult to handle. The attached fixed clip doesn't work at all. Even if it was made by another company, it wouldn't work. (Lol) View detail
To prevent foreign objects from entering
[How is it used?
I used it on my TZr250R.
We do have rust removal on the Fuel Tank and of course the Cook has a Filter, but we use it as an insurance policy to prevent as much rust and Garbage from flowing away.
Was the one you received as per Image?
If you have a vehicle with limited space, it's a good idea to check the installation position beforehand.
How was your experience with it?
Hose inner diameter is φ8mm, so I cut off the tip part with Cutter and then installed it.
I've only run the engine a little bit since installation, but so far the flow rate seems fine.
I can't confirm the visible foreign body etc. at the moment, but it seems to catch it well.
[Points to note]
If you just look at the Body, you'll want to put it on backwards, but the orientation is as shown in the picture.
I don't think it's a problem because it's in the description, but you need to check the mounting direction.
How did it compare to other products?
This is my first time installing a Filter, so I don't know about other products, but it's good that it can be used for both φ6 and φ8m, so it can be used in any car model.
【Review】
You don't have to measure every Hose inner diameter, but you can be sure to buy this product.
It seems that only Gasoline flow rate may be a problem, so you need to be careful there.
View detail
This is a normal product with no problems. Need to be replaced periodically
The discharge rate is not low and I have no problems using it.
When I did the rust removal of the Tank, I was worried and the net of Strainer of Fuel Cock had been removed. I thought this was Redn and installed it.
It's troublesome when Jet is clogged with a short Rust.
I think it needs to be replaced periodically, so it's like seeing how dirty it is.
View detail
Switch from Filter Paper Type
We have an ELIMINATOR 250, Tank rusty. I've been using Filter for a long time as a symptomatic treatment because it produces a lot of rust powder. Until now, I have been using the filter paper type for its filtration performance. I liked the filter paper type because it can filter rust like dust, but it reduces gasoline flow a little.
However, when I was driving on the highway the other day, a strange symptom of lack of Gas occurred. When I checked the cause, I found it was clogged filter paper.
So this time I decided to close my eyes to the filtration performance and use Mesh Type. So far, rust powder is not flowing so that it becomes a problem, and I can see rust accumulating in the bottom of Filter's Case, and I am satisfied with the feeling that it is removed.
The best thing is that this disk-shaped design fits the gap of the intake manifold of ELIMINATOR 250. Probably, ParallelTWIN of the same system of ZZr, GPX and so on will fit as if they were measured.
Satisfied for now
View detail
exchange
I bought and installed a new one because it was dirty and I was unsure when I installed it. I don't know when it was installed, but it was dirty, so I bought a new one and installed it.
It's not expensive, and it seems to perform well.
View detail
Hmmm, too bad!
LEAD 100, First Model Type does not have a fuel filter I installed it because it's an old car
Our LEAD has converted the carburetor to a PWK28, and the Manufacturer From Since the Paper Filtration Type is designed for high filtration capacity, the flow resistance is large You will need to check the Gasoline flow requirements for your motorcycle I was curious about the note that said...
We departed, despite my concerns, and there was no problem for a normal ride
Eventually the long climb came! 。 I drove with Axel at full throttle and stopped at around 300 meters when I suddenly had gas shortage symptoms The engine has stopped working as it was 。 You're done! When I turned the Cell long enough, Engine started normally I can run 。 When I checked the plug, it was white...
When I tried the same thing again, I found the symptoms of lack of Gas, so I guess this is not enough Gas So I removed the Fuel filter and tried the same thing again, and this time I was able to run
After all, at the PWK28th level, the flow rate is probably insufficient to keep up with the capacity
SmallEngine Displacement Volume makes it possible for Normal cabs to have Maybe it's just as well 。
View detail
It is Repeater
Every time I use it for carburetor's Fuel Hose handling.
I think that it will be easy to use and will be easy to use.
I think that it is even better if it is a little thinner.
View detail
Exchange with OEMHose
I bought this product due to degradation due to desorption of several tanks.
I was able to install without problems in particular.
The fact that comes with Clip has triggered the purchase.
View detail
It seems to be durable ○
I chose to replace the old Motorcycle Hose. It is flexible, easy to walk around, it is a strong impression. However, although it may be unavoidable, I thought that the color is plain or black is more comfortable. View detail
Used for C50 CUBDX
Carburetor was changed with the change to Chinese Engine. OEM needs this cook because carburetor and Cook are integrated. I am satisfied with the function as expected. As this price, it was easy to purchase. From Left to ON, RES, OUT. View detail
Well thought out functionality
The negative pressure Cook of AeroX is famous for being broken soon and my product has been used since it was broken without breaking by example.
At this price Gasoline's ON / I think that it is excellent that not only the OFF but also the ReserveCook is attached.
In my case IN / OUT reverse assembly is done so that it goes out of Gasoline with Reserve. It is useful for emergency GasolineShare and maintenance.
Also, since the Tap is cut off for installation and the "barb" for detent is also attached, if it fits well it is very convenient.
It is easy to combine with Universal Bracket which is also sold at home center etc, so it is perfect for remodeling.
Unfortunately, the switching of Cook is sweet, even if you turn it off, it will leak a bit.
Another one, because Plate with switch indication is not Stainless Steel, it rusts right away.
As a digression, Yamaha OEM No. : It seems to have the same shape as Fuel Cock of 5N7-24500-00.
View detail
To Oil pumpHose
To use for Oil pumpHose of yamaha series 2Cycle, purchase. Oil pump internal GEAR was damaged beforehand and fragments were hooked on one carburetor side Oil line, Oil could not refuel and seizure Piston cracked. By using this semi-transparent Hose we recommend you to take measures as Oil can be found in Hose.
Because 2 strikes are becoming priceless too, Large each Parts ....
View detail
Firm making
I think that there is no problem with quality because it is a reliable Brand
I got a lot bigger than I imagined
In Mini bike I thought that securing Space seems to be Large.
The price is reasonable
View detail
used for the VT250 SPADA of a Honda -- since it was an old vehicle type, there is hardening -- a measure -- since it was a Type cut by it although considered and exchanged, it could exchange by required die length and was saved [ who was able to use
used for the VT250 SPADA of a Honda -- since it was an old vehicle type, there is hardening -- a measure -- since it was a Type cut by it although considered and exchanged, it could exchange by required die length and was saved [ who was able to use having felt easy without the leak etc. ]
View detail
It attached to the motorized Motorcycle purchased in medieval times.The Tank is old, and although inflow of rust was anxious, it is safe for a while now. However, it does not become fundamental solution.
It attached to the motorized Motorcycle purchased in medieval times.The
Tank is old, and although inflow of rust was anxious, it is safe for a while now.
However, it does not become fundamental solution.
View detail
At the time of the Overhaul of a carburetor, since the Hose had adhered to, it exchanged for the new article. -- cheap -- carrying out -- quality -- merit that's right. If durability of the rest is good, it will be O United and will equip also
At the time of the Overhaul of a carburetor, since the Hose had adhered to, it exchanged for the new article.
-- cheap -- carrying out -- quality -- merit that's right.
If durability of the rest is good, it will be O
United and will equip also with a Filter.
that it looks well says -- it is -- !.
-- there was a deal of rust of a Tank, since it was old vehicles, since that was right, it equipped for prevention, but it is beautiful in it being unexpected.
View detail
The best for carrying out fuel-level adjustment of a Carburetor-float room as well as the ability to use ordinarily.
The best for carrying out fuel-level adjustment of a Carburetor-float room as well as the ability to use ordinarily. View detail