Reviews
Fits: Others
Easy installation
By simply inserting the Brake switch into the Brake switch, there is no need to search for a Cable that is energized when the key is turned on, and it is easy to install.
If you do not connect multiple power supplies for Grip heater and Navigationetc., a single outlet is sufficient.
View detail
With the conversion to D-Unit
USB and Cigar-Socket (for Inflator) were installed. Also purchased a D-Unit to keep Wiring organized!
The fixed Incilock design makes it universal and easy to use.
If you are concerned about it turning slightly, you can install it by sticking it on both sides.
View detail
Power supply USB 2 port for DAYTONA4.8AMotorcycle
The RelayBOX was cracked and the contents were completely exposed when I opened it to install the product. I thought that the returned parts were actually shipped. View detail
It is hard to see the energized indicator when outdoors.
I bought a new Cable because I changed the power supply to a USB-C one when I changed my phone model.
The connector on the LIGHTNING side is L-shaped, so I chose this one. The connector part is tough, and it looks sturdy to say the least, but you need to be careful about interference with the tank.
The connector on the LIGHTNING side has a white LED Lamp that glows when energized, but outdoors, it is almost impossible to tell whether the LED is lit or not.
I think it would have been better to remove the LEDs and make the Connector smaller.
View detail
It's surprisingly unobtrusive when attached to the body of the car.
I changed my phone model, and now that it supports PowerDelivery, I wondered if the USB power supply I currently have on my phone might not be able to charge enough for the amount of battery it consumes. We therefore replaced Motorcycle's USB power supply with one that also supports PowerDelivery.
I had been using DAYTONA's USB power supply in the past, and there was no particular trouble, so I used DAYTONA's.
There was also another one that was compatible with PowerDelivery, which seemed to be more discreet and could be refringed, but it had a separate rubber cap for the terminal, so I chose this one with the cap integrated into the body because I was afraid I might lose it in some accident.
The Z900 has an Attachment Power Supply Connector near the Meter for attaching an OEMOption DCPower Supply Socket, so it can be connected without interrupting the Brake switch.
Installation is easy as long as the Screen and ETCAntennas are removed from the Bracket and moved out of the way, leaving the Wiring in place.
The USB power supply transformer is also rather small and can be easily hidden in the space behind the headlight.
I attached the body to the side of the Mirror Holder on the Left side, but I thought it might float a little when I looked at it with the Single Body. I thought it might float a little when I saw it on the Single Body, but when I installed it, it was not as noticeable as I thought it would be.
View detail
For Grip heater
I always use this because it is easy to install, although it is battery-direct.
I use it for Grip heater for wrapping.
View detail
There is not much difference in price between a bite and two bites.
The price difference between one and two mouthfuls is not much, so two mouthfuls are purchased and fitted.
Since we had previous experience installing this product, we were able to install it without difficulty, even though there were differences in considering the wiring path and mouth mounting points for that model of car.
If possible, I would like to see a Bullet Terminal included as well as a direct Battery terminal.
View detail
WaterproofRubber, lid, and other details are well made for a reasonable price!
As you can see from the pictures, the WaterproofRubber part and the lid are of high quality!
But at a very reasonable price! Hardly visible once installed on the car body, with great looking details.
Tie Wrap and Double-sided Tape are also included.
I was very impressed with the way they made their products from a user's point of view.
View detail
Fits: Others
USB power supply installedImpression
Since the Slim Body and the Transformer Unit are separate, I think the reliability of each part is high.
In my case, the Transformer Unit was wired together in the Head lineCase, so I am satisfied with the Large change in appearance and as a Refreshing.
There is a generous Ampere value even when charging a smartphone and SENNA at the same time, and there is a very high degree of practicality.
It is considered a recommended USB Power Socket.
View detail
Compact
Compact, so the Handlebar area is clean. View detail
GoPro can now be charged.
I was using their 2.1A 2-port USB power supply and was unable to charge both GoPro7 and 10. I was able to charge my phone. This time I used a 4.8A (2.4A) The GoPro is now able to charge without any problems, which is quite convenient.
Installation is easy because the Plus side of the power supply is taken from the front brake switch by branching it out with a short cable.
However, if possible, it would have been better if the connector was the same as the connector that is taken from the battery of the 2.1A product. The cable of this product is thin and a little insecure, and its red color is conspicuous, so it requires some ingenuity to hide it around the handlebar. We also insulated the flat terminals & Bullet Type Terminal (water proofing).
In addition, the cable length from the transformer to the connector is shorter than the 2.1A product, and the USBConnector is larger, so it could not be easily attached to the original position.
In my case it was a replacement, but I think it would be easier for new installers.
View detail
Replaced one mouth with two mouths
Right now, I have two ports linked to the key, and one port with a constant power supply.
I purchased this product to change the car navigation system and Bluetooth transmitter power supply to a constant power supply.
I have been using two of them for 4 or 5 years now and have had no breakdowns, etc.
Wiring and installation is easy as long as the Tank is removed, which is recommended.
After the exchange, there will be 4 ports, but Ron Two is a Tank Bag guy, so he can also charge his phone (he has 2) inside.
The battery was also replaced recently because it seems to be a burden on the battery.
For touring in the rain, DAYTONA products have a cover for the plug side, which does not adhere closely.
It provides a reasonable amount of protection from the rain.
(I've had no problems with heavy rain so far, thanks to Cowl maybe...)
View detail
Exclusive Design makes it easy to use.
Quantity to Smartphone Holder:It is good because it is difficult for the Cable to interfere with other places, such as when the charging Cable is connected in the set state. View detail
USB power supply
I installed it in an inconspicuous place on the meter panel and am very satisfied with the large size. View detail
Needed for going out a lot. Safe to use with a secure lid.
I bought it because I need a map when I go to the woods and touring.
The product was designed to be a battery charger, but we decided to use the Attachment power supply since there would be few situations like this. (Modification at your own risk~)
I bought it without much comparison with other products, but there was a box like IC Box in the middle of Wiring, so I was worried about where to put it.
If you go Off-road, you can rest assured that the lid is secure!
We drove through dust and rain, but no Large Trouble!
View detail
You must choose which Connector to use
The product is fine.
However, there are quite a few restrictions on the Connector to be connected with a deep USB port.
View detail
Separate handle savior
Separate handle has no mounting space anyway, so I appreciate this kind of product.
I managed to get into Limit on the YZF-R3!
View detail
Fits: Others
Easy to run while charging
I thought about attaching it to the Handlebar, but decided on this location because it is as close as possible to the phone and GoPro, and also because the Cable does not move when the Handlebar is turned off. (See photo).
Looking into the wire exit from the body, the waterproof property is Zero. The inside Print board and soldering are visible and the construction is crude. I sealed it with Holtz sealer.
The installation itself is easy with a single screw, but it was very troublesome to remove the cowl when I wanted to install it in a position like mine.
However, it is now very easy to shoot Video and drive by Navigation while charging.
Two ports allow simultaneous use with both smartphones and GoPros.
View detail
Easy installation
The installation was easy, even for an amateur, since it was connected directly to the backplane.:I am a little concerned about the durability since it is a Plastic product. View detail
Concerns about rainy weather
I was concerned at the time of purchase that rainwater might not get into the USBConnector, but as I thought, the cover was too loose and it was right on target. Worst! View detail