Reviews
Fits: SUZUKI Gixxer SF 250, SUZUKI Gixxer 150., SUZUKI Gixxer 250, SUZUKI Gixxer 250
It is still convenient to have it.
My family used to ride a Motorcycle with a Carrier and a Box, which was very convenient, but when I replaced it with a Gixxer 150, I wanted to break the styling and held back, but when I decided to go camping, my family bought it for me. It is very convenient to have it, isn't it?
Kijima I was confused between
https://www.webike.net/sd/24294569/
The Bracket comes out from the bottom and seems strong, but it is in the way or martial. And the length of the cargo bed? The depth of the cargo bed looks short, and it looks small when it is a Large type box.
[ENDURANCE I was quite torn between the two. This one was my main choice, but
https://www.webike.net/sd/24465238/
If Tandem and Camping are the main, it is nice as Firmly, and the overhang of the Grip makes it stable even if you put your luggage on the Seat. It is very good, but it is too firmly and tough. (Lol)
I might not normally wear a box, I mean, I'd prefer to be as inconspicuous as possible.
So, by process of elimination, I decided to go with the DAYTONA that I had refreshed.
Actually, it was on my family's Gixxer 150 and I thought I could divert it, but the shape is different and no good. So I went with this one, but the Right in the image is until 2019 and the Left is 2020- Surprisingly, it is short…
If I put a big box on it, the Tandem seat might be too tight to ride on. (Lol)
I'm sure that the material and paint will be the same, so I'm sure this will rust as well. I'm sure that all the Manufacture's products will rust, but it might be better to cure this area with something before installation. Therefore, the quality is strictly rated as *4.
It is strictly because it is cheaper than other Carriers, but it may be higher than other car models, so CP is also *4
But, overall, it's cheap and holds up well in use, so I gave it an overall rating of 5.
The installation will be done after the curing is done and the box will have a 43 liter GIVI box, so I'll have to think about the Extension Bracket before I can install it!
View detail
Fits: HONDA CRF250L, HONDA CRF250L RALLY, HONDA CRF250RALLY S, HONDA CRF250RALLY, HONDA CRF250L RALLY, HONDA CRF250L
Not just loaded Up!
Please tell us the reason for your purchase.
I purchased this product to increase the load capacity of my CRF250L (MD47).
Was the one you received as per Image?
It is semi-glossy and luxurious, not too large and not too small, but exquisite.
It looks strong.
Was the installation difficult?
Installation is easy, although some force is required. It is easier if two people work together.
You should use anti-scratch Tape or Dustcloth on the Body. It will be scratched before you know it.
How was your experience with it?
The loading capacity has increased. I am satisfied. The Tanax Sport Seat Bag was Exactly.
The Carrier has made it easier to maneuver the vehicle. It is an unexpected effect.
Less than a year after installation, the Mounting Bolt was Rust.
View detail
Very good Carrier
The seat and carrier are flush with each other, which makes loading the touring bag more stable.
Note that a part of the Carrier interferes with the Slender Seat made by GOODS, so it can be installed, but it is quite tight.
View detail
Fits: SUZUKI Gixxer SF 250, SUZUKI Gixxer 150., SUZUKI Gixxer 250, SUZUKI Gixxer 250
Loadability Up
I purchased this product because there are no Loading Hooks around Gixxer 150 and Rear Sets.
Rear Sets and Flat will likely increase load capacity.
Installation is as simple as removing the Rear Sets and bolting it to the OEM Grab Bar, but there is one point to note.
A collar is placed between the carrier and bolt hole, but if you are not careful, the collar will fall into the Seat Cowl during installation, making it difficult to remove.
I did it.
Also, it seems that the Rear box cannot be installed, so those who want to install the Rear box should be careful about that as well.
If you don't need a rear box, but want to carry a large-size load for occasional shopping or touring, this is an Exactly.
View detail
Fits: HONDA Rebel300, HONDA Rebel 500, HONDA Rebel 250, HONDA Rebel 250
It is strong.
The load can be loaded flat and secured securely.
The sturdy construction ensures that both luggage and Motorcycle are stable and safe while riding.
It is a pricey but convenient Carrier.
View detail
Fits: HONDA VTR250, HONDA VTR250, HONDA VTR250, HONDA VTR250, HONDA VTR250, HONDA VTR-F
Rugged Rear Carrier.
The steel pipes are thicker and more rigid, so there is no sense of insecurity even when a rear box is mounted on them.
This Carrier is highly recommended for those who are loaded.
I used it for about 2 years and never had any Rust or any breakage/cracks.
I think it is durable enough.
Once you get used to it, you will be able to attach and detach the Carrier in one piece without having to remove the Plate section.
Since the seat cowl is easily scratched by interference, remove the Plate section as per the Instruction Manual, and then remove the Quantity section.:Pair (for Left and Right) It is safer to separate them into Bracket.
View detail
Fits: KAWASAKI ZRX1200S, KAWASAKI ZRX1200S, KAWASAKI ZRX1200S, KAWASAKI ZRX1200R, KAWASAKI ZRX1200S, KAWASAKI ZRX1200R, KAWASAKI ZRX1200R, KAWASAKI ZRX1200R, KAWASAKI ZRX1200R, KAWASAKI ZRX1200R, KAWASAKI ZRX1200R, KAWASAKI ZRX1100II, KAWASAKI ZRX1200R, KAWASAKI ZRX1100II, KAWASAKI ZRX1100II, KAWASAKI ZRX1100II, KAWASAKI ZRX1100, KAWASAKI ZRX1100, KAWASAKI ZRX1100, KAWASAKI ZRX1100
ZRX1200 Carrier
Its really beautiful & fits my ZRX1200R motorcycle. I am satisfied with the product. Its look so solid & tough. All you need to do is buy a box & bracket to fit with the carrier. All girls will look at your and i am pretty sure they will ask for the phone number for the date. Don't miss to buy this carrier guys, i promise that you guys will look more masculin then before View detail
It is easy to install.
It was as per Image and was easy to install.
Included Parts:were all included.
For installation hang, you can attach the carrier bar first, loosen it without tightening it, and then attach the cargo bed. 。 If Carrier has a request, it would be helpful if you could include a spare Nut?Screw.
View detail
Fits: YAMAHA BOLT, YAMAHA BOLT Shoulder Bag R Specifications
For Seat bag installation
It is inexpensive, easy to install, and ideal for mounting a large Seat Bag. View detail
Sense of unity with Rear Sets
Installation is easy and can be done by beginners.
The sense of unity after installation is also good.
Rear Footpeg Installation Bolt etc.
It's relatively hard and tight, so you'll need a Chica La.
View detail
Fits: HONDA Rebel300, HONDA Rebel 500, HONDA Rebel 250, HONDA Rebel 250
Convenient!
I had been using the SeatBack on my OEM Tandem seat, but I couldn't get it to work properly, so I bought this product.
It is easy to install, and I am satisfied that my luggage and SeatBack can be fixed stably as expected.
View detail
Fits: HONDA CRF250L, HONDA CRF250L RALLY, HONDA CRF250RALLY S, HONDA CRF250RALLY, HONDA CRF250L RALLY, HONDA CRF250L
Expected
I was able to put it on without any problems.
I'd like to have a little more front and back length.
View detail
Well, for the time being, I guess.
There are not many carriers that can be attached to the Gixxer 150. They are either OEM, DAYTONA, Endurance, or SHAD.
Like the DUKE, the underside of the box, which is not usually visible, is prone to rust. (Lol)
Also, like DUKE, if you don't extend the Carrier, the TandemPartner is too narrow if you put a 40 LOver Box on it!
Well, I guess that'll do for now.
By the way, DAYTONA Item number:17448
https://www.webike.net/sd/24232576 /
The difference between the two is the Helmet, but it's too much trouble to remove the Seat every time, so this is fine. (Lol)
View detail
Can be used in multiple ways as a carrier or for Top Case
Yamaha does not recommend the simultaneous installation of a side case and top case (so-called "three-boxing") on the Tracer 900 due to the negative effects on aerodynamics and handling, but the installation of a carrier is necessary to increase the load capacity.
As for Parts, Carrier for Top Case of Y's Gear OEM is prepared, but the price is high and it gives up because of the Yamaha Top case line goods. The price of this product made by DAYTONA is also reasonable, and I bought it because I have it in mind to use it as a carrier even if I do not install the Top case.
Initially, I used the seat bag that I wore on the back seat by transferring it to the Carrier, but since the GIVI Mono Rack base has Exactly holes drilled in it, I am now using an old GIVITop case that I had in my possession that I had been keeping dead.
Because the pipe diameter of the carrier is a little thin, and there is a little anxiety about the strength of the weld, I use it by observing the weight limit of the Instruction Manual (the largest load capacity including the Samurai of the case is 5kg) (my case weight is about 3.5kg, small 30L).
Top case with a lot of capacity will need to be careful because the weight of the case itself will be more than 5?
I don't feel the effect of the Three Box system on Handling when driving on ordinary roads, but I have to drive at a lower speed on highways.
View detail
Fits: KAWASAKI ZRX400II, KAWASAKI ZRX400II, KAWASAKI ZRX400II, KAWASAKI ZRX400II, KAWASAKI ZRX400II, KAWASAKI ZRX400II, KAWASAKI ZRX400II, KAWASAKI ZRX400II, KAWASAKI ZRX400II, KAWASAKI ZRX400II, KAWASAKI ZRX400II, KAWASAKI ZRX400II, KAWASAKI ZRX400II, KAWASAKI ZRX400, KAWASAKI ZRX400, KAWASAKI ZRX400, KAWASAKI ZRX400, KAWASAKI ZRX400, KAWASAKI ZRX400, KAWASAKI ZRX400
A very good heavy duty multi wing rack
I really like this product i bought for my rear rack of my ZRX400 it is really high quality as it fits perfectly on my bike. The plate itself is solid made where i could hook any loose item i might have. It is also easy to install and only need a few tools to instal the item. The cost bs the usability is a steal. It will save me money overtime rather than bringing my car with me. The item arrived is an acceptanle duration. Item is will packed with the instruction how to install the item. I would suggest to buy quality top box so the item could secute the top box perfectlym View detail
Fits: HONDA Rebel 250, HONDA Rebel 500, HONDA Rebel 250, HONDA Rebel300
Easy to install
When I received it, it was larger than I expected. Is Rebel this wide? The size was so large that I thought I got the wrong one. I'm very happy with it.
I just installed it and it looked good.
It's easy to install.
The Bolt on the side of the REBEL is hard to remove, and when I installed the Side bagBracket, I couldn't remove it and put it on with a knapsack.
↓
I had to go back to Naps because the screw locker would not come off and the local motorcycle shop would not take it off.
It took some effort to install, but this itself and the installation was instantaneous.
View detail
Fits: HONDA Rebel 250, HONDA Rebel 500, HONDA Rebel 250, HONDA Rebel300
Easy to load various bags of DAYTONA
Since it is difficult to load luggage on the REBEL 250, you will have to attach a side bag or seat bag.
I decided to put on the Rear Carrier because I was a little worried about the seat bag alone.
I used to use mainly the Side bag, but now that I have the Rear Carrier, I use mainly the Rear bag.
The fact that it can be used for Grab Bar means that it is well made.
I used it with KIJIMA's Side bag support, and the angle of the bracket is just right, and the finish is not uncomfortable even when the Side bag is not on, which is kind of nice.
The part for luggage is about 30cm wide, and this is the same width as the bag on the DAYTONA Henri Biggins, so even if you have people on the Tandem, you can load up a bag for camping. If you are going to play around the neighborhood, I think it is enough. This time, I put on the 2-way Seat bag, and it is just right.
The height of the bag is just right with the double seat of the Grom Parts, so even a bag with a slightly larger size can be loaded well.
Although it is not a difficulty of this Parts, the bolt of Rear Fender of Rebel 250 is too tight and it is difficult to remove.
Also, when you retighten the bolt, if it is not aligned with the bracket and support of the Rear Fender, the screw hole will be ruined soon. If you are worried about this, it is better to have a motorcycle shop do the installation.
View detail
Fits: HONDA PCX125, HONDA PCX150, HONDA PCX160, HONDA PCX125
The hooks on both sides are the key.
GIVI:GIVI:[Repair Parts] Monokey Base [E251] Installed for the installation of the
If you can remove the Rear cowl cover of the PCX series, you can install it.
Since it is made by DAYTONA, the above GIVI Monokey base can be installed with only Bolt.
In addition, the feathers that stick out like hooks on both sides are good because they can be used as a loading hook when the top box is not in use, and can be used to secure the bag with a net or something. If you are not using a top box, the wings that stick out like hooks on both sides can be used as a loading hook to secure the bag with a net or something. (^^)
View detail
Fits: HONDA CRF250L, HONDA CRF250L RALLY, HONDA CRF250RALLY S, HONDA CRF250RALLY, HONDA CRF250L RALLY, HONDA CRF250L
It doesn't come easy.
Ahead (Seat installation side) The mounting part of the
The width of the seat is narrower than the width of the seat, and it is made as if the seat is torn when you take it on and off.
Even if you want to insert a color later, the color plays a role in fixing Seat, and
If you don't get Seat, you don't get Color, and if you don't get Color, you don't get Carrier.
It was a three-way situation. It was. "Even compressed the width of Seat by hand. I couldn't think of a way to say
I had no choice but to change the Bracket of Carrier to Quantity:Pair (for Left and Right) I decided to cut 10mm and put 10mm Spacer.
I thought the ease of removal would be dramatically improved.
In the Handling Instructions Manual. "Wound may be present during installation." Is this what you're writing about?
View detail
One of the best sleek design rack!
PRICE: Make sure you register an account to receive additional 5% discount. DELIVERY: Well packaged, it's fully bubble wrapped and comes in good considition. MATERIAL: WeBike is trusted by the community, so rest assured the material is in high quality. I have installed it on Honda SuperFour Spec III, just make sure you double check the model is sutiable on your motorcycle before ordering. INSTALLTION: I considered myself a beginner, installing this rack is no-brainer. The instruction is in Japanese, you just have to follow the drawing and everything will as easy as ABC P.S: I have not installed my top-box, will update my review after tomorrow if they allow me to edit. - A happy Singapore customer View detail