Reviews
Concerns about rainy weather
I was concerned at the time of purchase that rainwater might not get into the USBConnector, but as I thought, the cover was too loose and it was right on target. Worst! View detail
Fits: Others
Easy to install, very effective!
The installation was easy even for me, who has almost no electrical knowledge.
If anything, it was a trial and error process on how to put Wiring together and how to make it look beautiful.
As for performance, I have only used one port, but it was sufficient for my needs, as I was able to fully charge Tan while doing Navigation.
There is no simultaneous use of two ports yet.
View detail
Fits: Others
Recommendation for Off cars
I was looking for a good one for my off-road car, but when I installed the hand guard, there was no space for the USB port. 14mm space was enough, so I felt like this was the only way to go. View detail
Fits: Others
DAYTONAUSB Slender
Very easy to install, only 1 pc of Phillips Screwdriver is needed to complete the installation.
From now on, you can enjoy autumn touring alone.
View detail
Fits: Others
JUST the right size to fit in a small space
I installed it on a Gixxer SF250, and it fits in the handlebar gap effectively, and there is no discomfort around the handlebar even after installation.
Easy to install.
View detail
Fits: Others
inconspicuous
Some car models may have some difficulty with Unit and Wiring, but they are easy to attach. View detail
USB port
The USB port made by DAYTONA is a standard product and can be used with confidence. View detail
Good combination of charging and voltmeter, but failed after 10 months.
When I bought the car, I installed a portable charger for my motorcycle, but since the battery capacity is small, I thought it would be nice to have a voltmeter as well to check the battery capacity.
With the Handlebar Clamp, the Monitor can be mounted closer to the Right, Center, or Left. The wiring is also drawn through the back straight line, and I took the attachment wire from the rear brake switch. The installation went without any difficulty.
Touring's smartphone Navigation is indispensable and the charging performance was perfect.
Monitor is easy to see in the daytime, but at night and in Tunnel, it may be a bit glaring.
When the Battery charge runs out, the screen will turn off in the 10v range.
After 10 months of use, the screen went out and the Blinker, Neutral lamp, and Tail lamp did not light up while driving. I can't rule out the possibility that the cause could be the vehicle, but since there was a one year warranty, I am reporting this.
View detail
Fits: Others
Purchased to power my cell phone.
Purchased and installed to charge my cell phone.
Left Handlebar Mounted on the side of the Switch.
I don't feel any discomfort compared to before. In my opinion, it is the best match without losing the appearance. I connected it to the same Daytona DUNIT, so there was no need to modify the Bullet Terminal, but since I connected it to the Seat, the Extension Cord alone was not enough to reach it, so I had to extend it further.
View detail
Exactly to secure your phone power supply.
This product is waterproof and is EXACTLY what I was looking for to secure the power source for my phone. Installation was relatively easy. View detail
It's a necessity.
This is a necessity.
I was torn between USB-C or A. I'm still good with A.
I don't even need the 2.4A for fast charging because I'm connected all the time.
View detail
Fits: Others
Easy to install
Installation is very easy, just interrupt the Brake switch.
One thing that bothers me is the color of the Wiring …I wish it was Black instead of Red.
View detail
Fits: Others
The SMART construction allowed me to easily attach it to the narrow Separate handle without difficulty.
Brake switch branch wiring is also included and was easy to install even for beginners. View detail
For voltage management
The USB port has a voltmeter, but the display is a little difficult to see. When charging a cell phone, the current value is displayed, but it cannot be displayed at the same time as the voltage. View detail
Fits: Others
Mobile Holder and Quantity:Set!
[How is it used?
It is installed on my commuting Motorcycle.
Was the one you received as per Image?
It was just as in the Image, there were a lot of Wiring systems in it, but I didn't get lost because it was written in the Instruction Manual.
How was your experience with it?
The installation was most Large strange to remove the exterior because it was a Scooter. However, once the brake switch is delivered, it can be installed according to the Instruction Manual. However, the installation was not easy.
[Points to note]
If you are new to wiring, be careful; the Instruction Manual should give you some idea. If you are careful about the "+" and "-", you should be fine.
How did it compare to other products?
I recommend it because it can be pontooned and the Instruction Manual is easy to understand.
The appearance was Refreshing and the shape did not destroy the car body Image.
View detail
Fits: Others
Slim and location-independent design.
[How is it used?
While I was searching for something good to secure the power source for my smartphone and Camera etc., which are now necessities, I came across this product, which is slim and can fit in the gap between the Handlebar and the Refreshing and purchased it.
Was the one you received as per Image?
It is a Type that attaches to a Handlebar and is a Simple & RefreshingDesign that is compatible with both 22.2mmSize Handlebars and 25.4mmSize Handlebars, and is just like Image.
Was the installation difficult?
It is not too difficult because the Instruction Manual describes how to take out the power supply in several Patterns.
If you are not good with electrical systems, it is better to request a trusted friend or Shop.
How was your experience with it?
It is also able to charge my phone, and it functions properly when I charge the battery of my ActionCamera or use the electric pump (for Tire's Inflator) on the go, so the Large change is very useful.
[Included Parts:were they on?
It includes USB power supplyBodyBody, two RubberSpacer, Extension Harness, Branch Harness, Connector for wiring, and two Tie Bands, so it can be installed with only this product if you have a Large Mortgage Motorcycle. This product alone should be sufficient for installation on most large motorcycles.
[Was there anything that disappointed you?
None so far, how durable is the Rubber cap? I am curious.
0Other items that may be useful include
Point and hang of installation
Since it is a universal product, the waterproof cover (rubber lid) may not be able to be installed in the desired position depending on the treatment of excess wiring or the conditions around the handlebar depending on the type of car.
Let's devise and modify it well and install it in an easy-to-use position.
[Availability and clarity of the Instruction Manual
A simple but thorough Instruction Manual is included in the package. If you cannot understand it, do not hesitate to ask a friend who is good at electrics or a shop.
[Notes]
As mentioned above, do not force yourself to work on something you do not understand, or you may cause an unexpected trouble with the electrical system.
[ITEMS TO BUY TOGETHER
Not particularly
[Opinions and requests to Manufacturer
I am concerned about the durability of the rubber cap for waterproof. I think it would be even better if you could devise another way or sell the rubber cap as repair parts.
View detail
Fits: Others
Essential Items that should be attached to one car
[How is it used?
I installed it on an IndonesiaYAMAHA WR155R.
Power is taken from the Brake switch and Wiringetc. is stored under the Headlight.
SmartphoneFolder is combined with SP CONECTO.
Was the one you received as per Image?
I have purchased this product many times and it is a stable product.
How was your experience with it?
The most Large feature of this product is that it can be powered from the Brake switch, which is not necessary for those who can process and take Wiring by themselves, but it is easy when it is troublesome.
Once the installation position is determined, tie wrap is used to secure the unit and complete the installation.
And since the Series has 2.4A, the good thing is that it can supply enough power so that the battery does not run down even if you use Navigation while charging.
With 1A products, the supply can't keep up.
Basically, one mouth would be sufficient, but I think there are also two mouths, so if you use it often, that would be fine as well.
[Points to note]
The Wiring that comes with it may be long. (I think it is an alternative long).
In my case, I bundled them up this time, but it would be better if they were cut to fit beautifully.
Another thing that is not beautiful is that the fuse part is huge.
The space is unexpectedly taken up, so even if the body is a Small Type, the result is voluminous.
Be careful not to leave the lid open or it will flood.
I hope this lid part can be improved as well. What can I say, it feels cheap. Whatever you do, be careful not to break the lid.
How did it compare to other products?
For what it's worth, I always end up buying these.
I would try others, but am I the only one who comes to this product for its stable Brand, price, and quality?
View detail
Fits: Others
I love the Slim look.
Mast items to run while charging cell phone.
I think most Motorcycle riders have it installed.
View detail
It's good enough.
Cost performance is high since it is 2 units for this price. I used D-UNIT without taking out from Brake switch. View detail
Power management & for smartphones
SUPER SHERPA was installed because the battery is worn out by starting the Cell. The USBCHARGE and the voltmeter are a little expensive, but they are quantitative.:If you think of it as a Set, it's cheap.
It is unobtrusively convenient to shift the Position.
Simple is sufficient for the functionality.
Wiring is simply connecting to Battery plusMinus and Attachment.
View detail