Reviews
Looks Good
Looks good to me.
It was very difficult to install.
I followed the instruction manual, but the bolt holes do not fit.
I managed to install it by force.
What's wrong with the body of the car lol.
Bad parts?
View detail
You can put it on yourself.
It was easy to install, although the bolt needed to be temporarily fixed. View detail
It's a good thing to have.
I brought it as an insurance policy when I participated in SSTR for the first time.
After finishing the race safely, I stopped my motorcycle at the Side Stand to take a commemorative photo at Senrihama,
The sand buried the STAND and nearly knocked the Motorcycle over.
Without it, the impressive Senrihama was ruined.
I will take this opportunity to carry it with me at all times.
I'm glad I bought it!
View detail
For the price
Flimsy for the price and concerned about durability
It's Matte compared to OEMs and the products
Balance of the overall appearance because of its linearity.
I think it's too obvious that it's going to fall apart, or that it's going to be too bad.
How does it fit if the rear suspension is changed?
I'm sure there are other options out there.
I think we should be very selective about the variety.
View detail
If only it were a little cheaper
I am glad that they have repair parts. I wish it was cheaper... View detail
Fits: HONDA Hornet 250, HONDA Hornet 250, HONDA Hornet 250, HONDA Hornet 250, HONDA Hornet 250, HONDA Hornet 250, HONDA Hornet 250, HONDA Hornet 250, HONDA Hornet 250, HONDA Hornet 250, HONDA Hornet 250, HONDA Hornet 250
A talisman.
The protruding Tank of HORNET, seriously? If you knock it over, it will probably hit the ground after all, but it might be able to catch the impact once. (In the first place, it is not Tank protection, but Engine protector.
BoltQuantity for installation:2pc. 2pc. 2pc. 2pc. 2pc.:Pair (for Left and Right) If you want to remove one pc at a time, you don't need to jack-up anything. Nut is not attached to the car body side, and the thing of the car body side is reused.
Design is normal for better or worse, so there is no sense of discomfort at all in the wearing state.
View detail
What's the point of sending it like this?
Sagawa sent me a ball in a large box with a mark on it where they peeled off the invoice. (Lol)
Was it a returned item? I doubted for a moment that it was a returned item, but I decided that it must have been ordered from the manufacturer and sent directly to me.
I like that it's made of steel pipe, but the Both Sides Guard is split... there's only one place to stop it, right?
Am I crazy for thinking it was molded in one piece like a certain Mr. SSB?
I'm not sure if this is really large enough. I'm worried about it, but... it's better than nothing.
It might hold up if it's tipped over at a right angle, but if it falls over and slides, or if it gets hit from an angle or sideways...it might go...is it Large or strong?
I can't even test it myself................... (Lol)
View detail
Fits: KAWASAKI D Tracker 125, KAWASAKI D Tracker 125, KAWASAKI D Tracker 125, KAWASAKI D Tracker 125, KAWASAKI D Tracker 125, KAWASAKI KLX125, KAWASAKI KLX125, KAWASAKI KLX125, KAWASAKI KLX125, KAWASAKI KLX125
Great for stepping stone guards, not a skid plate.
You can't use it as a skid plate because the mounting screw sticks out, but it is useful to guard against stepping stones. You should put it on when you drive on the forest road. View detail
z900RSPipe Engine Guard installation
Installed to reduce damaging effects of standing and falling.
It looks like a car school instructional vehicle after it's installed.
The Matte Black paint job is surprisingly unobtrusive.
Installation is easy if you follow the Instruction Manual.
View detail
It's dangerous for some people.
Guard performance, quality and accuracy
This is indeed DAYTONA.
There is no mistake.
Just …People with large feet are dangerous!
I'm 28? and my foot hits the Guard and the quantity of GEAR and rear brake.:Pair (for Left and Right) I can't step on the Pedal.
GEAR is still good, but I think Rear brakes are dangerous.
I was scared many times when I rode with Boots etc.
The product is good and I would like to see DAYTONA put the Guard in front of the Pedal a little more forward.
Size of the foot is Large, please be careful!
View detail
Fits: SUZUKI GSX1300R Hayabusa, SUZUKI GSX1300R Hayabusa, SUZUKI GSX1300R Hayabusa, SUZUKI GSX1300R Hayabusa
Self-installation (*>_<*) no
If you ask a motorcycle shop, it will cost you a 10,000 yen bill, so I installed it by myself. I bought a Chinese 22mm hole saw for 498 yen and waited for 3 weeks. I bought a Rear Wheel stand for 1980 yen from Amazon (This is GSX1300R HAYABUSA easily raised and works more than the price) and used Front Wheel Clamp. Confirming the position of the hole opening with the attached paper, first of all, from Left. The position of this one was decided in one shot, but the Right Side has been gapped about 1 cm, and it was able to adjust and install after a shaky start. The adjustment part is hidden by the protector, so it looks OK. View detail
Fits: YAMAHA SR400 19, YAMAHA SR400 19, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400
It drops to this position
The Center Stand is lowered more than I thought it would be Since I occasionally tour on the main route to work, I do not think it does not affect that much If you don't do aggressive driving, there may not be any problem, but it is a delicate point for those who want to run down View detail
Fits: YAMAHA XSR900, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09, YAMAHA XSR900
There may be a quality difference
I had it installed at the shop when I bought my new car LargeI was happy with it, but it cracked after 2 years of installation I never once hit it by standing or falling There may be a difference in the quality of the individual pieces, but I think it's a bit of a shame View detail
To not give up parking on the road
When you go out to a rural area, parking space is not always pavement
Even if you hang the Side Stand on top of the clay base, it seems to lean gradually and I don't feel sorry for it It was
My model didn't have a Side Stand Plate at the time, and I was worried that it would come off while driving There is, and I don't really like it
The included rope and hook are a hindrance when you're carrying it around, but once you use it, you'll understand
There is no need to move it to a place with good ground and then come back for this stand holder
I was forced to buy this stand holder, but I always put it in SeatBack when I go out I am
View detail
Fits: SUZUKI GSX1300R Hayabusa, SUZUKI GSX1300R Hayabusa, SUZUKI GSX1300R Hayabusa, SUZUKI GSX1300R Hayabusa
It is a standard product
As for installation, when Cowl was removed, Cowl's
Drilling was done.
I think you can do it while it is attached
Sponge inside Cowl and Cowl's facet are Engine part
Because it enters into, it is troublesome, but when you remove it to do it
It is recommended.
I think that the effect will be useful for standing.
I'd like to have not only Black but also other colors.
View detail
Very Simple!
Since I got stuck on standing out, I installed it immediately after delivery. It's Bolt-on. I bought it with insurance. I pray that I will never use it. View detail
Reliable Large Kimono
Because the STAND of F6B which I currently own is not suitable for the car case,
Even buy garage Concrete for shaving off gorigor.
From among the goods of this hand "Large Ki" Because I chose it only,
Especially good, except that it can be used without problems - There is no evaluation of bad.
Although the story warps, Webike's impulse has increased a considerable number,
Like before "Rose Maki" It was stopped.
However, "Selling vehicles" of "Selling items" is.
Overseas products with little information such as no one ever mentioned Impre,
Product information on rare models - Even if you give installation information,
I can not take any awards and waste time.
By saying that, mail order is convenient so I will use it,
I think Impre will not do anymore.
View detail
Fits: KAWASAKI ZX-14R, KAWASAKI ZX-14R, KAWASAKI ZX-14R
Parts I do not want to use.
Parts I do not want to use as much as possible, but wear it with visual effects. Because the color scheme is plain, I thought about putting the enclosed sticker, but since StickerDesign is dasa, I could just wear it. View detail
Fits: YAMAHA FZ1-N 2008, YAMAHA FZ1, YAMAHA FZ1, YAMAHA FZ1, YAMAHA FZ1, YAMAHA FZ1, YAMAHA FZ1, YAMAHA FZ1, YAMAHA FZ1, YAMAHA FZ8, YAMAHA Feather 8, YAMAHA FZ1 Feather, YAMAHA FZ1 Feather, YAMAHA FZ1 Feather, YAMAHA FZ1 Feather, YAMAHA FZ1 Feather, YAMAHA FZ1 Feather, YAMAHA FZ1 Feather, YAMAHA FZ1 Feather
It looks good now but it is reasonable with Balance with Cost
Engine Guard is on sale from each company, but this is considered best if only Cost.
With regard to installation, we completed it in about 10 minutes if it carried out according to the Instruction Manual. Once Jack hit the bottom of the engine lightly and tightened Torque was also 50 N ? m. Extension ROD of Torque wrench is necessary because Bolt head becomes deeper Body. Because Bolt included is Hexagon Bolt, Merit is also unnecessary for some other company's cap screw tip bit..
However, the appearance is inferior compared to other companies. Body is a conical surface slurp and there is a large difference in design such as Design made by another company, decorativeness, Slide mechanism, protrusion length. (Although it is personal subjectivity)
function (I can not confirm it) Cost performance is good and it is expected that damages such as Cowl and footpeg will be suppressed to the Smallest limit from Projection Length which is also a bad appearance.
View detail
Fits: HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA monkey, HONDA monkey, HONDA monkey, HONDA monkey, HONDA monkey, HONDA monkey, HONDA monkey, HONDA monkey, HONDA monkey, HONDA monkey, HONDA monkey
MONKEY (FI) Purchased for Lowdown
Although it is not yet attached, I think that as soon as the other for LowdownParts is complete, I will try to replace it.
Chrome plating has been done and I am looking for replacement.
View detail