Reviews
Fits: YAMAHA CYGNUS X SR, YAMAHA CYGNUS X SR, YAMAHA CYGNUS X SR, YAMAHA CYGNUS X SR, YAMAHA CYGNUS X FI, YAMAHA CYGNUS X FI, YAMAHA CYGNUS X FI, YAMAHA CYGNUS X FI, SUZUKI SKYWAVE250 burgman LIMITED, SUZUKI SKYWAVE250 burgman LIMITED, SUZUKI SKYWAVE250 burgman LIMITED, SUZUKI SKYWAVE250 burgman LIMITED, SUZUKI SKYWAVE250 burgman LIMITED, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman Type S
I was finally able to correct the angle to a safe one.
[How is it used?
When the Japan number was installed on the number mounting bracket of the KTM390DUKEOEM, the red reflector was facing downward, and the reflector did not reflect the light from behind at night, thus compromising safety.
Was the one you received as per Image?
I thought I have seen similar shaped Bracket in OEM Parts for domestic cars (lol).
Was the installation difficult?
The mounting holes on the vehicle body side and the holes on the Slant License Bracket side were not aligned slightly, so the holes on the Bracket side were cut off by about 2mm on the one side with a file to make an ellipse to align them. To prevent the Bracket from coming off due to vibration, I used a type of nut with a loosening stop.
How was your experience with it?
The 20-degree tilt angle is perfectly matched to make the reflector's reflective surface perpendicular and reflect light well at night.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
Not particularly
Other items that would be helpful
Installation point and hang:When diverting the product to a car other than the compatible model, it is recommended to measure the angle of the installation part with a protractor in advance to avoid mistakes.
View detail
Fits: HONDA Forza(MF10), SUZUKI ADDRESSV125, HONDA FORZA Z ABS, HONDA FORZA Z, HONDA FORZA Z, HONDA FORZA Z, HONDA PCX150, HONDA PCX125, HONDA PCX150, HONDA PCX125, HONDA PCX125, HONDA FORZA Z ABS, HONDA FORZA Z ABS, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125
Just the right angle
The angle is just right, without being obtrusive.
The cost is a bit high, so I gave it a 4 for cost performance.
View detail
Fits: HONDA Forza(MF10), SUZUKI ADDRESSV125, HONDA FORZA Z ABS, HONDA FORZA Z, HONDA FORZA Z, HONDA FORZA Z, HONDA PCX150, HONDA PCX125, HONDA PCX150, HONDA PCX125, HONDA PCX125, HONDA FORZA Z ABS, HONDA FORZA Z ABS, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125
It's a good feeling
I saw my friend's Motorcycle and… Number angle is different! I thought ….
Myself too! And … Choyage has been good... ♪
A little customization can change the impression of Motorcycle!
Recommendation
However, since the Number mounting is Bolt-do→Nut-do
If you are BoltCustom, please be careful.
(since they will no longer be using Bolt)
View detail
Fits: HONDA Forza(MF10), SUZUKI ADDRESSV125, HONDA FORZA Z ABS, HONDA FORZA Z, HONDA FORZA Z, HONDA FORZA Z, HONDA PCX150, HONDA PCX125, HONDA PCX150, HONDA PCX125, HONDA PCX125, HONDA FORZA Z ABS, HONDA FORZA Z ABS, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125
It's still good
I have repurchased this product because I have added a Motorcycle to my fleet.
The license plate attached to the rear fender was not a good parenthesis, so we installed it.
I have installed the same product on a motorcycle that I have owned for some time and have no durability issues.
Fender Eliminator is good, but the motorcycle I use to commute to work gets a lot of mud splatter when it rains (I've experienced it).
I think this would look great.
View detail
Fits: HONDA Forza(MF10), SUZUKI ADDRESSV125, HONDA FORZA Z ABS, HONDA FORZA Z, HONDA FORZA Z, HONDA FORZA Z, HONDA PCX150, HONDA PCX125, HONDA PCX150, HONDA PCX125, HONDA PCX125, HONDA FORZA Z ABS, HONDA FORZA Z ABS, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125
YZF-R1 (2016) for use in
It was easy to install and I am very pleased with how it turned out, just as I expected. View detail
Fits: HONDA Forza(MF10), SUZUKI ADDRESSV125, HONDA FORZA Z ABS, HONDA FORZA Z, HONDA FORZA Z, HONDA FORZA Z, HONDA PCX150, HONDA PCX125, HONDA PCX150, HONDA PCX125, HONDA PCX125, HONDA FORZA Z ABS, HONDA FORZA Z ABS, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125
Effective
Installed on a PCX125.
I bought this one because the License Plate attached to the Rear Fender was not a good parenthesis.
I am satisfied with the product as per the Image.
I have been using it for about 4 years now and it is non-trouble.
I think it is an affordable price to change the atmosphere a bit.
View detail
Fits: HONDA Forza(MF10), SUZUKI ADDRESSV125, HONDA FORZA Z ABS, HONDA FORZA Z, HONDA FORZA Z, HONDA FORZA Z, HONDA PCX150, HONDA PCX125, HONDA PCX150, HONDA PCX125, HONDA PCX125, HONDA FORZA Z ABS, HONDA FORZA Z ABS, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125
Made of sturdy steel! Just the right angle!
This is a real Commendation! I've already uploaded pictures of the installation.
"angle" I've added a picture because I don't think there are enough pictures of Really. Just the right angle."
It's a great idea! Also, it's made of steel, so it's durable.
stingy Material:It is better to use Stainless Steel's Universal Bracket to raise the angle of the License Plate than to use the Stainless Steel's Universal Bracket to raise the angle of the License Plate.
This product is more durable and most importantly, it absolutely looks better, so RECOMMENDATION!!!!
View detail
Fits: HONDA Forza(MF10), SUZUKI ADDRESSV125, HONDA FORZA Z ABS, HONDA FORZA Z, HONDA FORZA Z, HONDA FORZA Z, HONDA PCX150, HONDA PCX125, HONDA PCX150, HONDA PCX125, HONDA PCX125, HONDA FORZA Z ABS, HONDA FORZA Z ABS, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125
A little bit to Mischief!
What made you decide to buy?
My 6R I installed Active's Fender Eliminator Kit last year. The Fender Eliminator Kit is designed to meet the new standards for the first year, so the Number angle is a little Large…Number angle is a little Mischief style when you want to DAYTONA.:I came across Slant License Bracket. (Lol) This Slant License Bracket is applicable to PCX, FORZA, and Address. 125. However, the images and impressions posted by users who have installed the product on other models were very helpful and led me to purchase the product.
How was your experience with it?
As expected. The number from the back is not at an angle where you can't see it from the back like the Mischief people, but I think it fits at an angle where you can see it from the back as well. I think it's OK for me, but … that's your own responsibility.
If you are considering purchasing the Slant License Bracket, it has an angle of about 25 degrees. Fender shape to be installed (OEM or Other Brand Product) I think the angle will change with Installation is at your own risk.
[Others]
The number attachment pitch is 12, which can be attached to 125cc to liter machines. The body is compact but solid, and bolt is welded to fix Fender and Number. The following is an example. This welded bolt is about 13-14mm on the Fender side and about 1mm on the Number side. Please be careful when installing the product. The difference in length can be seen visually, and a cap nut and washer are attached to the number side when the unit is packaged.
From here, Active installed in 6R.:If you have installed the Slant License Bracket, you can install the License Plate Light and Number with Limit.:The installation had to be done while successfully crossing the License Plate Light before setting. Also, with the NumberCover in place, it was thicker and I felt that the nut was not tight enough, so I removed the NumberCover and installed it this time. I felt that the parenthesis was more Refreshing and better without the NumberCover. (Lol)
I think it is necessary to check to make sure that it does not come off due to driving vibration when it is last driven. If you drop the number without knowing it when you drive a long distance or drive at high speed, … it is necessary to check it. In my case, the Fender side is tightened with a nut with a loosening stop.
View detail
Fits: YAMAHA CYGNUS X SR, YAMAHA CYGNUS X SR, YAMAHA CYGNUS X SR, YAMAHA CYGNUS X SR, YAMAHA CYGNUS X FI, YAMAHA CYGNUS X FI, YAMAHA CYGNUS X FI, YAMAHA CYGNUS X FI, SUZUKI SKYWAVE250 burgman LIMITED, SUZUKI SKYWAVE250 burgman LIMITED, SUZUKI SKYWAVE250 burgman LIMITED, SUZUKI SKYWAVE250 burgman LIMITED, SUZUKI SKYWAVE250 burgman LIMITED, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman Type S
A little RearMakeover!
Purchased in conjunction with the relocation of NumberSlate to a reflector position above the existing position It was
The reflector part is processed vertically in the middle of a slanted rear fender, so this product is not I did some small work on the Rear Fender side as it is, and bought the Reflector that I bought at the same time I installed it with the kit
The verticality of the OEM was undeniable, but I personally felt that the Refreshing was more cohesive We are self-satisfied
View detail
Fits: YAMAHA CYGNUS X SR, YAMAHA CYGNUS X SR, YAMAHA CYGNUS X SR, YAMAHA CYGNUS X SR, YAMAHA CYGNUS X FI, YAMAHA CYGNUS X FI, YAMAHA CYGNUS X FI, YAMAHA CYGNUS X FI, SUZUKI SKYWAVE250 burgman LIMITED, SUZUKI SKYWAVE250 burgman LIMITED, SUZUKI SKYWAVE250 burgman LIMITED, SUZUKI SKYWAVE250 burgman LIMITED, SUZUKI SKYWAVE250 burgman LIMITED, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman Type S
Impressions!
I wanted to change the look of the standard spec I bought it with the Reflector kit StylishType
The company has an exclusive version for each model of car, but the standard spec. reflector is removed I wanted to install it, so I fitted it, and I wanted another 10 degrees of slope I used rubber plates to increase the slope of the addition, but this was a poorly thought out addition We are honestly satisfied
View detail
Fits: YAMAHA CYGNUS X SR, YAMAHA CYGNUS X SR, YAMAHA CYGNUS X SR, YAMAHA CYGNUS X SR, YAMAHA CYGNUS X FI, YAMAHA CYGNUS X FI, YAMAHA CYGNUS X FI, YAMAHA CYGNUS X FI, SUZUKI SKYWAVE250 burgman LIMITED, SUZUKI SKYWAVE250 burgman LIMITED, SUZUKI SKYWAVE250 burgman LIMITED, SUZUKI SKYWAVE250 burgman LIMITED, SUZUKI SKYWAVE250 burgman LIMITED, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman Type S
Used with ZrX1200R
Motorcycle I bought in second hand was Fender Eliminator but because it was removed
License Plate Bracket is required and purchased here.
I will add Exactly to NORMAL's Fender.
I only have a little bit of angle to the ground. Compared to the commercially available Fender Eliminator, it is nearly at right angles at all.
I think that it is not necessarily flashy.
View detail
Fits: HONDA Forza(MF10), SUZUKI ADDRESSV125, HONDA FORZA Z ABS, HONDA FORZA Z, HONDA FORZA Z, HONDA FORZA Z, HONDA PCX150, HONDA PCX125, HONDA PCX150, HONDA PCX125, HONDA PCX125, HONDA FORZA Z ABS, HONDA FORZA Z ABS, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125
It is very good product of COSPA.
Put this item to cut the Rear Fender of Address and angle it to a near vertical number.
Is it because the vibration is Large in Single? Another Fender Eliminator is a strong Type that also fixes SIDE and more than double the price. Is that necessary?
Certainly, when running after installing, the number is fluttered, but if you prevent vibration from breaking out Number, you can either add Cushion between Number and Bracket or attach License Plate Holder
Is it okay.
There is no extra Bracket next to it, so I'm satisfied as I'm refreshing.
View detail
Fits: HONDA Forza(MF10), SUZUKI ADDRESSV125, HONDA FORZA Z ABS, HONDA FORZA Z, HONDA FORZA Z, HONDA FORZA Z, HONDA PCX150, HONDA PCX125, HONDA PCX150, HONDA PCX125, HONDA PCX125, HONDA FORZA Z ABS, HONDA FORZA Z ABS, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125
Nothing's backwards!
【What made you decide the purchase?】
It is decided that the comment of Impression and the height of evaluation
【How was it actually used?】
Certainly cheap and poor products are different in one taste and lid taste.
【Was it difficult to install? (Hard parts case)】
It was relatively simple as it removes the existing Number and tightens it together. Also handling Instruction Manual is described carefully so it is wonderful.
【Please tell me the point of installation and hang (in the case of Hard parts)】
Do not over tighten Bolt kind, make sure that there is no loose after running.
[Is there anything I was disappointed about?]
This product is TAB screw at both ends, so you can install Nuts if you have one. In other words, since Ploy itself has Screw Mountain on both ends, it can not be used with PlateSingle Body.
【Hope for Manufacturer - Please let me know if you have any improvement points]
I thought I wanted not to weld Screw Mountain.
【Have you compared items?】
License Plate Holder of POSH and so-called pushing raising
[Others]
I am using this product for reverse installation, because it is changing to POSH's Fender Eliminator Kit, the angle of Number is slightly rising so it was a little bit so it is for lowering the angle, please refer to the image. m (__) m
View detail
Fits: HONDA Forza(MF10), SUZUKI ADDRESSV125, HONDA FORZA Z ABS, HONDA FORZA Z, HONDA FORZA Z, HONDA FORZA Z, HONDA PCX150, HONDA PCX125, HONDA PCX150, HONDA PCX125, HONDA PCX125, HONDA FORZA Z ABS, HONDA FORZA Z ABS, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125
Number Transfer
It is good to make it cheap and secure.
As the Number was moved to the back of the Backrest, due to Number which became too vertical mounting, the angle was adjusted with this product.
View detail
Fits: HONDA Forza(MF10), SUZUKI ADDRESSV125, HONDA FORZA Z ABS, HONDA FORZA Z, HONDA FORZA Z, HONDA FORZA Z, HONDA PCX150, HONDA PCX125, HONDA PCX150, HONDA PCX125, HONDA PCX125, HONDA FORZA Z ABS, HONDA FORZA Z ABS, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125
We recommend you to use the home center's Universal stay
【What made you decide the purchase?】 Since the Fender EliminatorSet is not in CBR 250 RR, since I tried to cut OEMFender by myself and turn it into my own Fender Eliminator, since the angle of Number is overturned, I will sell Universal Bracket sold at home center and so on so that it is level with the Tail part of Seat Cowl Although I was thinking to use it by bending it seems weak, friends broke Bracket while traveling in that way Bracket broke and dropped Number So when I was looking for a strong Bracket I found DAYTONA 's Slant License Bracket so I bought it Saw.
【How was it actually used?】 I was worried how much the angle would rise, but I felt it was just too crowded, because it faced the tail cowl just in line with the angle of the original Fender, it's a very nice feeling. Unlike the Universal Bracket of the Home center, it's solid, so it's a bit heavy but it's sturdy and it does not seem to worry about breaking.
【Was it difficult to install? (Hard parts case)】 Bracket itself is easy because it is attached immediately without processing anything.
【Please tell me the point of installation and hang (in the case of Hard parts)】 It's very simple, so it's not particularly.
[Is there anything I was disappointed about?] I wanted to decorate Number Bolt to Bolt, but I am sorry just because I can only use the Bolt included.
【Hope for Manufacturer - Please tell me if there are any improvement points】 I'm happy if you can use decorative Bolt as I wrote above.
【Have you compared items?】 Home center's Universal Bracket
[Others] Although I was worried because there were few corresponding models, I could use it without problems for CBR 250 RR.
View detail
Fits: YAMAHA CYGNUS X SR, YAMAHA CYGNUS X SR, YAMAHA CYGNUS X SR, YAMAHA CYGNUS X SR, YAMAHA CYGNUS X FI, YAMAHA CYGNUS X FI, YAMAHA CYGNUS X FI, YAMAHA CYGNUS X FI, SUZUKI SKYWAVE250 burgman LIMITED, SUZUKI SKYWAVE250 burgman LIMITED, SUZUKI SKYWAVE250 burgman LIMITED, SUZUKI SKYWAVE250 burgman LIMITED, SUZUKI SKYWAVE250 burgman LIMITED, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman Type S
Exquisite angle
I caught OEMRear Fender and wore it when I made it to Fender Eliminator. The angle of Number has become exquisite and idealized. Making well, you can well fix Number and Reflector Bracket to Well. View detail
Fits: HONDA Forza(MF10), SUZUKI ADDRESSV125, HONDA FORZA Z ABS, HONDA FORZA Z, HONDA FORZA Z, HONDA FORZA Z, HONDA PCX150, HONDA PCX125, HONDA PCX150, HONDA PCX125, HONDA PCX125, HONDA FORZA Z ABS, HONDA FORZA Z ABS, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125
Angle adjustment of License Plate
Although it is for Address, I used it for angle adjustment of MONKEY.
Merit is few as it is broken or ugly if you adjust the angle with Bracket selling in Homsen etc. However,
This product is made durable and can be used with confidence.
Do not bounce up the angle like Mischief,
I am very happy with the feeling that it is slightly rising.
I do not know unless it is diverted,
When attached with Match, satisfaction is also Large (Lol)
Just until now Number has stopped with Taper bolt and I made it to Fashion with Bolt cap,
This does not use Bolt, but it makes me feel like Bolt to stay with Cap Nut.
It is not good that it becomes uneasy or uneasy due to vibration etc. Fashion difference disappears.
So I cut one ☆.
If you only mention saying that you attach an angle to Number, it is an undisputed Parts.
View detail
Fits: HONDA Forza(MF10), SUZUKI ADDRESSV125, HONDA FORZA Z ABS, HONDA FORZA Z, HONDA FORZA Z, HONDA FORZA Z, HONDA PCX150, HONDA PCX125, HONDA PCX150, HONDA PCX125, HONDA PCX125, HONDA FORZA Z ABS, HONDA FORZA Z ABS, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125
Cheap and easy
Cut Normal fender and attach it, it seems to have not bought a Fender Eliminator Kit.
However, if you attach it to a vehicle already equipped with the Fender Eliminator Kit, it will be too angled and will violate safety standards.
I think that it is cheaper and easier and better than making your own Bracket.
View detail
Fits: YAMAHA CYGNUS X SR, YAMAHA CYGNUS X SR, YAMAHA CYGNUS X SR, YAMAHA CYGNUS X SR, YAMAHA CYGNUS X FI, YAMAHA CYGNUS X FI, YAMAHA CYGNUS X FI, YAMAHA CYGNUS X FI, SUZUKI SKYWAVE250 burgman LIMITED, SUZUKI SKYWAVE250 burgman LIMITED, SUZUKI SKYWAVE250 burgman LIMITED, SUZUKI SKYWAVE250 burgman LIMITED, SUZUKI SKYWAVE250 burgman LIMITED, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman Type S
Gentle angle adjustment can be performed and it is very satisfactory.I think that appearance from width may also be felt refreshed.angle attachment nonchalant on the Scooter -- carrying out -- recommendation.
Gentle angle adjustment can be performed and it is very satisfactory.I think that appearance from
width may also be felt refreshed.angle attachment nonchalant on the
Scooter -- carrying out -- recommendation.
View detail
Fits: YAMAHA CYGNUS X SR, YAMAHA CYGNUS X SR, YAMAHA CYGNUS X SR, YAMAHA CYGNUS X SR, YAMAHA CYGNUS X FI, YAMAHA CYGNUS X FI, YAMAHA CYGNUS X FI, YAMAHA CYGNUS X FI, SUZUKI SKYWAVE250 burgman LIMITED, SUZUKI SKYWAVE250 burgman LIMITED, SUZUKI SKYWAVE250 burgman LIMITED, SUZUKI SKYWAVE250 burgman LIMITED, SUZUKI SKYWAVE250 burgman LIMITED, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman Type S
It is the completion of a Dress-up up only at attaching. There is also intensity and a Cost performance is also good. An angle is also exactly good touch. Although there is also a product of other company, the direction of the goods here wins b
It is the completion of a Dress-up up only at attaching.
There is also
intensity and a Cost performance is also good.
An angle is also exactly good touch.
Although there is also a product of
other company, the direction of the goods here wins by a low price.
View detail