Reviews
Tank capPad
The texture is good but the detailed workmanship is not good. Holes are misaligned. View detail
Fits: YAMAHA YZF-R3, YAMAHA YZF-R25
Not an exact match.
The texture is good
I think the adhesion is also firm.
View detail
Fits: HONDA , HONDA CB500X, HONDA CBR500R, HONDA Rebel1100 DCT, HONDA CRF250RALLY S, HONDA CRF250RALLY, HONDA CBR650R, HONDA CBR400R, HONDA CB650R, HONDA CB1300SUPER FOUR SP, HONDA CB1300SUPER FOUR, HONDA CB1300SUPER BOLD'OR SP, HONDA CB1300SUPER BOLD'OR, HONDA CB1000R, HONDA 400X, HONDA Rebel1100 T, HONDA Rebel1100, HONDA CBR650R, HONDA CB650R
Exclusive product and perfect for Size
The double-sided tape is in good condition and applies cleanly.
The new condition is clean, but I have a feeling that the soft urethane?material will discolor white after long-term use.
View detail
There is a sticky feeling
If I say it can be peeled off, it can be peeled off. It is sticky.
I expect it will be dirty with Dust on this sticky.
Due to the nature of the material (it does not expand and contract), it is not good on curved surfaces, so it is recommended to make a pattern on paper, etc., and cut it out after checking to see if there are any gaps in the pattern to match the place where it will be stretched.
View detail
Fits: その他 , HONDA CBR250RR(2017-), HONDA CB250R, HONDA CB250R, HONDA CB125R
For Z900RS
The OEM tank pad for the Z900RS was not well designed for the price, and I was looking for a different tank pad. [Color] I found Clear in this product and bought it. [Color] It is Clear, so be careful not to let air in when applying it. View detail
Fits: HONDA , HONDA CB500X, HONDA CBR500R, HONDA Rebel1100 DCT, HONDA CRF250RALLY S, HONDA CRF250RALLY, HONDA CBR650R, HONDA CBR400R, HONDA CB650R, HONDA CB1300SUPER FOUR SP, HONDA CB1300SUPER FOUR, HONDA CB1300SUPER BOLD'OR SP, HONDA CB1300SUPER BOLD'OR, HONDA CB1000R, HONDA 400X, HONDA Rebel1100 T, HONDA Rebel1100, HONDA CBR650R, HONDA CB650R
CapPad Durability & Paste Method
If not applied correctly, it may peel off or break off when Gasoline is refueled. View detail
scratch-resistant
I bought this as a trial, thinking it would prevent scratches to the Tank.
I tried not to be too obvious. [Color] Clear is purchased.
It is smaller than I imagined, and does not seem to have that much cushioning and thickness. The price is not so good.
View detail
subtle
I just put it on the fuel cap to prevent scratching and Makeover.
The texture is thicker than I thought, and because of the largeness and stickiness of Seal, the glue comes out a little. There is a part that Seal is not enough because it is also a Universal Product and Crack enters when it bends a little for thick. Personally, I thought I wanted it to cover everything.
View detail
It's a problem.
I was a little disappointed that the product was smaller than I had expected. The appearance is good, but the adhesive strength is a little weak, so if you don't put it on while warming it up with Dryer, it will come off from the sharp part soon.
Well, if you think about it in terms of cosmetics, you'll be satisfied.
View detail
Fits: HONDA , HONDA CB500X, HONDA CBR500R, HONDA Rebel1100 DCT, HONDA CRF250RALLY S, HONDA CRF250RALLY, HONDA CBR650R, HONDA CBR400R, HONDA CB650R, HONDA CB1300SUPER FOUR SP, HONDA CB1300SUPER FOUR, HONDA CB1300SUPER BOLD'OR SP, HONDA CB1300SUPER BOLD'OR, HONDA CB1000R, HONDA 400X, HONDA Rebel1100 T, HONDA Rebel1100, HONDA CBR650R, HONDA CB650R
Deterioration to Cach Chica Chi …
I installed it on my 2018 CB1300 and used it for about a year and a half.
When I opened the package, it was the resin of the texture like soft Rubber in Carbon Style, and the fixation of the paste was good and the improvement of the appearance and the protection from Tank Bagetc. were fulfilled enough.
However, as the months went by, the deterioration of the plastic parts began to be noticeable.
Gradually, it started to yellow, and the gloss of the surface faded and it became like an aged headlight lens.
The cause is unknown, but it is thought that sunlight and the chemical etc. which were painted in accordance with the car wash etc. may have influenced it.
Initially, it was squishy and flexible, but when I peeled it off this time, it became a completely cured resin and peeled off separately from the glued surface Carbon StyleSeat.
Also, the Carbon StyleSeat and glue left on the cap side was stubborn and difficult to remove…
Unlike other companies' products, it is a design that matches the current Cap, simple design without useless and tacky logo and letters, and I liked it because the price is not so high, but the deterioration mentioned above is regrettable.
View detail
Fits: その他 , HONDA CBR250RR(2017-), HONDA CB250R, HONDA CB250R, HONDA CB125R
It is a good item
There are a number of Tank Pads out there, and this is definitely the one! There are not many things that are
Honestly, this Tank Pad is definitely this one too! It's not something I chose to do.
We chose the shapes and colors that do not disrupt the design and coloring of the vehicle.
As a function, it is similar to the other Tank Pad and is neither good nor bad.
View detail
Large size is halfway through
I purchased this for the purpose of preventing scratches when installing the branded dh-702 Tank Bag from the company
This Tank Bag is easy to use, but because it is attached in one shot with a strong magnet, adhesion is not good I was worried about the possibility of scratching a wide area because of the wide contact surface, and this Seat The size is also appropriate, and the BackSize seems to fit somehow in ESTRELLA I thought I could finally use this Back
Actually, I was thinking about the Seat size before I bought the Seat, because I thought it might be too small for one piece The actual result of the mold matching is just short of the length and width as I expected
If you advocate the prevention of scratching when using the Tank Bag, at least Seat's Large size can be used for the self-sold I'd like you to use BackLarge Kisa as a benchmark
Or you can get an extra large seat-size piece of kit, cut it off and use it for other purposes And there are places
I'll buy a second one in the future to prevent it, but it's not as easy to use as the first one is bad
The fit is almost OK on a flat surface, and the fact that it can be used repeatedly on non-uneven surfaces is a good thing Thanks
I wish they thought a little more about merchandising, Ideas is good and a product you won't find anywhere else I think it's a great waste of time for only
View detail
Fits: KAWASAKI NINJA400 (2014-), KAWASAKI NINJA250R, KAWASAKI Ninja ZX-25R SE KRT Edition, KAWASAKI Ninja ZX-25R SE, KAWASAKI Ninja ZX-25R, KAWASAKI ELIMINATOR SE, KAWASAKI ELIMINATOR
I put it on for some reason
I don't use the Tank Bag, so it may not be necessary, but it's just something to look at
It's not something that will get in the way, so I'll just say it's for the purpose of preventing scratching other than the Tank Bag
View detail
Fits: SUZUKI GSR750, SUZUKI GSX-S1000, SUZUKI GSX-S1000F, SUZUKI GSX250R, SUZUKI DL1000 V-STROM250, SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSR250S, SUZUKI GSR250F, SUZUKI GSR250
So so
Material after one month of use:Carbon Style is half gone
What do you mean by the pattern disappearing when you haven't done anything particularly abrasive?
If you are planning to buy one, you might want to consider another Manufacturer
View detail
Hard to install on anything but flat surface
Agree with other reviews this time. It can only be installed on a completely flat. The hardness of the plastic does not flex. I tried cutting into smaller pieces to aid installation. The glue is good and easy to attach though. View detail
Real scratch prevention Seat [Temporary use]
I bought it and pasted it immediately.
Application is to hang Side bag with long distance Touring, so paste on the part where SIDE's Shroud and Back are rubbed.
Because Shroud is moderate but it is a tertiary surface, in the purchased state of Large, Quantity : 1pc. I could not paste in.
Although it divided 2, it still can not do.
Even if you make a mistake please do not buy with enthusiasm to put on third order surface.
To the last, if you think that it is temporary Seat to prevent scratches, whether bent or not, I do not mind bubbles entering (As soon as you peel off)
It is a recommendation for that person.
View detail
& Adhesive power is weak, floats and shifts than expected. Or [ that a thinner film type is enough if it is a measure against a small crack ].
& Adhesive power is weak, floats and shifts than expected.
Or [ that a thinner film type is enough if it is a measure against a small crack ].
View detail
it is [ stick / continue / since it is thick ] easier to separate than a thing -- although it comes out and sushi appearance also worsens, since resticking hears and it can also use only when [, such as touring, ] required, I think that it is convenient.
it is [ stick / continue / since it is thick ] easier to separate than a thing -- although it comes out and sushi appearance also worsens, since resticking hears and it can also use only when [, such as touring, ] required, I think that it is convenient.
It is a recommend in the direction which cares about a small crack.
View detail