Reviews
fall (e.g. in status)
Slip. I thought it was an initial slip, but it slides.
And a familiar Motorcycle shop. I'm going to ski DAYTONA. I would recommend OEM because OEMMEMBelt is expensive but you don't have to buy cheap.
View detail
Not at all.
This is no good, I wanted to use the thin ones from the Pin Cutter and bought them, but they break easily. Even when I held the hole position firmly in place, it didn't work. In fact, I borrowed a friend's and tried to cut the Chain and it bent. I bought it as a substitute, but it was also bent. It's no good...it's very rare that it's no good for a DAYTONA. View detail
Fits: HONDA Spacey 100, HONDA Spacey 100, HONDA Spacey 100
Manufacturer dealers not compatible with each other. It is better not to purchase 63430 part number for a while.
After returning for 1 month from purchase and returning returns. As long as the belt 1 pc took too much time? Since the condition of this time seems unlikely and it seems that the reason is still unknown due to the answer from all Manufacturer who is negligibly around, we are in the process of inquiry, It is better not to purchase current stock items. Ha Gap is likely to come. I have not inspected it.
In this case DAYTONA, I realized that quality control got worse again.
It is like an amateur is dealt with by the ambiguous, it is early to sell, the complaint correspondence is delayed contact inquiries and it is urgent and it is urgent to contact here. I felt that the correspondence became considerably worse for the Webb.
View detail
Fits: HONDA Spacey 100, HONDA Spacey 100, HONDA Spacey 100
P.S.
On the day after I got it here, I happened to get items of the same part number in the neighbor 's PartsSHOP, even on Amazon and measured it. Unfortunately it seems that the width of the thing of 63430 product number which is currently on sale has changed. Because we purchase three in separate places and this result, the current sales lot is OEM normal width 18. There may not be anything close to 5 mm. Things purchased at Amazon and SHOP shops can be returned, but Mr. Webik is likely to change its response depending on the Manufacturer response.
I'm afraid I will get an OEM or another Manufacturer.
View detail
Fits: HONDA Spacey 100, HONDA Spacey 100, HONDA Spacey 100
I hit a defective product for the first time in 20 years.
Although I have been using Belt of DAYTONA for twenty years from the school days up to the present, the size was a stable item with no difference in the size even compared with the OEM Product, but it was the first time for a defective item. Although the length is OK, the width is 0 compared to the normal dimension of the OEM Product. It was 7 mm thin and was in a state where there was no meaning to replace that it was thinner than the used item of the same part number that we used to date. I hope I just pull Hap Gap, but I pray that accuracy and quality control are not the result of being sweet. View detail
This is not it.
Almost the same thing to Mono ◯ wax, it is usually sold at 4790 yen and under half price... Those who are considering purchasing will definitely recommend that... Disappointed - - - View detail
Fits: YAMAHA Cygnus X 19, YAMAHA Axis Street, YAMAHA Axis Street, YAMAHA Axis Street, YAMAHA Axis Street, YAMAHA Cygnus X FI, YAMAHA Cygnus X FI, YAMAHA Cygnus X FI, YAMAHA Cygnus X FI, YAMAHA Cygnus X FI, YAMAHA Cygnus X FI, YAMAHA Cygnus X FI, YAMAHA Cygnus X FI, YAMAHA Cygnus X SR, YAMAHA Cygnus X SR, YAMAHA Cygnus X SR, YAMAHA Cygnus X SR, YAMAHA Cygnus X SR, YAMAHA Cygnus X SR, YAMAHA Cygnus X SR
Bad quality
I bought a high power pulley at a neighborhood nappus, and at the same time I replaced a Daytona slide piece, reinforced V belt with a new one. Slide rib inside sliding piece and high power pulley (3 places) There is no clearance at all, the slide pulley and the clamp plate caught from the start, the engine only blows and the accelerator can not be fully opened. Finally I got the high power pulley replaced by Naps, but as a result I can not use the Daytona made slide piece as it is, scrap inside the slide piece and use it 0. It is a choice whether to use a small 5-mm-sized slide piece made by Kitako, separately purchase a slide piece made by Kitako to eliminate the catch. However, even if the accelerator is fully opened in the vicinity of 30 to 40 Km, engine blowing is bad, when confirming removal of the high power pulley, the Teflon coat is peeled off while traveling 100 km, the slide piece is caught in the slide rib and the blowing is bad Also known. Here, peeling off all the teflon coat of the slide ribs, the problem was solved by mirror-polishing the surface of three ribs with poor precision. In addition, acceleration of the attached weight roller 13 g does not differ much from the normal at the intermediate speed from the start, there is a possibility that if we change the weight roller to 12 to 11 g, we want to try. Under present circumstances it is better to insert 14 to 13 g of weight rollers into the genuine pulley. (The maximum speed is around + 10 Km with the meter reading) When exchanging defective products, all the work costs are burdens on the purchaser, and it is a tuning part that can not be recommended absolutely. View detail