Reviews
No damage to the vehicle body.
The price is cheap and it's good because it doesn't hurt the wirings of the vehicle.
I think it works well for Simple vehicles.
There are a lot of vehicles that damage the wiring of the vehicle and take the power supply forcibly, and it was so in the installation of the ETC etc. of a certain shop, but it does the work that can become a fatal wound.
The person who does the work has not experienced the later Trouble, so they are fine with it.
There are a lot of self-proclaimed Pro mechanics who do terrible work, so if you install it as a power supply first, it will prevent Trouble.
This time I bought it for ETC installation, but I think it's convenient because it can take 3 systems.
The quality of the product is simple, so it is unlikely to become a problem if it is installed with understanding.
View detail
Taking out the power supply just got a whole lot easier!
It is quite troublesome to find and connect the power supply for the main key when you add the electrical components for your motorcycle. Also, it is very bulky to connect a lot of wires to the battery terminal. The body is a little bit large, so it was hard to find a good place to install this product, but the wiring is clean and I can easily get the power supply even if I add more electrical components in the future. I wonder what kind of electric parts I should put on next. View detail
Compact and waterproof is good
Even if the space is limited like Ninja H2, it is possible to install with room. The satisfaction is high because it is Small Type&Waterproof than a normal D-unit. View detail
Now even a beginner can enjoy electrical component DIY!
Wiring to USB power supply was done at the time of Motorcycle purchase, but I stepped into the D-UNIT installation from the fact that I was thinking about the installation of the Dramatic Recorder and the fact that I was rewiring the electric heating wear in winter.
Before installation, I didn't know what the wiring was, so I asked at the shop, and once I found out where the acc power supply was, I just followed the instruction manual, and I didn't have any trouble.
I replaced the Bullet Terminal of the acc power supply because it was loose as shown in someone's Review.
Because the electric heat Wear was 4A with the terminal of Round Type, I replaced Fuse and installed it.
The USB power supply was connected, and Wiring was Refreshingly put together.
After this, I'm thinking of installing a drrorecorder, but for a beginner, if I don't know how to get the power supply, I'll have to ask the shop to do it, and I was thinking that it would cost a lot of labor, so I'd like to have fun with DIY.
View detail
Revolution in power extraction
[How is it used?
I used it to take out the power from Battery when I installed Fog Lamp.
I'm glad that I can branch out because there was a possibility that I might have to put on a Dramalec.
And I am looking forward to the water resistance that is the feature of the most Large.
Was the one you received as per Image?
As per Image. The impression that Package was Large than I thought.
Was the installation difficult?
Removing the power supply was very easy, just plug it into the battery terminal or press the button.
What was difficult to understand was the extraction from the Fuse box. How many Ampere Fuse boxes should I take out? Do I have to do anything for resistance? And so on.
Between the D-Unit and Battery, I have a 10A location for Emon's "Mini Flat Type Fuse Power. I let him bite the
https://www.webike.net/sd/1353356/
How was your experience with it?
I installed it in a place where the batch would get wet in the rain. (Or, more accurately, I had to.)
I drove it for a few hours in a typhoon and had no problems at all.
[Included Parts:were they on?
As you can see in the picture, it comes with quite a lot of stuff, I think Crab-chan wanted another one?
[Was there anything that disappointed you?
Nothing in particular!
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
There may be some Parts that are not written but are necessary, such as the Fuse mentioned above.
Maybe it's unnecessary, but...
View detail
Excellent power management
I purchased DAYTONA's power supply unit D-UNIT WR. I installed it around the front cowl and prepared for the addition of electrical equipment. View detail
Easy to use
I'm Beginner of customization. But, Easy to install in motorcycles. When you add USB Supply, use this. I recommended this electorical parts!! View detail
Easy key interlocking! If you want to connect not only USB power supply but also other electronic devices, this is it!
[How is it used?
Because I wanted to install USB Power Port and DriveRecorder in the future to New ModelHAYABUSA
I purchased this product
Currently.
DAYTONA DAYTONA:93040
Exclusive Power Supply 2.1A for Motorcycle
https://www.webike.net/sd/22060421/
Only, I'm wearing it.
Was the one you received as per Image?
Bullet Terminal processing is required to use the above power supply port.
So we can replace the 2A and 5A inside and tighten it with Nut to get the power supply.
How was your experience with it?
The installation itself is easy, but the wiring process is a little annoying.
Compared to the Hayabusa 2, the storage space under the Rear Sets is much smaller, and if you put away the ETC, liability insurance, and maintenance notebook, the space is almost gone.
If you try to force it in, it will be difficult to close the Rear Sets, so you will have to consult with your documents and ETC while slightly missing this product under the seat.
[Points to note]
As I filled out above, I have trouble with the Wiring process.
In terms of work time.
Cowl removal seeking:10 minutes
USB port routing:15 minutes
Connection with Battery:5 minutes
Wiring process:20 minutes
Cowl installation search:15 minutes
and I had the most trouble processing it.
How did it compare to other products?
There seems to be a similar product from KIJIMA, although I haven't compared them specifically.
In terms of product size, I wondered if we could have considered that as well.
Other items that would be helpful
[ITEMS TO BUY TOGETHER
The list which I purchased for installation this time
KIJIMA KIJIMA:304-7150
ACC Branch Harness
https://www.webike.net/sd/22895068/
DAYTONA DAYTONA:98830
Attachment Power Supply Unit D-UNIT (D-Unit)
https://www.webike.net/sd/24050519/
DAYTONA DAYTONA:95444
Mount Kit Multi Bar Holder
https://www.webike.net/sd/23315099/
DAYTONA DAYTONA:92750
Multi Bar Holder Stem Hole Clamp Short Low Type
https://www.webike.net/sd/21846547/
[Opinions and requests to Manufacturer
It was useful to have Fuse in for Replacement.
With the Chinese Fuse set that I bought from Amazon, the size was a little too small and the lid of the Case could not be closed.
If you do buy it separately, I would suggest buying the shorter Fuse.
View detail
It was easy to install.
[How is it used?
I used this one for the purpose of taking out USB power supply.
I chose it with the secret thought that it would be great if we could do electric heating together for the winter.
Was the one you received as per Image?
The item arrived exactly as per the Image. The box that the product came in arrived in beautiful condition.
Was the installation difficult?
I'm not an expert in all things Motorcycle, but there are many installation videos posted on youtube and it was relatively easy to install.
How was your experience with it?
Touring is possible without large trouble around electricity.
[Was there anything that disappointed you?
After all, because the box of the main in which Fuse is contained is Large threshold, it was Large strange to store it in Motorcycle including the handling of Wiring. I might have used the most time for the handling.
View detail
good
[How is it used?
I use it to charge my phone on Touring.
Was the one you received as per Image?
It was just as Image.
How was your experience with it?
There is a Waterproof Cover for the Connector when it is not in use and the Connector can be fixed with the attached Clamp.
So convenient.
Cable is covered with Protective Tube, so it seems to be durable.
View detail
Good workmanship and practical
I bought this for KAWASAKI Ninja1000sx, mainly for navigation, dash cam and winter heating suit. I saw a high evaluation of DAYTONA on the Internet, so I started. Open it and take a look at the structure inside. The workmanship is very fine and the quality is very good. Never worry about not having enough power anymore. ---------------------------------------------- This is to buy KAWASAKI Ninja1000sx use, mainly for navigation, tachograph and heating in winter clothes. In line to see very highly DAYTONA, start with. Open looked at the inside of the structure, workmanship is very fine, a look at the quality is very good. Never worry about power not enough. Powered by Google Translator View detail
place to put oneself
I bought this product to install the ETC. The recent motorcycle is troubled without the space under the seat even just. It is compact, but I installed it between the seat frame because the space is limited in the SV with the canister on the rear, and I want to confirm the durability from now on. I want to confirm the durability. View detail
Even the troublesome wiring process can be done with this one!
I used to make a number of them for different purposes, such as Relay, which picks up the ACC, and Wiring, which is a power supply, almost by myself.
This product can be connected to the ACC per Battery and Tail lamp and placed under the Seat.
It's very easy to use with a wide variety of power supplies.
The messy wiring became easy to understand and Refreshing and I'm very happy with it!
View detail
Performance is good enough, expect durability!
My current USB power supply is in a bad mood and won't charge properly, so I bought this new USB and installed it!
Bottom line, the charging performance, it's meh!
The one I used before was in too bad shape and only gave out about 50mA, but after replacing it, it was over 2000mA!
It's perfectly fine to run with Navigation and music on!
I'm happy with just this, but since I'm going to write a MeritDemerit for this product...
Merit
Compatible with USB powerdelivery for fast charging!
No need to buy a new USB cable as it is integrated with the USB cable!
You can get power from the Brake Switch!
Demerit
Because the Cable of the power supply is red and long, it stands out around Brake master.
If the USBConnector is damaged, all the parts including Harness will be replaced
This is the case
Touching the Merit part, you don't have to look for various cables to be compatible with the USB cable, and as long as it's powered off, the PD is compensated. (Is that an exaggeration?) It's actually quite large!
This is actually very easy to use compared to other USB power supplies, because there are many restrictions when trying to use the functions of the PD, and it often doesn't work in some combinations!
It comes with a Harness that can be interrupted by the Brake switch, so it seems to be easy to get the power out for those that fit!
If you touch the Demerit part, the Cable for Brake switch interrupts related to the Merit part is a bright red Cable, so it is very noticeable around the Brake master!
In the case of my motorcycle, where should I take the Minus side from because of the aluminum frame? After all, I decided to take it from the Relay power supply that is attached to the Plus minus and the minus near the Battery! (There's no extra wiring around the Handlebar, so the installation is better as a result.)
You also need to be concerned about the position of the transformer box, so I think it's necessary to match the actual car. (I've tied it to Clutch Wire.)
The performance is unquestionable as long as the Connector doesn't break, so even if it does break, it might REPEAT…!
View detail
Is it useful?
The number of convenient electrical components has increased recently. If you want to install the smart phone charger, ETC, grip heater, and other parts that are essential for touring, this unit will make your life a lot easier. I installed this unit under the Seat and on the tail lamp side. The construction is solid and convenient. I am satisfied with the Wiring.
I'm looking forward to the improvements.
View detail
Relay circuitry is the way to go
It is convenient (^_^) v
I used it to install the Grip heater
Used for Grip heater+Navigation+Fog+USB power supply
The wiring is Refreshingly good and Large is a very useful product (^3^) /
View detail
Refreshing didn't go away, but I'm generally happy with it
Drorecords, Navigation, Grip heater and electrical components are increasing and Wiring is It was a mess and I was wondering if I could do something about it, so I bought it
Installation was really easy as I used the KIJIMA Harness for power extraction Just connect the battery to the Plus, Minus and Harness
The body is Compact, but it is still so compact that my beloved machine can fit in it as a Refreshing There was no space for the included Double-sided Tape
I used to take power from Fuse, so I had to use Hexagonal I had to use Wrench to remove the Cowl, but now I can just remove the Seat Access is now available
View detail
Convenient for mounting electrical components
The installation of electrical components requires a lot of work, such as taking wirings from the Attachment power supply every time I bought this one because it takes a lot of time
We are going to install the Drive Recorder and the Grip heater and other electrical components If you have a schedule, it might be a good idea
I installed it under the Seat
On my motorcycle, it may be because of interference with the Seat, or it may be that the Seat is a little difficult to install I did
Another round of Compact would have been even better
But I'm happy with it
View detail
Fits: HONDA Rebel 250, HONDA Rebel300, HONDA Rebel300
It was as easy as the name suggests!
As the name implies, it is easy to get the key-linked power supply out Because it branches from Light, there is no difficulty in handling Wiring However, putting in the Case of Light was cramped So it might be useful to have radio pliers View detail