Reviews
My car ZX-6R is also like Motorcycle for International Model.
What was the deciding factor in your purchase?
Side reflectors are standard equipment on motorcycles overseas, and I believe that side reflectors increase the visibility of motorcycles and also help prevent accidents if drivers around you notice them by timing their vehicles quickly. I think it will lead to the prevention of accidents. I installed side reflectors on my ZX-6R as well, just like those for International Model motorcycles.
[How was the product?
EMark Income Reflector, OD is 40Φ, M6 Bolt Fixed Nut with Washer.:1pc., so Quantity:Pair (for Left and Right) Two must be purchased if they are to be matched.
When installing on the ZX-6R, the ReflectorSingle Body hits the Front Fender, so we used KITACO's aluminum spacer collar 5mm and a polycarbonate washer. However, the Bolt's bite is reduced by the amount of spacer, so we installed the Bolt firmly to prevent it from coming off. We are now thinking of measures to be taken in the future.
[Others]
Side reflectors will also be mandatory for New Model vehicles to be certified by the government after September 2023. This revision of the safety standard applies to New Model vehicles that will be certified by the Japanese government in September 2023 or later, and side reflectors are not required to be installed on motorcycles manufactured before that date. However, these parts will increase visibility, although not absolutely, and help prevent accidents by making drivers and pedestrians around you aware of your vehicle by timing it earlier. You may want to consider installing them, especially if you drive a lot at night.
View detail
Satisfied with the new look and feel
I was looking for a round mirror that could be attached to the bolt of the Right Side Opposite Thread Screw without an adapter, but I couldn't find anything like it, so I decided to purchase this product's Mirror Bracket and Fixing Bolt in quantity.:Pair (for Left and Right) Purchased at Rose.
Quantity:This is because there was no Round Type Opposite Thread ScrewSpec. available for sale as a Set (there is a Normal Thread Screw with security parts). (Normal Thread Screws with security parts are available)
I have not driven the car after installation, but I don't think I will be bothered by the slight shaking that occurs when the engine is revved up.
The Mirror part can be moved to some extent (30 degrees in all directions according to the manufacturer) even after it is fixed, making it convenient for fine adjustment.
Although a smaller Mirror would have been ideal, the Mirror's area meets safety standards.
It is a little harder to see directly behind the Mirror than the previous horizontal Mirror, but this may be adjustable by extending the Mirror section more to the tip of the Bracket. However, once fixed in place with the imonesi, that part of the Bracket can be " and marks, so it is better not to move around too much.
I used a spring washer to prevent loosening during installation.
At first, I used the ring on the base, but it was too loose, so I decided to use only the spring washer.
View detail
In ! which is not except this, a price... It is stylish anyhow.
In ! which is not except this, a price... It is stylish anyhow. View detail
[buying motive] The product ] which was seen as the candidate besides [point which got interested] [, [after-use comment], [comprehensive evaluation]
[buying motive] The product ] which was seen as the candidate besides [point which got interested] [, [after-use comment], [comprehensive evaluation] View detail
I didn't want to eat it.
I used to have a square Plate with an OEM Reflector on it.
One day I was looking at the Number for some reason and I thought it was too large and uncomfortable.
I remember this elongated Type
I didn't want to use this Type because so many writers use it.
I've been using it for a while now, and it's been going pretty well, and I didn't like it.
I'm sorry (Lol)
View detail
Refreshing
It is not noticeable and looks like Refreshing. View detail
If only it were a little cheaper
Front sideQuantity of mopeds to improve visibility when riding at night:Pair (for Left and Right) I installed it in
I was surprised that it was brighter than I expected when it was reflected in the Light.
It's such a small part, but it gives me more peace of mind.
But it's a little expensive; I'd appreciate it if it was under 500 yen.
View detail
On the body, not the Number.
With the Blinker change
More and more Brackets are tightening with Number.
It's thick and unappealing, so I'll use Reflector.
Moved from Number to Fender
Refreshingly better than I expected.
View detail
SlimDesign.
When I was wondering how to install the Reflector in my homebuilt Fender Eliminator, I found this product. The installation is fixed with Bolt&Nut, so it's different from sticking it on to the car. View detail
Very simple.
I'm glad that it is Japanese Vehicle Inspection Correspondence. View detail
It's neat and good!
There are various forms of Reflector
Recently, this Slim type is neat
Good appearance with a feeling that does not get in awkward Good !!
View detail
Color / Graphic is good and the price is cheap
I used it for MONKEY. Since there is not much gap between License Plate and Tire, I was looking for a thin Reflector and I bought it because there was a Reflector of exactly Size from DAYTONA. Well it was solid and it looked pretty View detail
Size is just right
Reflector was necessary with Fender Eliminator and purchased. Since it was my favorite Manufacturer, I decided to buy it immediately. Shape and quality are satisfied with Large change. View detail
Overall, Cospa was also good and Double-sided Tape was also good quality
The model used will be ZZr 1100 C 3
I purchased it with Fender Eliminator
Noticing that there is no Reflector, at Japanese Vehicle Inspection Correspondence
I bought it
To determine the best position to paste
Purchasing Black underlay in Hundred Young
License Plate Co-stop behind, paste
I did it
It was attached to a good feeling and safety was ensured
I feel it.
View detail
No complaints
It is the item as seen in the photograph.
Construction is solid..
I had something that the Reflector club was curved, but I needed Flat stuff and purchased.
It is the Minus element that Bolt that stops Reflector goes out Large behind, but there are no other complaints in particular.
View detail
For vehicle inspection
Because it processed Rear Fender, it buys it to fit the car inspection.
Not very good Is it not suitable for inspection? I do not want to, "everything" I'm attaching "here.
Because it is tightened with Number, it also becomes Number reinforcement.
View detail
The second one
I installed it along with Fender Eliminator, but I was dropped or lost in trial operation, because the tightening was bad.
The first one bought a bit like a triangle, but this time I made it a square.
To prevent falling, I fixed it using a double-sided tape and an instantaneous adhesive.
View detail
Size is good
The size of the License Plate and the good Balance. It is a nice way to install it. I am very good with it because it is thin in Ikeda. View detail
Simple - beauty
In MOTO GUZZIV 7, Reflector protrudes downwards
I tried installing it because it was a little unclear.
Installation was not easy with Bolt-on
This is not a product issue
Please do not worry about V7's number installation problem.
After installation, it seems Refreshing per Rear Fender seems to be refreshing.
The price is also affordable, it looks different and it's a Recommendation as an easy Custom.
View detail
It may be a standard in the classic no longer
I think that the shape of other companies is a book and it is limited to Slim of DAYTONA.
It is cheap to sell in certain ok but Reflector breaks immediately, I hear the iron part quickly ,,,,,,
View detail