Reviews
These are parts that are recommended to be replaced periodically rather than becoming a troublemaker due to motorcycle malfunctions.
The story of the phenomenon to the replacement of parts
When I was riding in the city, Stop and go repeatedly in winter, the temperature of the water temperature gauge exploded.
Normally, the temperature would start at 100°C and then rise to 105°C with the cooling fan running, but the temperature has now hit 110°C. The cooling system warning lamp comes on... I don't understand! Finally, the warning lamp for the cooling system comes on... I don't understand why!
Cool-down at normal speed with running wind, warning Lamp off, temperature suddenly drops below 100°C, and cooling fan stops.
When waiting at a traffic light, the water temperature gauge rises and exceeds 100°C!
Later, upon inspection, the coolant reserver tank was replenished to the upperLevel based on its depletion.
The next day, I found some kind of liquid leaking from the bottom of my parked Motorcycle! The next day, we found some kind of liquid leaking from the bottom of the parked motorcycle!
It did not look or feel sticky like oil, it did not smell like volatile organic compounds, and it felt watery…, so I suspected it was coolant!
Not a leak from the Oil pan? I guessed it is probably draining from the Overflow Pipe.
I couldn't be sure because I haven't seen the phenomenon….
Every so often, the stain under the Motorcycle, which was left on the bicycle parking lot, evaporated or disappeared without a trace.
A few days later, we see the same phenomenon again.
Even though the Motorcycle is not running, it is leaking, isn't it? Is it a mystery in your head?
I sought out what I could do on my own and arrived at, Radiator cap This is an exchange of
[How is it used?
I bought an inexpensive Other Brand Product because I don't think it has been replaced since Motorcycle purchase.
Was the one you received as per Image?
The item was exactly as shown in the picture.
Was the installation difficult?
Only remove and install the panel on the Right Side of the Front.
I wonder if it is an individual difference of the Radiator cap, but when I install it and turn it, it is so hard that I cannot turn it without using a tool.
How was your experience with it?
Compared to OEM products, other brand products are cheaper, but the quality and materials of the products are cheaper.
[Included Parts:were they on?
There was nothing in particular
[Was there anything that disappointed you?
The point where installation could not be done easily.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
Instruction manuals are available for reference, such as no service manuals.
Might be difficult without a certain level of knowledge and skill?
View detail
Fits: KAWASAKI ER-4n, KAWASAKI 1400GTR CONCOURS14, KAWASAKI 1400GTR, KAWASAKI ER-6f, KAWASAKI ER-6n, KAWASAKI MEGURO K3, KAWASAKI Ninja 1000, KAWASAKI Ninja 1000SX, KAWASAKI Ninja 250, KAWASAKI Ninja 250, KAWASAKI Ninja 400, KAWASAKI Ninja ZX-10R, KAWASAKI Ninja ZX-10R, KAWASAKI Ninja ZX-10R, KAWASAKI Ninja ZX-10R, KAWASAKI Ninja ZX-10R SE, KAWASAKI Ninja ZX-10RR, KAWASAKI Ninja ZX-10RR, KAWASAKI Ninja ZX-14R, KAWASAKI Ninja ZX-25R
I want to use something a little better.
I haven't used it yet, but it looks like a bit of a good Filter, so I bought it.
Package was changed from the image to a box.
View detail
Fits: SUZUKI Gixxer 150., SUZUKI Gixxer 250, SUZUKI BURGMAN400, SUZUKI BURGMAN400, SUZUKI BURGMAN200, SUZUKI SKYWAVE400 burgmanType S, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgman, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE400 burgman Type S, SUZUKI VECSTAR150, SUZUKI GEMMA250, SUZUKI VECSTAR125, SUZUKI ADDRESSV125S, SUZUKI ADDRESSV125LIMITED, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125SS, SUZUKI ADDRESSV125 G8, SUZUKI V-STROM250SX, SUZUKI GSX-S125
Please come once every two times Large body Oil change!
I replaced it at the same time (this is the 3rd time) when replacing the Oil in DL1000 V-STROM250SX.
It seems that about 1 Filter per 2 Oil changes is good. Probably ^^;.
Finally, DL1000 V-STROM250SX is now officially applicable for DL1000 V-STROM250SX, although until recently it was only ridden for JigSar.
At this price, it would be ideal if the Packing system was also included.
The sense of use was naturally worked at the same time as Oil replacement, so you can't tell if it works or not.
We are not going to be able to save this kind of money and have it go bad as a result, so we will be able to make the best use of it.
Replace them regularly. I'm sure it works...I don't know.
View detail
Quantity:Set is convenient
Quantity so you don't get lost when buying.:Set sales are very convenient View detail
![[Repair/Optional Parts] Replacement Drain Bolt Gasket M10](https://img.webike-cdn.net/catalogue/images/103032/25974_TS.jpg)
Gasket
OEM Product is a little expensive, so here is a substitute.
It is aluminum, so it has an appearance, but if it can be sealed, it is not a problem, so I thought the low price was a good thing.
View detail
with Magnet
I bought this to replace Oil's Screw for Drain with MagnetBolt.
It's not that expensive, it's brand new and it's beautiful now.
Steel, so I guess it won't be clean next time I change the Oil….
Magnet, we are looking forward to iron powder Catch in Oil and see how it goes for a while.
View detail
Fits: DUCATI DESMOSEDICI RR, DUCATI DIAVEL CARBON, DUCATI DIAVEL DARK, DUCATI DIAVEL STRADA, DUCATI DIAVEL, DUCATI GT1000, DUCATI HYPERMOTARD 1100 evo SP, DUCATI HYPERMOTARD 1100 evo, DUCATI HYPERMOTARD 1100, DUCATI HYPERMOTARD 1100S, DUCATI HYPERMOTARD 796, DUCATI HYPERMOTARD 939 SP, DUCATI HYPERMOTARD 939, DUCATI HYPERMOTARD SP, DUCATI HYPERMOTARD, DUCATI HYPERSTRADA 939, DUCATI HYPERSTRADA, DUCATI MH900E, DUCATI MONSTER 1000 DARK, DUCATI MONSTER 1000 S
OEM and Filter wrenchSize are different.
I used it on a DucatiMULTISTRADA 1000DS that I bought used.
We don't know when the Oil Filter was replaced, so we replaced the Oil Filter as well, just in case.
MULTISTRADA 1000DS is a so-called air-cooled DesmoEngine, so the same kind of engine has been used for a very long time.
I think all SS900, Monster series and even HYPERMOTARD1100 or so can be used together, maybe SCRAMBLER1100 too.
I honestly don't know about the functionality, I haven't felt any difference in filter performance, but I'm sure it will be large and sturdy since it is DAYTONA under the sun.
One point that is unexpected.
DAYTONA Oil Filter for Ducati is different from OEM Oil Filter in wrench size.
In other words, the filter wrench for OEM can remove the OEM Oil Filter, but cannot tighten the DAYTONA Oil Filter….
The Filter wrench that can be used for this Oil Filter appears to be FOR HARLEY.
Since I was in a hurry, I tightened the brown by hand with full power (I tightened it later with another Daytona Oil filter wrench).
View detail
Fits: その他 , HONDA CB1300SUPER BOLD'OR, HONDA CB1300SUPER BOLD'OR SP, HONDA CB1300SUPER FOUR, HONDA CB1300SUPER FOUR SP
The magnet!
When I was looking for a drain washer to change the oil, I found this one and bought it because there was only about a 100 yen difference between the one with magnet and the one without. I am not sure yet if the performance is as good as the product description, but I have high hopes for it. View detail
periodic replacement
I installed it to prevent foreign matter from entering the tank, and it is about time for regular replacement. The price is not that much, I can see how dirty it is, and it is easy to replace, so I think it is easy to use. View detail
Fits: SUZUKI GS1200SS, SUZUKI GSF1200S, SUZUKI GSF1200ST, SUZUKI GSF1200V, SUZUKI GSF1200SV, SUZUKI GSF1200SAV, SUZUKI GSF750, SUZUKI GSR250, SUZUKI GSR250F, SUZUKI GSR250S, SUZUKI GSR400, SUZUKI GSR400, SUZUKI GSR400, SUZUKI GSR750, SUZUKI GSX-8S, SUZUKI GSX-R1000, SUZUKI GSX-R1000, SUZUKI GSX-R1000, SUZUKI GSX-R1000, SUZUKI GSX-R1000
usually
It is an ordinary Oil Element.
I cannot tell the difference from other products.
View detail
Fits: KAWASAKI ER-4n, KAWASAKI Ninja 1000, KAWASAKI Ninja 1000SX, KAWASAKI Ninja 400, KAWASAKI NInja400R, KAWASAKI VERSYS1000, KAWASAKI Z1000, KAWASAKI Z900, KAWASAKI Z900SE, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS SE
Periodic Maintenance
Filter is replaced every two Oil exchanges.
I don't feel that this has improved anything, but I do it as a part of maintenance to keep on riding.
View detail
Fits: SUZUKI VOLTY, SUZUKI VOLTY, SUZUKI VOLTY, SUZUKI VOLTY, SUZUKI VOLTY, SUZUKI VOLTY, SUZUKI GRASS TRACKER, SUZUKI GRASS TRACKER, SUZUKI GRASS TRACKER, SUZUKI GRASS TRACKER, SUZUKI GRASS TRACKER, SUZUKI GRASS TRACKER, SUZUKI GRASS TRACKER Big Boy, SUZUKI GRASS TRACKER Big Boy, SUZUKI GRASS TRACKER Big Boy, SUZUKI GRASS TRACKER Big Boy, SUZUKI GRASS TRACKER Big Boy, SUZUKI GRASS TRACKER Big Boy, SUZUKI ST250, SUZUKI GRASS TRACKER Big Boy
Difficult to fix Screws that are larger than OEM
When replaced, Screw fixation was difficult.
The OEM screw was supposed to be used, but it was not long enough, so we managed to fix it with the included screw.
View detail
It's time to change.
It has been two years since the last installation, so I purchased this product so that I can replace it with a new one if it looks too bad at the time of maintenance.
If it doesn't seem that bad, we plan to keep it as a spare.
View detail
Fits: KAWASAKI Ninja 250, KAWASAKI VERSYS X 250, KAWASAKI VERSYS X 250TOURER, KAWASAKI Z250
Costa is good.
This is my first purchase of Replace and I think the quality is fine.
However, I could not use it with zx-25r because the Packing Size of Oil Filler Cap was different. So I gave it ×3 stars. Other than that, I think it is a good product.
View detail
Fits: HONDA 400X, HONDA 400X, HONDA BROSProduct1, HONDA BROSProduct2, HONDA CB-1, HONDA CB-1 TYPEII, HONDA CB1000R, HONDA CB1000R, HONDA CB1000SF, HONDA CB1000T2, HONDA CB1100, HONDA CB1100SE, HONDA CB1100EX, HONDA CB1100BLACKSTYLE, HONDA CB1100RS, HONDA CB1100E Package, HONDA CB1100RS Final Edition, HONDA CB1100EX Final Edition, HONDA CB1300 SUPER TOURING, HONDA CB1300SF
Purchased for 778
Replacement for 67926? Purchased with the following information.
I know you want to organize the part numbers, but a normal search by Motorcycle's name would bring up the higher end Filters, and I thought the method was too stingy.
The quality is made by DAYTONA and I have been using it for about 60,000 km so far while replacing it and I have never had any problems!
Be careful not to mistake the part number for the corresponding car model!
View detail
Don't get wet.
I don't think it's Completely Waterproof, it breaks, but it's easy to use and cost-effective, so if it breaks again, I'll replace it. View detail
Standard Type = OEM same etc. not?
Purchased the Standard Type. If you consider it as a substitute for OEM product, not for power up, you may have preferred the fine type. View detail
Fits: HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA monkey, HONDA monkey, HONDA monkey, HONDA monkey, HONDA monkey, HONDA monkey
22499
I will write a review based on the fact that my friend has a similar kit from "Kitaco" I really liked the convenience that comes from hexagonal hats. The disadvantages of "Kitaco" is a smaller number of screws in the kit and a slightly higher price. In this kit, the quality of the metal is somewhat worse, the design of the hats is also worse. And the most important thing is that in this kit I did not find a screw for the lid on the left, all the screws are either longer or shorter. Unfortunately, I can't recommend this kit, it's better to pay more and take "Kitaco". View detail
Fits: HONDA CBR600RR, HONDA CROSSCUB110, YAMAHA CYGNUS X, HONDA CT125, HONDA CRF250RALLY S, HONDA CRF250RALLY, HONDA CBR600RR, HONDA CB400SUPER BOLDOR, HONDA CB400SUPER BOLDOR, HONDA CB400SUPER BOLDOR, HONDA CB400SUPER BOLDOR, HONDA CB400SUPER BOLDOR, HONDA CB400SUPER BOLDOR, HONDA CB400SUPER BOLDOR, HONDA CB400SUPER BOLDOR, HONDA CB400SUPER BOLDOR, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF
Just the way it looks.
Just remove the OEM Cap and replace it.
Since there is no oil level gauge, we recommend that OEMs keep it instead of discarding it.
View detail
Poor quality of the Rubber part
Used with ADDRESS V100.
Installed in November 2022, stored at Garage and not run in the rain.
After only a little over 6 months, the Rubber part is already covered with Cracks all over.
It's a shame because FilterBody is very nice.
I bought it with trust because it is a DAYTONA product, but anyway, the quality of the rubber is too bad.
If it were cheaper, I would buy it again and replace it exactly, but the FilterBody is still usable, so I am Repairing it by wrapping Vinyl Tape around the entire Rubber.
Since you are such a great Filter, please use a better quality Rubber.
The Image of DAYTONA products has fallen in my mind.
Incidentally, V100 (Normal cab) The Clearance with the Rear tire is the Limit when the tire is installed on a
The smallest Fender at the original carburetor cannot be attached without some modification to the FenderBody.
Without this Fender, the Tire is going to Directly suck in Garbage and dust picked up by the Tire.
View detail