Reviews
![[DAYTONA x AC SANCTUARY] RCM Concept COZY Seat [COMP]](https://img.webike-cdn.net/catalogue/images/101907/24329_TS.jpg)
Fits: KAWASAKI Z900RS SE, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS
A little disappointed.
The design is great, but long touring is a pain in the butt for me personally.
As a result, I purchased DAYTONA's Gay Lupinz.
View detail
The more you use it, the more you understand! he said.
The more you use it, the more you will know! I had a sore butt after 150km of touring, but the distance was a little longer than the OEMSeat and the pain was a little less (personal opinion). The footing is a little worse when stacked because of the thickness. Also, if you don't attach the strap, the tongue will look obtrusive. View detail
For Automobile Inspection Case
I had to tuck it under the Seat because there was no place to store the vehicle inspection certificate.
However, the tag portion of the electronic vehicle verification had become folded in and was about to become unusable as it was, so I installed it as a countermeasure.
The size is a bit large for a car that is not an applicable model, but it is easy to install. However, the attached tape is weak, so be careful when removing it many times, as it may come off including the tape.
View detail
Size is delicate for my Motorcycle.
The space under the Seat of VSTROM250SX is a little large, so I decided not to paste it. I ended up throwing it into the Rear box. I could have used a normal container if I wanted to. View detail
![Cozy Seat [COMP] Short Low Plain](https://img.webike-cdn.net/catalogue/images/108716/41109_TS.jpg)
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400
Great footing, Seat hardness will be just right!
The replacement process is very easy.
If you only pay attention to the direction of installation when replacing the OEMSeat bumper, there is nothing else you can do wrong.
Also, the improvement in footing after the replacement is very good.
The back half of both feet can now be attached, which was not possible before the replacement, and it is now possible to maneuver the vehicle while riding in it.
I am satisfied with the Large as it leads to a sense of security when stopping.
Seat hardness may feel hard when riding in cold weather. But after a little while, it becomes moderately hard and can withstand a long time ride.
I think
View detail
![COZY Seat [70s Series] Type K0](https://img.webike-cdn.net/catalogue/daypic140709/74922_1_l_TS.jpg)
Absolutely fantastic
Very impressed with the customer service and communication, definitely earned my trust for future purchases, thanks guys :) View detail
![(COZY Seat) [COMP]](https://img.webike-cdn.net/catalogue/10054/76200_1_TS.jpg)
Fits: KAWASAKI ZRX1200 Daeg, KAWASAKI ZRX1200 Daeg, KAWASAKI ZRX1200 Daeg, KAWASAKI ZRX1200 Daeg, KAWASAKI ZRX1200 Daeg, KAWASAKI ZRX1200 Daeg, KAWASAKI ZRX1200 Daeg, KAWASAKI ZRX1200 Daeg, KAWASAKI ZRX1200S, KAWASAKI ZRX1200S, KAWASAKI ZRX1200S, KAWASAKI ZRX1200S, KAWASAKI ZRX1200R, KAWASAKI ZRX1200R, KAWASAKI ZRX1200R, KAWASAKI ZRX1200R, KAWASAKI ZRX1200R, KAWASAKI ZRX1200R, KAWASAKI ZRX1200R, KAWASAKI ZRX1200R
Parenthesis good?
Silhouette from the side is the best!
I ride my Motorcycle every holiday to sit on this Seat.
I thought the lower Seat height would make the knees tighter, but the Large is sturdy! (Height 170 cm, short legs)
The handlebar is also raised, so it is almost in a vertical position.
Instead, there are no more gaps than in NORMAL. (16 year old ZrX1200 DAEG) No complaints at all.
It was also very fast from the order!
View detail
![(COZY Seat) [COMP]](https://img.webike-cdn.net/catalogue/11095/46886_TS.jpg)
Fits: SUZUKI GSX1400, SUZUKI GSX1400, SUZUKI GSX1400, SUZUKI GSX1400, SUZUKI GSX1400, SUZUKI GSX1400, SUZUKI GSX1400
Position is set and my hips don't hurt.
I had been using the OEMSeat for 18 years and recently my hips started to hurt, so I added a Cushion to it. It was the right decision ?It is cool and comfortable now, and I used to get sore after about 50km, but the other day I ran about 100km and it was Large sturdy. View detail
GelCushion
I bought DAYTONA's SupportGelCushion, which had a good reputation around me, because my buttocks hurt from Touring.
I went Touring after putting it on and it improved a lot.
It was nice to have less pain in the buttocks, even when touring long distances.
View detail
![COZY Seat [LITE-S]](https://img.webike-cdn.net/catalogue/10054/77676_1_TS.jpg)
Can also be installed on RH09, seat is wider and buttock pain is considerably alleviated.
I was concerned that the RH09 OEMSeat, because of its forward-lowering and slippery epidermis, would move closer to the Tank side.
Although not compatible, I found an example of installation on RC90, so I bought it thinking that it could almost go there in terms of shape.
If you attach it as it is, the clearance with the DummyTank side will be tight, and it will rub against the lid when you open it.
If you use a RubberWasher on the mounting area, it will fit in the rear of the car body.
There are several differences from OEMSeat, but I felt the following in the order of Large Kimono
1.Epidermis is hard to slip
2.Seating surface (especially in the rear) is quite wide
3.The front section is also wider, so the footing is slightly less comfortable.
1 and 2 have considerably alleviated the pain in the buttocks during long rides.
As for 3, the footing feels as if the Seat height has been raised by 1-2 cm, but it does not bother me that much.
The concavity and shape of the DummyTank section does not match the shape of the DummyTank, so there is some discomfort when looking closely, but I am very happy with the reduced pain during the ride.
View detail
Used in Touring!
This is the third time I have purchased this type of product. I used it for camping touring for 2 days and 1 night in October. The touringStyle:Underwear for winter and leather pants on top + Underwear for winter, MiddleWear and leather jacket on the bottom. The Seat is a combination of Touring Support Gel + Airs Lucyto. I can feel the effect of AirSlucyte directly when I drive on the highway at high speed. When I went touring in Hachimantai Onsen in late October using only the Touring Support Gel, I felt no jittery sensation that comes before the buttock pain occurs. I think the combination of Touring Support Gel + AirsLucyto is the best. I thought about it when I was doing the settee ing. I thought at the time of Sette Ing, the length of Magic tape in front was not long enough at all, as if it was not designed to be used for Scooter. This is the first time this has happened to me. Shame! I guess the best thing to do is to run with the best support to keep my butt in shape. View detail
For Seat Repair.
[How is it used?
I had a Seat with Hole and considered reupholstering it, but decided to purchase this product just in time for now.
I didn't know what glossy would look like, so I chose the safe, matte-free Type.
How was your experience with it?
It is easy to cut and paste the image to an appropriate size with scissors.
It has been about a month since I put it on the area of concern as shown in the picture and there has been no change.
Since it is rather thick and does not seem to track well, it is likely to peel off quickly in three-dimensional areas.
As mentioned by others, the cut is white, so it stands out a bit, so if you are concerned about it, you should apply black paint before applying.
How did it compare to other products?
This is my first purchase of Seat's RepairSeat and so far I am firstly satisfied.
[Points to note]
It is not suitable for very complex areas.
【Review】
In the meantime, applying it as a first aid measure will prevent the condition of Sponge from worsening.
I think that reupholstering or replacing the Seat would be a good fundamental measure, but if you are not up to that level, this is a good product for you.
View detail
Fits: HONDA CB1100 RS, HONDA CB1100, HONDA CB1100
For those with numb stiff legs
The 1100RS Normal seat causes numbness in the knees after 1h of riding because the knees are Tight,
I replaced it along with footpeg and it is better.
I have no dissatisfaction with the quality and design, but I have to note that the hole to attach the OEMBush is small.
It requires some work such as widening with Reamer, and the Pipe frame at the Rear end is fully visible.
I've been using it for a year and my butt has never been sore, no deterioration or he Sauce.
View detail
The workmanship is crude.
The reputation is so-so, so I bought it. It was installed immediately.
I noticed during installation that one of the holes in the mesh was frayed, which was disappointing.
I am wondering if I should request a replacement, but I am hesitant to do so considering the time and effort involved.
View detail
Fits: KAWASAKI GPZ750R, KAWASAKI GPZ750R, KAWASAKI GPZ750R, KAWASAKI GPZ900R, KAWASAKI GPZ900R, KAWASAKI GPZ900R, KAWASAKI GPZ900R, KAWASAKI GPZ900R, KAWASAKI GPZ900R, KAWASAKI GPZ900R, KAWASAKI GPZ900R, KAWASAKI GPZ900R, KAWASAKI GPZ900R, KAWASAKI GPZ900R, KAWASAKI GPZ900R, KAWASAKI GPZ900R, KAWASAKI GPZ900R, KAWASAKI GPZ900R, KAWASAKI GPZ900R
It's cheap and I feel like I made a pretty good purchase.
I think this RIPMOSEAT is for reupholstering a Normal seat, but I tried to reupholster a PMC Tuck Roll Seat that I had previously purchased from Webike. So I was a little worried, but as a result, I was able to reupholster it without any problems.
The PMC Tuck Roll Seat was partially tacked on with Bond, which took some time to remove.
Stapler can be removed with a slotted screwdriver and pliers.
Now we need Tucker.
I used the Instruction Manual for tensioning as a reference, but instead of stopping at Tucker, I used 20 large clips and tensioned PinPin so that the wrinkle would not be too close, which worked rather well.
Now all that is left is to stop the bishop with a Tucker.
The ride is nice! I love it so much because my previous Seat was a Kachica. It's like my butt doesn't get sore. It's cheap and I feel like I made a good purchase.
View detail
Helmet in is now comfortable!
Used for Helmet in CYGNUS X Type 2.
I purchased the DAYTONA Helmet-in Pocket to store small items such as documents and gloves, but the Helmet-in has become more comfortable than I expected.
I purchased the M Size and it was just the right size for the back of the CYGNUS Seat.
View detail
This combination! Best? Mesh seat is really good.
Except for the SupportGel's Support power, it is the best product.
With the replacement of my Motorcycle, I wanted to return it to OEM condition from Balance of Seat and Handlebar height on a vehicle that had been Anko'd out.
However, we had been looking away from replacing the Seat and Anko-boosting because it costs a lot of money, and then we found this product!
Moreover, the mesh seat, which I was definitely going to put on, was also attached, making it the most powerful.
The SupportGel is quite amazing at retaining heat when heated in the middle of summer, and as you can see when you sit on it, it makes you feel very uncomfortable.
Aaah .... My whole ass is soft and heated ..." This is a very unpleasant state of affairs.
Therefore, Mr. DAYTONA uses Mesh as Quantity:They are going to make it a Set, "Super" This is a god company that understands how Rider feels, and yet, they have made it into a product. I respect them, I really do.
This combination is inevitable.
So, as far as effectiveness, I have to admit that the butt-relaxing effect was not as good as I had hoped for as far as the seat cushion portion is concerned. I've sat on several of the sameConcept Seats, but not as much as the EFFEX Gel Zab product.
However, it is not all that effective! If you are having trouble with Seat, you may want to consider this!
Because you can never sit in the EFFEX Gel Zab in the summer!!!! That thing is a Mesh must too.
The feel together with the Mesh part is good. However, it is a little small. It is recommended to measure the size in advance.
I no longer feel any discomfort with this on my OEMSeat, but I think some car models may not be allowed to have this on them.
But, well, it's comfortable... I think it would be good to have a Mast for Adventure type Motorcycle and so on.
The footing will still be poor, so this is something to consider!
Wishing you all the best in your midsummer Motorcycle life!
View detail
Vehicle Inspection Exactly
ExactlyM size was just right for DIAVEL. A long-standing problem was solved. View detail
Fits: KAWASAKI GPZ900R, KAWASAKI GPZ750R
It took a while, but I was able to put it up on Beauty.
I bought this for my first Seat Replacement Challenge.
Because of the discounted price, we took the plunge and purchased the work.
It took some time, but we managed to do the work.
The time it took was due to my lack of work sKill, not a problem with this product.
I am satisfied with the finished product.
It was not possible to stretch well on Songe, which is uncoated at first.
Urethane for RIPMOSEAT is purchased separately and Quantity:Worked on Set.
View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400
Non-slip Seat
Purchased to make Seat Simple.
The cushion is chewy to the touch, which may be to your liking, and the seat is thinner and narrower, so the footing is much better. The seating position is lower, so the forward footpeg may cause some leg and stomach pain, depending on your body type. Also, it is not compatible with Normal fender or slightly shorter fender. It is recommended to wear it with the company's Micro miniFender at the same time.
View detail