Reviews
The quality of modeling is rather good.
Material:Plastic and relatively well formed, there was no BALIetc.
Female thread side has embedded Nut for secure installation.
Well, it's still a bit expensive there, so I hope it's a bit cheaper.
View detail
Fits: KAWASAKI Ninja 250R, KAWASAKI Ninja 250R, KAWASAKI Ninja 250R, KAWASAKI Ninja 250R, KAWASAKI Ninja 250R, KAWASAKI Ninja 250R, KAWASAKI Ninja 250, KAWASAKI Ninja 250, KAWASAKI Ninja 250, KAWASAKI Ninja 250, KAWASAKI Ninja 250, KAWASAKI Ninja 250R
Used for 250DUKE
It is sold for NINJA2 Helmet50, so I bought it for use on 250DUKE at my own risk.
When replacing, there was some interference with the Handlebar Clamp, it was hard, and the Socket size of 22mm and 24mm were required.
View detail
Fits: HONDA NC750X, HONDA CB1300SUPER FOUR SP, HONDA CB1300SUPER FOUR, HONDA CB1300SUPER BOLD'OR SP, HONDA CB1300SUPER BOLD'OR
Clamp set for Attachment Cross Bar
This product is listed in Honda's OEMAttachmentCatalogue and is installed in combination with the Shaft for AttachmentCross Bar.
Current NC750X (from 2021) I purchased this product because the OEM Knuckle guard is attached to the Handlebar Brace, and I thought it would not be possible to install the Handlebar Brace with a regular Handlebar Brace Clamp because of the Cable clip in the mounting position. This product has a thin wall so the cable clip can be easily fended off and installed.
Since the standard outer diameter of 22.2mm can be used for installation, it can be used for other purposes in addition to handlebars, depending on the ingenuity of the user.
I wish they were the same color because the Bolt and Washer are Silver and the color looks floaty lol.
View detail
Fits: HONDA CB1300SUPER FOUR, HONDA CB1300SUPER FOUR SP, HONDA NC750X, HONDA CB1300SUPER BOLD'OR, HONDA CB1300SUPER BOLD'OR SP
Shaft for Attachment Cross Bar
This product is listed in Honda's OEMAttachmentCatalogue and is to be installed in combination with the AttachmentCross Bar Clamp set.
The outer diameter is 22.2mm, the same as a standard handlebar, so attachments can be attached to the handlebar.
Current NC750X (from 2021) This product could be installed with a pre-2021 OEMOption Knuckle guard that does not have an Option setting on the
I do not think it will play the same role as the Handlebar Brace, but it will serve well enough to attach other attachments.
View detail
Fits: HONDA NC750X, HONDA CB1300SUPER FOUR, HONDA CB1300SUPER FOUR SP, HONDA CB1300SUPER BOLD'OR SP, HONDA CB1300SUPER BOLD'OR
Used to install fog on Guard pipe
Material:It's aluminum and fairly thin-walled, so I don't think it's suitable for mounting heavy objects.
It is used to mount a Small Fog Lamp.
22.A 2mm Pipe can be diverted.
I have used the same system in my previous car to install fog lights on the Engine GuardPipe, and I have been using the same system in my new car.
It has been about 2 years in total and no Cracks have occurred.
The Pipe side edge is angled, so it is inevitable that the Pipe will be scratched during mounting and positioning.
It is best to avoid repetition of attaching and detaching, including temporary fixing, as much as possible.
View detail
Fits: HONDA CB1300SUPER FOUR, HONDA CB1300SUPER FOUR SP, HONDA NC750X, HONDA CB1300SUPER BOLD'OR, HONDA CB1300SUPER BOLD'OR SP
Shaft for DAYTONA DAYTONA Attachment Cross Bar
These products are listed in the Honda Genuine Accessories.Catalogue.
The handlebar is black, so I decided to go with black.
I needed it to install Navigation and Camera.
Instead of placing the bar between the Clamp, place the bar on the top side and the Bolt is from the bottom.
View detail
Fits: HONDA NC750X, HONDA CB1300SUPER FOUR SP, HONDA CB1300SUPER FOUR, HONDA CB1300SUPER BOLD'OR SP, HONDA CB1300SUPER BOLD'OR
Clamp set for DAYTONA DAYTONA Attachment Cross Bar
These are the Parts specified in Honda's OEMAttachment.
I added a USB Socket from DAYTONA and external Navigation and ActionCam.
RAM Mount is a good match.
View detail
EDR-21G for Switch
I used it to install the Switch on my EDR-21G.
It's working fine
View detail
Fits: HONDA NC750X, HONDA CB1300SUPER FOUR SP, HONDA CB1300SUPER FOUR, HONDA CB1300SUPER BOLD'OR SP, HONDA CB1300SUPER BOLD'OR
Simple and good.
I bought it because I thought it would be easy and simple to put on afterwards.
The edge where it meets the Handlebar is not beveled.
If the Handlebar is attached to a part that has a slight bend in its shape, the painted surface will be scratched.
I think the material is Duralumin, please pay attention to the tightness of the screw.
The mounting holes for the attachment bar are long holes, so you can't expect the rigidity you need for off-road driving.
If you put your weight on the Handlebar while standing, it will move slightly.
I also raised a Review of the Attachment Bar, and it was strong enough to hold up to a windshield.
It's a 125cc, so it will be checked up to 60km.
View detail
Fits: HONDA NC750X, HONDA CB1300SUPER FOUR SP, HONDA CB1300SUPER FOUR, HONDA CB1300SUPER BOLD'OR SP, HONDA CB1300SUPER BOLD'OR
Note the dimensions
I wanted to add a windshield, so I replaced it with a MINITrail Cross Bar.
The shaft length you select when ordering is the length between the shaft holes.
The product is sturdy and simple, but I would like you to make it easy to understand.
I bought the 200mm, made a mistake, and bought the 250mm again.
In addition, with a nominal length of 250mm, the thickness of the φ22.2 part is 200mm.
I used their Clamp set for Attachment Cross Bar to attach it.
Even with the windshield, there were no strength issues.
It`s a 125 so I`ve only tried it up to 60km/h.
It comes in many colors and is easy to match with Motorcycle.
View detail
Durability is difficult
The shape is good for Compact.
Bolt is tightened from the reverse side, but it is not easy to install.
It worked well as a Bracket for ShiftIndicator.
However, less than a year later, a crack occurred in the female screw part of the embedding.
The axial force of Bolt should not have done Large, because it is fixed in between Rubber.
Probably the problem is that the resin is halfway too hard and not tough enough.
I don't think anyone is going to fix heavy objects to this.
I thought it would be better to use a softer resin.
Or a clicky Material:Aluminum?
The shape is good and needs improvement.
View detail
Various mounting options for Handlebar/Handlebar Brace
The JA55 CT125CT110 HUNTER CUB has a generator output of 190W to match its engine displacement volume, so you can't increase the attachment of the electrical system too much.
But DriveRecorder is the first priority, so I installed a Chinese DriveRecorder
I installed this Bracket on the Handlebar Brace, which is easy to check while driving because it is a main unit with monitor.
It seems to have been stuck on reasonably firmly though it was only stuck on with 3M Strong Double-sided Tape
It is impossible to make a hole with Drill because there is no space in the back side, though it is sufficient if it is not so heavy.
It's not a bad product if you use it as not a bracket to install more than a small object.
View detail
The w650 requires a total of 8 cards.
The W650's Handlebar has 1Inch to Top Bridge and Switches. Made by HURRICANE, the Universal Handle (Classic80 in Top BridgeQuantity:Pair (for Left and Right) 1Quantity:Set, 1Quantity for Switches:Set total of 2Quantity:Set is required.
DAYTONA's Handlebar Spacer is a Quantity:Pair (for Left and Right) The Handlebar by Made by HURRICANE Spacer costs about $1,500 and is more expensive, but it comes in 8 pieces and doesn't stick out, so it's clean and If you're looking to customize, HURRICANE might be the way to go.
View detail
Versatile Bracket
Material:Plastic and lightweight bracket
I bought it for the voltmeter and the Droreco Switch
Because the flat surface is large and surprisingly solidly made, you can install various small things I think it is a useful product to
If you're not sure where to put your Switch or Antennas, this is about as good as it gets anyway won't (or can't) you?
View detail
Fits: KAWASAKI Ninja 250R, KAWASAKI Ninja 250R, KAWASAKI Ninja 250R, KAWASAKI Ninja 250R, KAWASAKI Ninja 250R, KAWASAKI Ninja 250R, KAWASAKI Ninja 250, KAWASAKI Ninja 250, KAWASAKI Ninja 250, KAWASAKI Ninja 250, KAWASAKI Ninja 250, KAWASAKI Ninja 250R
For RC,
It can also be used for KTM. I seemed to be able to use it at first glance, so I tried purchasing it for trial, but it was batched in RC 390. The bar chose the one of the Standard Type, but it seems that Short was better, so it is planned to replace it. View detail
Fitting is the best
I bought it for attaching a clamp holder to the child's YZF-R25 Stem. Although it was also on other sites, fixed Bolt rusts. Those who do not mind have no problem, but since they are the first place to go, I use them separately. Fitting is the best because it is a dedicated Type. View detail
Attach to YZF-r25
I bought it for wearing iphone with RAM Mount. A 22 mm hexagon is required for installation. OEM's Stem Nut is incompatible with Top Bridge at Silver, but this is Black color so it's excellent with the Top Bridge. I used Stainless Steel 8 mm Cap bolt I bought at Homsen because the attached 8 mm Cap bolt was to rust soon.
View detail
For CameraMount
It is very helpful to have products that allow hands to reach such itchy places
It is a commodity that only Bolt hole is opened in the head of Stem Center Bolt
OEM Silver's Center bolt was accelerating the cheapness around Handlebar
This product is Black color I feel a little cheapness has been relaxed
The attached Hexagon Bolt is changing to Stainless's Bolt because it seems to be RACING rust by Sokko
I attached DAYTONA's Multi Bar Holder
It is possible to mount Camera with this though it is messed up
View detail
Mount Bolt YZF-R25 Mounting
I think that I thought well of Mr. DAYTONA Ideas product
Thinking about the trouble of drilling yourself ( - ∀ - ) Is it OK !!
But if you think normally, it is high w
One drawback is one
It rusts.. I will rust a bait
Let's change to Stainless bolt ('A`)
View detail
Fits: KAWASAKI Ninja 250R, KAWASAKI Ninja 250R, KAWASAKI Ninja 250R, KAWASAKI Ninja 250R, KAWASAKI Ninja 250R, KAWASAKI Ninja 250R, KAWASAKI Ninja 250, KAWASAKI Ninja 250, KAWASAKI Ninja 250, KAWASAKI Ninja 250, KAWASAKI Ninja 250, KAWASAKI Ninja 250R
For installation of Navigation.
Combining Universal Bracket, Navigation (JupiterYPL520) I purchased it to Center mount.
Given the price, it is better to take a quicker step than setting up a Tap on OEMStem Bolt.
Cap bolt for fixing is M8Size, so please be careful when purchasing Bracket.
As a disappointing thing, as other people have said, Cap bolt's Rust. I am using it as it is - - -.
View detail