Reviews
Fixed
I thought I could use it to relocate my Brake tank. But I have not used it yet.
Quantity so far:Set was not necessary, though.
I couldn't find anything better, and this Quantity:Can I use Set? And.
View detail
Meter Installation
I was looking for a Meter Mounting Bracket and this is the one I got.
The shape is also nice and easy to install.
View detail
Fits perfectly with DAYTONA's AquaPRO louvers.
As you can see, the Size is perfect with the same Manufacturer.
I used it in the middle with the Handlebar co-tightening collar in between.
It was at an angle, so I tapped it and corrected it flat.
View detail
I put it on my DT250M.
It was exchanged for the defective totalizer and Trip meter of OEMMeter of DT250M. By the way, Speedometer is working.
I changed the meter of DT250M three times, but all the same part was broken, I thought about repairing, but it was quite expensive, so I was looking for a new mechanical meter and found it. It seems that DAYTONA also sold the meter of the large type a little more before, but now there was no choice but this 60mmType of the small size, and I bought it.
I disassembled the OEMMeter and put this meter inside. After all, the old car is not suitable for a small meter.
The Meter worked fine. It would be useful for people who drive unpopular old cars if they could make a Large fine-scale like before. I took a picture of it, so I modified it like this. When I see it from the top, something is strange. I am convinced that it is good at this.
View detail
Best for those who want to keep the OEM look.
The black body is the best match for OEM meter. The back light can be selected from White, Blue and Orange according to your mood. The unexpected favorite Point is the place where the opening of OEMMeter and Timing are completely matched. This makes me grin.
However, the wiring to the Ignition coil is difficult because it is done through a narrow gap in the cover.
I think the function of the voltmeter is convenient. If it is difficult to say, the clock function was wanted because the maximum number of revolutions Memory is not particularly necessary.
View detail
Good-looking
In terms of appearance, I personally think it is very satisfying, and the size is moderate. Finally, I hope it can be easily installed on my beloved motorcycle. View detail
It broke easily.
Because AceWell was malfunctioning, I bought it thinking that it would be large and strong if it was a DAYTONA. However, MODE switching was impossible at around 500km, and Speedometer also malfunctioned immediately after that. However, it was impossible to switch MODE in about 500km. View detail
Better Speedometer Position
The standard speedometer position on the XSR700 requires you to dip your head down to read it which is dangerous because your eyes will not be on the road. This product moves the speedometer in front of the ignition and above the headlight. You can now read the speedometer by moving your eyes only. It would be better if the speedometer was a slight bit higher, but if you move it any higher, it would not look as good cosmetically. The hardware is sturdy and installation was easy, only taking about 15 minutes. View detail
Installed in TS200R
I installed it for the purpose of correcting the meter when I changed the wheel diameter to 17in. because of battery reply, the clock is reset every time, but I was lucky because the odometer is not reset. View detail
failure
The problem that only Neutral lamp does not light up.
The one I had replaced due to initial failure has the same symptoms.
The Manufacturer was aware of this problem, but remained silent.
I would not recommend purchasing this product.
It only takes time to return the product.
View detail
สินค้าดีมีคุณภาพ ของแท้แน่นอน ถูกใจมากๆชอบในแบรนด์สินค้ายี่ห้อนี้ ถ้ามีโอกาสจะอุดหนุนต่อไปเรื่อยๆคับ View detail
I wish it was a little cheaper …
I bought it to take oil temperature from the cylinder head.
I can still understand if it's Repair Parts, but it's expensive when you think you have to buy another one of Meter's.
I wish it had come with Meter like the other Manufacturers.
View detail
great bracket!!
it fits very easily, even with my dart flyscreen. very simple with just one main part! also included are two bolts, and some rubber sleeves for the bolts so the bracket can grab on better and not damage the thread the position is much, much better than stock, no longer need to move my head to check my speed the pipe construction and matte black matches the OEM style very nicely!! this is how the bike should come from the factory View detail
Good!
Large Not too tight, easy to install and not too bad looking!
I installed it in the middle of the Handlebar!
I think it's good that you can put it anywhere you want
View detail
Relocation bracket
Quick delivery to Brisbane, Australia. Very easy to fit, instructions were in Japanese but it was intuitive enough to install. I like how the final product sits forward and slightly lower so that the speedo is just in your line of sight. View detail
Use with Tachometer from DAYTONA
I bought it at the same time as the Tachometer made by DAYTONA The TachometerSingle Body had a bad Response or a needle that went out of control I was worried because I had heard that the speed was not stable, so I installed this at the same time from the beginning It responds to the throttle without any discomfort, just like the OEM Tachometer Wiring is long, so it takes up a lot of storage space (It doesn't matter if you put it inside the Cowl.) View detail
It's neither good nor bad
Indicator stay was the only one I could find that was made by DAYTONA, so I bought this one
Visibility, I think, is adequate
More expensive than KIJIMA products
View detail
Performance as expected
Offset, Angle and other diverse lineups are great
The bracket itself is thick and sturdy
The anti-vibration part looks pretty good too
View detail
not bad
Purchased to replace the meter
Exactly for the DAYTONA Indicator Lamp
Satisfied with the shape and size
Too bad there was a BALI on the back side
View detail
It's the only way to go, so …
Performance is as expected
Plating is cheesy
Many people do not need the MechanicalMeter connection, so we developed a product without it I'd like you to do it
View detail