Reviews
power generator
Used on an old generator, the new Daiwa EG650 Mytee Power. I really wanted a different O.D. size (5.5mm) on the opposite side of the 8mm O.D. because I could not find an OEM Fuel Cock, but it works fine and I am satisfied. View detail
carrying out workability good by moderate softness -- it is
carrying out workability good by moderate softness -- it is View detail
choice goods
Thank you for the fast response.
Immediately replace the old one
I did
I look forward to working with you again when the opportunity arises.
View detail
I utilized it on my old car!
The Hose Band was also included, which was a big help to us. View detail
First GSHose replacement in 7 years
The Fuel Hose of GB250 CLUBMAN has deteriorated and we decided to replace it.
We all know that regular replacement is a must, but we keep putting it off...!
I think this product is kind because it comes with a hose clip. I feel more satisfied with the elasticity of the new one than with the rigid and deteriorated one.
I know that deterioration of Rubber is inevitable, but since it is a double-layered structure, I expect it to be durable.
View detail
As per Spec. It looks thick and sturdy!
It was used for the modification to organize the tank to filter to carburetor. The outer diameter is as per the spec. and seems to be sturdy, but it is very difficult to handle. The attached fixed clip doesn't work at all. Even if it was made by another company, it wouldn't work. (Lol) View detail
Easy to use
Used to bleed air from brake and clutch fluid.
It is resilient and can be adjusted to the desired length, so work can be done efficiently and conveniently.
View detail
insufficient flow
The product is solidly built, but the amount of flow to the carburetor is less than that of KIJIMA's products of the same et cetera, and it is easy to cause gas deficiency. I am concerned about it and it is Stress. So I changed to another Filter. I am sorry to hear that. View detail
To prevent foreign objects from entering
[How is it used?
I used it on my TZr250R.
We do have rust removal on the Fuel Tank and of course the Cook has a Filter, but we use it as an insurance policy to prevent as much rust and Garbage from flowing away.
Was the one you received as per Image?
If you have a vehicle with limited space, it's a good idea to check the installation position beforehand.
How was your experience with it?
Hose inner diameter is φ8mm, so I cut off the tip part with Cutter and then installed it.
I've only run the engine a little bit since installation, but so far the flow rate seems fine.
I can't confirm the visible foreign body etc. at the moment, but it seems to catch it well.
[Points to note]
If you just look at the Body, you'll want to put it on backwards, but the orientation is as shown in the picture.
I don't think it's a problem because it's in the description, but you need to check the mounting direction.
How did it compare to other products?
This is my first time installing a Filter, so I don't know about other products, but it's good that it can be used for both φ6 and φ8m, so it can be used in any car model.
【Review】
You don't have to measure every Hose inner diameter, but you can be sure to buy this product.
It seems that only Gasoline flow rate may be a problem, so you need to be careful there.
View detail
Select the carburetor to be used depending on the flow rate.
When I use this filter on a Motard 115 with PE24, I don't get any air bites in the filter if I don't open it all the way, but if I pull it all the way, the gasoline supply can't keep up with the filter and it's completely useless.
It is not suitable for the car that uses the fuel cock of the fuel hose of φ6, so it is necessary to pay attention.
View detail
This is a normal product with no problems. Need to be replaced periodically
The discharge rate is not low and I have no problems using it.
When I did the rust removal of the Tank, I was worried and the net of Strainer of Fuel Cock had been removed. I thought this was Redn and installed it.
It's troublesome when Jet is clogged with a short Rust.
I think it needs to be replaced periodically, so it's like seeing how dirty it is.
View detail
You can use it immediately.
Universal's Fuel Hose.
With Clip, you don't have to make separate arrangements and can use it immediately.
Even with the addition of fuel filters, etc., the hose can be made Exactly the same length as the OEM Product without any discomfort.
It is easy to forget about the maintenance of the hoses, but the worst case scenario is that they will burn while running, so it is important to take care of them as soon as possible.
View detail
Filter
I've installed it to prevent garbage from getting into my car, and I don't have any problems, but it's a bit large. I think it is a little large;
This is a spare, next purchase for Replacement.
I would like to buy something else next time and try it.
View detail
Used as Drain hose on old carburetor
I bought this for my Motorcycle Restore. It says it is not Gasoline resistant, but I bought it because it says it is for carburetor drain hose. It is good that the color can be chosen by two colors. I was a little confused and decided to go with Green. View detail
ได้รับสินค้าครบถ้วน สินค้าใหม่ แพ็คมาดี...ตามที่โฆษณา ราคาเป็นที่พึงพอใจ เชื่อถือได้คุ้มค่า จัดส่งถือว่ารวดเร็ว การให้บริการจากทางร้านค้าดี View detail
It is made by KEDO.
I replaced the Gasoline leak on the Normal cook because it happened.
I was interested in KEDO's products and bought this one.
It's pretty well built. It's also easy to operate. It's rather expensive, but you can't go wrong with it.
good point
Easy to install, just replace the NORMAL unit.
No problems at all after a year of use. Expectations for durability.
●Packing, a complete set of pedestal is also available.
I've been using it for a few years now, and it's been great.
It's very well made.
A bad point
The price is high.
As they deteriorate over time, there will be problems here and there.
The fuel cock is in constant contact with the gasoline, so the deterioration is obvious.
I've used a few KEDO parts and they are really good.
View detail
Switch from Filter Paper Type
We have an ELIMINATOR 250, Tank rusty. I've been using Filter for a long time as a symptomatic treatment because it produces a lot of rust powder. Until now, I have been using the filter paper type for its filtration performance. I liked the filter paper type because it can filter rust like dust, but it reduces gasoline flow a little.
However, when I was driving on the highway the other day, a strange symptom of lack of Gas occurred. When I checked the cause, I found it was clogged filter paper.
So this time I decided to close my eyes to the filtration performance and use Mesh Type. So far, rust powder is not flowing so that it becomes a problem, and I can see rust accumulating in the bottom of Filter's Case, and I am satisfied with the feeling that it is removed.
The best thing is that this disk-shaped design fits the gap of the intake manifold of ELIMINATOR 250. Probably, ParallelTWIN of the same system of ZZr, GPX and so on will fit as if they were measured.
Satisfied for now
View detail
Required if you change carburetor in CUB
Used when the CUB was converted to an OEMPB13→PC18.
When you change the carburetor, you have to change the Fuel Cock too.
good side
The shape is easy to operate, so it is easy to switch between ON, OFF, and PRE.
It's easy to install with L-shaped brackets sold at home centers.
Easy to disassemble, easy to overhaul, and easy to repair.
The oil filter is inside so it can remove some of the impurities in the gasoline.
A bad point
It's not easy to find Fuel Hose, Brackets, etc. on your own. It's fun for me.
It's not easy to install, but it's a must have part for carburetor replacement.
View detail
exchange
I bought and installed a new one because it was dirty and I was unsure when I installed it. I don't know when it was installed, but it was dirty, so I bought a new one and installed it.
It's not expensive, and it seems to perform well.
View detail
It is useful for air venting.
The hose that came with the vacuum cleaner was too short to be used, so I used it for the air venting of Brake and Clutch fluid. View detail