Reviews
This is the third DUnit.
I bought this for the installation of a laser detector and to organize my Wiring (ETC, DRA recorder). I wanted to use DUnitPlus because it has a charging line, but there was no space to install a large, sturdy charging line in the rain, so I decided to use the Waterproof Type.
The new Horizontal Type is more secure because each Wiring has its own fuse.
View detail
Cleanliness
I bought it to organize Wiring, I had to at some point ... .
However, when I used the old Fog Lamp branch from the Grip Heater for the ACC, the relay part was chattering when the heater was in steps 2 to 4. It seems that 2 to 4 steps is Pulse. I am not good with electricity. Finally, ACC was taken from the Tail lamp because the Rear brake was already used.
View detail
Thank goodness for Size
Used for installation of DriveRecorderー.
Since the space for the driver's camera body is just barely enough, I chose this Small Type. This small size was very helpful.
It can be installed under a seat or in other places with little space, and since it is waterproof, there is no problem even if it is attached to the exterior.
If you are having trouble with Space at NAKED or elsewhere, this is the place to go.
View detail
Couplet-on makes it easy
Used for DAX125.
Although the product is for CT125, we contacted DAYTONA and received a response that this part number was compatible and we could easily extract the power supply with the Attachment Power Supply Couplet-on.
This is not a problem with the product, but there was not enough room in the space behind the headlight where the power supply was taken out, and it was a little difficult to fit the wiring, including the coupler.
View detail
Convenient
Unlike the past, there are many convenient parts these days, and they are very convenient. View detail
Useful product but a little disappointed in the detail workmanship
[How is it used?
It was installed on XJR400R.
Last summer, the Regulator had a puncture, and we thought it would be a good idea to review the electrical system, so we decided to go ahead with the project.
We introduced this system in order to centrally manage the originally installed ETC and the Oil Temperature Meter to be installed in the future.
Was the one you received as per Image?
The size is quite a bit larger than I imagined.
I was thinking of placing it in the space under the Seat where Relay and Igniter are attached, but it was difficult in terms of size, so I installed it in the storage space for in-vehicle tools.
To be honest, I did not need the constant power supply function, so I slightly regretted that I should have used a compact size Waterproof Type or one made by KIJIMA.
Was the installation difficult?
If you can handle electrical systems to some extent, you should have no problem, but if you don't know anything at all, you should honestly leave it to PRO.
I think it's good
I think it is difficult to say how easy/difficult it is because the installation space issue and the length and routing of the wiring varies depending on the car model.
We have uploaded a video on youtube regarding the installation, so we hope you will find it helpful.
How was your experience with it?
It's working fine
So far, only ETC and Oil Temperature Meter are available, but they are functioning well and if something should happen, Fuse will be flying so we can be safe and secure.
[Included Parts:were they on?
Instruction Manual, Double-sided Tape, and In-Hemp palm sticker were included.
[Was there anything that disappointed you?
? Difficulty in using the power supply Wiring
The Shrinkable Tube is used for Plus, Minus, and Attachment, but the opening is too narrow to reach the Battery terminal, and the Attachment Wiring cannot reach it either. The opening is too narrow to reach the battery terminal, and the Attachment Wiring cannot reach it either.
So the Shrinkable Tube was eliminated by cutting a considerable length of it with Cutter.
Stag beetle terminal
→BatteryWhat about the Wiring that takes power is the Stag beetle terminal?
Personally, I was quite worried about the Stag beetle terminal because I have the impression that if the Bolt is loose or something, it will come off immediately.
If the stag beetle terminal is removed, the D-UNIT itself will not function, and the associated electrical components will also be unusable, so I feel it is quite risky. I personally modified it to Round Type Terminal.
? Bolt for constant power supply
I don't use it, so it didn't matter, but the Bolt for constant power supply had to be a Thin Open Wrench to be able to handle it.
I feel it is quite difficult to work with for those who use it.
View detail
Simple Power Supply Cable
I was looking for a simple connecter with a simple spec. for charging my iPhone and decided on Ditona's product. View detail
Wiring is long and easy to use
This product is easy to use with long wiring. The waterproof cover on the terminals is also firm. The transformer part is a bit large, so I had a hard time hiding it. View detail
I'm looking forward to the future.
I wanted to install a DriveRecorder, ETC, etc., so I first purchased the D-UNIT. The installation was easy as long as the battery and fuse box are located close to each other and there is a place where it will not get wet from rain or mud. I am looking forward to the future. View detail
It has been shipped as shown in the picture and the quality looks good.
Thanks to this item, I think it will be possible to clean up the messy wiring. The wire is about to break because of the heated grip, but I think I can save it well. View detail
Cosmetically good.
It is safer and more reliable than creating individual Wiring and Relayetc.
It is a good product with good cosmetics.
View detail
I used it to turn on my phone Charger.
[How is it used?
I put it on as a Relay to take directly from Battery to stabilize the phone's charge.
I still have room in the wire and would like to use it for ETC and electric heating Gloves.
Was the one you received as per Image?
Yes
Was the installation difficult?
When connecting the Body wire to the Battery, the terminals are screwed down.
It was difficult to get the Screw to close in the right place.
About the REBEL, removing the Cover to get the Battery terminal out was Large strange if you are not used to it!
How was your experience with it?
I'm glad I came well-charged.
[Included Parts:were they on?
Yes
[Was there anything that disappointed you?
None
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
Thick double-sided tape is easy to apply even if the fixed place is not flat.
View detail
Organizing Wiring
I purchased this to keep Wiring organized with the USB and Fog Lamp additions.
What did I do later? It is also recommended to avoid the question "What did I do later?
View detail
Just connect it to Battery and ACC power!
Just connect it to BATTERY and ACC power! I wanted a power source in addition to charging my phone, so I bought this one. I was not sure about other D-UNITs, but I chose this one because of its compact body and waterproof. I could use the Brake switch connection Wiring of the USB power supply of the same manufacturer, so the connection itself was very easy. View detail
For SUPER SHERPA.
I bought this one because the battery terminal such as Fog light, USB power supply, and battery indicator were getting crowded. The fog light is now turned on when the key is turned on, which is a big relief. View detail
Very convenient
ETC power supply, USB power supply, etc... all the power supply lines of modern motorcycle necessities can be consolidated in one place, so it's neat and tidy. View detail
Very useful
Unlike NAKEDetc., CowlMotorcycle often does not have a space under the seat, so this kind of product is very helpful. It is convenient, but since the unit itself does not open, I wonder what you do when you want to change the fuse. View detail
D-UNIT installation
Installed on ninja250 2018
Easy to manage ACC power supply Purchase at the same time for Grip heater installation
The ACCPower Supply Cable of the body is extended by modifying the Bullet Terminal and cutting the Tail lamp's Wiring and connecting it. The Tail lamp's Wiring is used because the lid does not close when it is removed from the Fuse Box, causing water to enter.
Included Parts:includes parts for the Wiring branch, but these parts are not used because they cause contact failure as they deteriorate over time.
After wiring, WaterproofTube is used to shrink by a lighter flame to make it waterproof.
Fixed with Tie Wrap of Included Parts:in Frame under Seat as there is no installation Space.
It's easy and convenient, considering the time and effort required to prepare and make Relay, etc. by yourself.
View detail
Beware of Bullet Terminal
Bullet Terminal is DAYTONASize!
General Bullet Terminal cannot be connected
I reattached all Bullet Terminals on the D-UNIT side.
Other than that, I am satisfied.
View detail
Fits: HONDA cross-cub 110, HONDA GROM, HONDA CT125
Used in JC75 Grom
Easy power extraction by simply plugging into the Coupler under the Seat
I originally plugged the Cable directly into the Coupler terminal, but I knew I would have to remove it during maintenance.
JC75 would fit better if the Cable part were shorter, but it's a Universal Product.
I am satisfied with Large as a product.
View detail