Reviews
Reasonable。
I replaced the Large size scratched by a stepping stone. View detail
Fits: Others , YAMAHA SR400, YAMAHA SR500
This is what you get if you shorten it.
OEM modified and installed on short fender
The holes in the Type 2 Fender do not match, so modification was necessary.
View detail
Match to CustomAmerican!
I purchased this Tail lamp for my Shovel head 77 year car inspection.
The original Lamp had a red valve and was too small in area, so we chose this one in order to pass vehicle inspections without destroying the original image.
The cost performance is good, but the construction seems a little light.
I think it is a good shape for American cars such as HARLEY who want to make the tail as small as possible, but still pass vehicle inspections. I think it is good to have it as a stock because it is inexpensive.
View detail
Fits: YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400
well-known
The familiar Lucas type we often see in SR.
If you look at the details, there is a BALI.
The installed side is so-so clean.
I didn't like the fact that Reflector was a perfect square.
I changed to a thinner rectangular one for an additional purchase.
However, when replacing the ball, I felt that the inside of the ball was not well made.
Frankly, I am not sure how many times I can take the Cover on and off.
View detail
Before installation
I decided to purchase the product after seeing examples of installation on social networking sites.
As for SR, I was thinking of owning/using it in NORMAL, but I still want to customize it.
We are considering installing SWCondor Handle, so I think Small blinker is a must.
In terms of products, we have a lot of experience in installation, so I don't think there will be any problem at all.
View detail
Halogen upward compatible
It's like Halogen is converted to LED, so it's very easy to replace the Halogen with LED, but it's not AssistHigh beam or DualHigh beam like the high-end models of other companies, so it gets dark in the front when it's High beam. If you are looking for brightness, I think other products would be better, but I think it's a good cosmetic choice for dress-up in Maine in the city. View detail
Equipment on Z900RS se
Needed for Blinker replacement. Good, not too bad, not too bad View detail
No lights
I bought this for Repair because the LED I had been using for 4 years stopped lighting up.
It would be nice to get a separate partial part.
View detail
Plate
Exactly. neither acceptable nor unacceptable. Brand for peace of mind. View detail
neither good nor bad
Normal product
Overpriced Kanji compared to price
View detail
Since it did not independently need to prepare, the silhouette after attachment was also finished in the beauty and it was good to have made stay on one's own, if adjustable since it is YUNOBASARU etc. the configuration top merely of an adjustable, an
Since it did not independently need to prepare, the silhouette after attachment was also finished in the beauty and it was good to have made stay on one's own, if adjustable since it is YUNOBASARU etc.
the configuration top merely of an adjustable, and the circumference of stay -- some -- to the core one -- the bottom becomes touch.
honest about the direction which pursues smartness, and a direction to show shapely -- or [ being slightly unsuitable ] (?)
View detail
I bought it just to try things out.
I decided to install this product on my ZOOMER while I was servicing it, not that I felt the need for the Hazard function, but I took the challenge to improve my maintenance skills. As it turned out, I couldn't install it on the ZOOMER, even with the included Blinker relay or the optional Coupler, because the shape doesn't match the Wiring on the ZOOMER's body. I gave up halfway, but then I called DAYTONA and asked them to help me. The shape may be different, but the point is to get electricity to flow." So, we cut the wiring on the body side and connected it to the winker Relay of this product (see image). I was very excited, but I was very impressed when the Hazard function worked properly. I tried it only for fun, but I think it would be a good purchase for those who want the Hazard function. However, you should check by yourself whether you can pimp it or not. View detail
To Restore Old Overseas Cars
It is used for the repair of the old motorcycle in Italy. I decided to use the DAYTONA product which is available at any time because it is large strange to get the same one as the OEM product at that time and the reliability does not seem to be so high. When I bought Relay with Hazard Function in the past, I was able to use it without any problem, so I assume that there is no problem this time as well.
You need to pay attention to the number of poles and so on, but well, Blinker relay is easy to manage if you use the normal one that is commercially available.
View detail
Fits: Others
more than I thought
It seems to be Wiring thin as well as Front. There is a lot of light quantity. View detail
neither too much nor too little
It's just a hole Cover.
Cut-out of Aluminum with good texture.
In all honesty, the Blinker Hole Cover is just a plastic cover, and I wish it was cheaper, but it is a dedicated product and the fit is outstanding.
It fits tightly into the OEM hole.
There is room to move about 5mm back and forth.
The positioning holes for fixing the OEMBlinker are awkward, so the texture is Minus 2 stars for that.
View detail
Fits: YAMAHA SR400 19, YAMAHA SR400 19, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400
Vibration countermeasures
There is a gap between the included Reflector Bracket and the OEMNumber, so they bump into each other while driving, causing abnormal noise.
If you don't put rubber or Sponge etc. in the gap, it will cause cracks. We are SR400FI.
View detail
Fits: YAMAHA , KAWASAKI , YAMAHA MT-07
Blind.
It is purchased as a blind plug along with the relocation of MT-09SP to the Front Blinker.
I used ZETA's nifty Taper bolts to make the holes less noticeable.
I know it's a bit expensive, but...
View detail
Fits: SUZUKI Street Magic 110, SUZUKI street magic, YAMAHA Jog Aprio Natural, YAMAHA Jog Aprio Natural, YAMAHA Jog Aprio Natural, YAMAHA Jog Aprio Natural, YAMAHA Jog Aprio Natural, HONDA XL250, SUZUKI Address V100, YAMAHA Super Jog ZR, YAMAHA TW200E, YAMAHA YB-1, YAMAHA TT250R, YAMAHA TW200, YAMAHA JOG, HONDA JOKER90, HONDA XLR125R, HONDA XLR250, HONDA JOKER Helmet, HONDA XL250
Bright enough.
The power consumption remains the same, but it is brighter and safer than the NORMAL with the High Wattage BedLight valve.
No need to replace the Harness and Relay, just replace the Valve, so it's easy to customize.
View detail
Compact design.
It is very similar to H4 Valve of NORMAL, so I can install it without any modification. View detail
Fits: YAMAHA , KAWASAKI , YAMAHA MT-07
Items for installing the Blinker
In my case, Large size is too small for this type Because I have the Fender Eliminator Kit of Shinkai, I have to use the OEM Fender Eliminator Kit In the Kawasaki Size, it was small, but I was able to fix Blinker These are items to be attached between the two pieces of the bracket View detail